Used Controller for sale (47,132)

Condition: excellent (used), Year of construction: 2014, ABB IRB7600-340/2.8 + IRC5 controller + TPU DEVELOPMENT OF GSG ROBOTICS Gsdpfx Aszxbmgjk Ueug GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, offering extensive service coverage for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Guedpfx Aksz Aqx Hs Usg Spindle nose: 100-700 mm Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, Log infeed Reducer Debarking Block conveyor EWD ZE infeed table Microtec 3D measurement Spaner FZ3 Roller unit EWD EVW Godpfx Ajz Ar N Hek Usug Flexible double-shaft circular saw EWD DWK 700 T-6 6 flexible saw axes Cutting height 60-340 mm 2x200 kW Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK, Log infeed Reducer Debarking Block conveyor EWD ZE infeed table Microtec 3D measurement Spaner FZ3 Roller unit EWD EVW Flexible double-shaft circular saw EWD DWK 700 T-6 6 flexible saw axes Cutting height 60-340 mm Gsdpfx Asz Ar N Tjk Uoug 2x200 kW Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Guedpoz Aqxaofx Ak Ueg Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: new, Weldguide IV, a professional seam tracking system for monitoring and controlling welding processes. Suitable for automated and robotic welding applications. Gusdpfx Aez Ar Dkek Ueg

Condition: used, FOR SALE – 4x ABB INDUSTRIAL DRIVE CABINETS Gjdszz Sbyepfx Ak Ueug Available in stock: 3x ABB ACS800-07-0135-3 – 225 A 1x ABB ACS880-07-0206A-3 – 206 A / 143 kVA ✅ Used, good condition ✅ Complete drive cabinets ✅ For heavy-duty industrial applications ✅ Available immediately 📍 EXW Rotterdam, The Netherlands Available as a complete set or individually. SURPLUS – Industrial Solutions ♻️ From Surplus to Second Life

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Gsdpsz Aqlmefx Ak Ujug Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw chuck Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 113201690006, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, This device is a component of an entire production line, which has not been in use since 2022. The entire line consists of 6 such devices, which are grouped in pairs. Each pair of devices has its own control cabinet/switchboard. The entire system is controlled from a main switchboard. The entire system, or individual components, will be sold. Gusdpfx Akszt Nprs Usg

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Hydraulics – Control block for a 40-liter pump. Four identical units are available. Gujdjzk Exdjpfx Ak Ujg Price per block: €400. These have not yet been installed.

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, A06B-6047-H003 will be refurbished and tested upon purchase of this product. 12 units in stock. Gujdpszz Ih Ajfx Ak Uog Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 3,000 mm, turning diameter: 700 mm, SMTCL CAK80285D CNC horizontal lathe, year of construction 2011, with original FANUC control. Offered for sale by the first owner. All maintenance has been carried out without exception; the machine is still in active, trouble-free production use. It has not been heavily used - a machine with plenty of life left. Bed ways and slide surfaces are clean and in very good condition. Technical data: - Turning diameter over bed: 700 mm Gedpfxoz An Ryj Ak Usug - Turning diameter over cross slide: 500 mm - Turning length / machining capacity: 3,000 mm (3 m) - Control: FANUC (original) Can be inspected under power in our workshop and is ready for immediate delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 10,982 h, load capacity: 2,000 kg, lifting height: 6,455 mm, free lift: 2,260 mm, fuel type: electric, mast type: triplex, construction height: 2,825 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), overall weight: 3,637 kg, total height: 2,825 mm, total length: 2,000 mm, total width: 1,450 mm, fuel: electricity, Equipment: sideshift, STILL FM-SE 20 – Reach trucks Guedsz Aqbzspfx Ak Uog TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 6.455 mm Closed height: 2.825 mm Free lift: 2.260 mm Mast: Triplex (3F645) Fork length: 1.150 mm Fork carriage: FEM 2B Drive: Elektro 48V Battery: 48 V 620Ah v. 2019 Tyres: Superelastik SE 200/50 - 10 (20%) Service weight: 3.637 kg Length: 2.000 mm Width: 1.450 mm Year of manufacture: 2010 Operating hours: 10.982 h Condition: ready to drive EQUIPMENT 4th valve, Front work lights, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309287 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Serial No.: 14-22267 Guodpfx Akjzvypzs Uog Total operating hours recorded: 64,363 h Robot teach pendant

Condition: used, functionality: unexamined, Siemens SIMATIC S5 Spare Parts Lot / Assemblies / Power Supplies / Modules / Rack Construction For sale is an extensive lot of Siemens SIMATIC S5 spare parts, as well as additional Siemens components from the field of automation and control technology. The parts were professionally removed from an operational system. No further functional testing was carried out. Therefore, the sale is as used / untested and exclusively for commercial buyers. This lot is ideal as a source of spare parts for existing systems, retrofits, repairs, stockpiling, or targeted removal of individual modules. Included are, among others: 4x SITOP Power 5 – 6EP1 333-1SL11 5x SIMATIC S5-95U – 6ES5 095-8MA04 13x SIMATIC S5 – 6ES5 482-8MA13 12x SIMATIC S5 – 6ES5 421-8MA12 4x SIMATIC S5 – 6ES5 441-8MA11 1x SIMATIC S5 – 6ES5 521-8MB11 3x SIMATIC S5 – 6ES5 521-8MB12 4x SIMATIC S5 – 6ES5 470-8MB12 1x SIMATIC S5-100U – 6ES5 103-8MA03 1x SIMATIC S5-100U – 6ES5 103-8MA02 16x SIMATIC S5 BUS Module – 6ES5 700-8MA11 1x SIRIUS – 3RW4027-1BB14 1x Siemens – 6EW1380-1AA 1x SIMATIC NET CP for Profibus – 6GK7342-5DA01-0XE0 2x SIMATIC S5 – 6ES5 095-8MA05 1x SIMATIC S5 – 6ES5 942-7UA13 1x SIMATIC S5 – 6ES5 943-7UA22 1x SIMATIC S5 – 6ES5 470-7LA12 1x SIMATIC S5 – 6ES5 135-3KA13 8x SIMATIC S5 Memory Modules 1x SIMATIC S5 – 6ES5 375-1LA15 1x SIMATIC S5 – 6ES5 375-1LA14 2x SIMATIC S5 – 6ES5 375-1LA21 1x LOGO!Power – 6EP 1332-1SH43 2x SIRIUS – 3RT2017-2AP01 1x Siemens SIMATIC S5 Rack Construction Condition: - Used Gusdpfey Scg Dsx Ak Ueg - Untested - Professionally removed from an operational system - Age- and usage-related storage, operational, and dismantling marks - Sale as shown in photos and described in the item description Scope of delivery: Exactly the lot shown and described will be delivered. For details, see item description. Note: The sale is expressly as a used spare parts lot, without any guarantee of completeness, functionality of individual modules, or suitability for a specific purpose. Ideal for specialized companies, maintenance businesses, and dealers.

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Guodpez Ar Ezofx Ak Usg

Condition: used, Cast iron control/tracing marble Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T Godpfozww Ukjx Ak Usug

Condition: ready for operation (used), Festo EMMS-AS-100-S-HS-RMB 550125 servo motor, serial number J8N4265, used, in good condition, 100% functional, scope of delivery as shown in the photos. Godpfxezzuqdo Ak Uoug

Condition: excellent (used), functionality: fully functional, Siemens SINAMICS S120 Testing and Repair System – Motor Modules For sale is a professional testing and repair system for Siemens SINAMICS S120 motor modules. The test system was designed for testing, diagnosing, troubleshooting, and performing functional checks on Siemens SINAMICS S120 power modules. Suitable for testing various: • SINAMICS S120 Single Motor Modules • SINAMICS S120 Double Motor Modules • Booksize Motor Modules • various power and current classes Including modules from the following series: 6SL3… Single Motor Modules 6SL3… Double Motor Modules The test system is particularly suitable for: • Repair and overhaul of SINAMICS S120 modules • Functional testing after repair • Fault diagnosis and troubleshooting • Testing of power units and electronics • Service and maintenance • Workshops and repair businesses • Testing of used or refurbished modules Godpfjzzlrlox Ak Ujug The complete testing and repair system, as shown in the pictures, is being sold. An ideal setup for companies in the fields of industrial electronics, drive technology, CNC service, repair, and maintenance.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,250 h, load capacity: 4,500 kg, lifting height: 4,450 mm, fuel type: electric, mast type: telescopic, construction height: 3,050 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,500 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 7.00 - 15, rear tire type: superelastic tires (black), rear tire size: 21 x 8 - 9, overall weight: 6,866 kg, total height: 3,050 mm, total length: 3,000 mm, total width: 1,700 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-45 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.500 kg Lifting height: 4.450 mm Closed height: 3.050 mm Mast: Standard (2W445) Fork length: 1.500 mm Fork carriage: 3A Drive: Elektro 80V Battery: 80 V 930 Ah v. 2016 Charger: Dreiphasig 80 V 125 At tested Tyres: Superelastik SE 7.00 - %) / 21 x 8 - 9 Service weight: 6.866 kg Length: 3.000 mm Width: 1.700 mm Year of manufacture: 2011 Operating hours: 7.250 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309247 Location: 14974 Ludwigsfelde bei Berlin Gjdpfx Aksz Aqils Ujug Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, TOS Varnsdorf WHQ 13.8 CNC table type horizontal boring mill, year of construction 2000, made in the Czech Republic. The machine is controlled by an original Heidenhain TNC 430 CNC with the Heidenhain operating panel and runs programs produced with CAM software. The control cabinet air conditioning unit was replaced one year ago. The machine is well maintained and in full working order. Technical data: - Control: Heidenhain TNC 430 - Spindle diameter: 130 mm - Spindle speed: 10 - 2,500 rpm - Tool taper: ISO SK 50 Gjdez Ap Awjpfx Ak Uoug - X travel: 3,500 mm - Y travel (vertical axis): 2,500 mm - Z travel: 1,250 mm - Table size: 2,200 x 1,800 mm - Operator platform with 250 kg load capacity - Air conditioning unit fitted one year ago - Programmable via CAM software The machine can be inspected under power in our workshop.

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, A06B-6066-H006 will be refurbished and tested upon purchase of this product. 3 units in stock. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our CNC-Service website. Gusdpfxsz Ah T Ie Ak Ueg Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT Guodpfx Akezzkvcj Ujg CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 700 mm Travel distance Y :450 mm Travel distance Z: 420 mm max. workpiece size X: 910 mm max. workpiece size Y: 660 mm max. workpiece size Z: 400 mm max. workpiece weight: 1200 kg table size X: 650 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +101 generator: 30 Ampere submerged cooling unit CNC wire EDM machine 5 CNC axes: X / Y / Z / U / V Automatic wire threading Dual Water Jet with Annealer Automatic wire break recovery 15" TFT touchscreen Linear glass scales in X / Y Dielectric chiller Automatic temperature control Max. table load: 1,200 kg Max. machining current: 30 A Programmable wire tension: 2–30 N Gjdpfjz Aq Dvjx Ak Uoug Standard wire spool: 16 kg Machine weight: approx. 6,000 kg

Condition: repair required (used), functionality: limited functionality, Year of construction: 2007, operating hours: 31,489 h, control type: NC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser hours: 22,804 h, laser power: 4,000 W, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 3,000 mm, AMADA LC3015 X1 NT – Complete Automated Laser Cutting Cell Godpfx Aozi Uc Njk Usug -The AMADA LC3015 X1 NT is a fully automated CNC laser cutting cell designed for efficient, high-volume sheet metal production with minimal operator intervention. -The installation includes the AMADA LC3015 X1 NT laser machine, an AS LUL 300 X1 automated tower system, a 4 kW Mitsubishi ML40CFX CO₂ resonator, a Riedel industrial chiller, and a Donaldson Torit extraction and filtration system. -Manufactured in Japan in 2007, the machine offers a working area of 3,000 × 1,500 mm and delivers reliable, precision laser cutting performance. -The 4 kW laser is capable of cutting mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. -The automated tower system features eight storage cassettes with a load capacity of 3,000 kg each, enabling automatic material loading, unloading, and pallet exchange for continuous production. -A vacuum sheet handling system further improves productivity by reducing manual material handling. -The Riedel dual-circuit chiller provides efficient cooling for both the laser source and optical components, ensuring stable operation. -The Donaldson Torit filtration system effectively removes fumes and metal particles generated during the cutting process, maintaining a clean and safe working environment. -This complete AMADA/Mitsubishi solution combines automation, reliability, productivity, and integrated cooling and filtration systems, making it an excellent choice for demanding industrial manufacturing applications.