Used Control Switch for sale (46,696)

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Psdex Ux Ivepfx Ah Hsgg Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: reconditioned (used), Year of construction: 2002, Cycle-controlled lathe GILDEMEISTER NEF 320 With MANUAL PLUS 4110 control Year of manufacture: 2002 Spindle bore: 50.8 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Center height: 160 mm Speed range: 10 – 4000 rpm, stepless With the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck Schunk ROTA – S plus Ø 200 mm 2 sets of soft top jaws ICP contour programming Tailstock with extendable quill Chip tray Pgodpfx Ajxn Apbsh Heg Coolant system Chip rinse gun 6 machine feet Operating manual

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Pgodpfx Ahouzyw Dj Hog Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, machine/vehicle number: CD038A0W9180007, input current: 40 A, Frequency converters Allen-Bradley PowerFlex400, Series A, 22C-D038A103, 18.5 kW, 40 A, S/N CD038A0W9180007. 2 pcs. in stock. Pgjdpovwk H Defx Ah Hjg Also available are Allen-Bradley PowerFlex700H, Series B, 132 kW, 232 A. S/N 12082007, Mitsubishi A500, FR-A540L-132K-E1, 135kW, 243A, C4C9186-H04, Mitsubishi F700, FR-AF740-03610-EC, F41R43, 132kW, 232A, ABB 132kW, 241A, ACS880-01-246A-3+E200, ser.nr. 1174301299.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross slide: 150 mm Max. turning length between centers: 750 mm Pgsdpfoycf Rxsx Ah Heg Max. spindle bore: 50 mm Motor power: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolholder system Documentation and accessories Machine is powered up for inspection

Condition: good (used), Year of construction: 2008, clamping force: 1,700 kN, Equipment: documentation/manual, NC5 control Clamping force: 170 t Screw diameter: 45 mm Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Pgjdpfex Ury Eex Ah Hog Type: Horizontal Drive: Hydraulic

Condition: good (used), Safety controller, safety relays, standard master device -Manufacturer: REER, Standard Master Device, 8 inputs, 2 OSSD pairs (SIL 3) -Type: MOSAIC M1 Pjdpfx Ahox T A Nbe Hogg -Charge: -Number: 1x Relays available -Dimensions: 110/25/H115 mm -Weight: 0.2 kg

Condition: used, Year of construction: 1992, miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage. Additional title: Fill level inspection system Capacity: 24000 b/h Operation / Control: at control box Material: Painted steel / stainless steel Pjdpfx Ahsx T An Dj Hsgg Position: free-standing / mounted on bottle transport Base construction: Housing with evaluation electronics with tubular frame on spherical feet Features: Measuring device, control electronics, bottle ejector

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch Pgodpfx Aox T Ab Deh Hsg -Manufacturer: Hirschmann, Ethernet Switch Rail Switch -Type: SPIDER 4TX/1FX EEC -Dimensions: 115/80/H25 mm -Weight: 0.1 kg

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch -Manufacturer: Siemens, Ethernet Switch Scalance XB008 8-port -Type: 6GK5008-0BA10-1AB2 Psdpfsx Tzh Nsx Ah Hegg -Dimensions: 110/45/H85 mm -Weight: 0.2 kg

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 6 kg, input voltage: 380 V, type of input current: three-phase, input frequency: 50 Hz, protection type (IP code): IP20, warranty duration: 24 months, power: 11 kW (14.96 HP), nominal power: 11 kW (14.96 HP), We offer this new Danfoss FC-051P1K7E20H2X5XXX Danfoss VLT Micro Drive FC51, year of manufacture 2023. Type: FC-051P1K7E20H2X5XXX Article number (P/N): 132F0058 Pgedpfoyb T Aasx Ah Hog Serial number (S/N): 636417A191 Power: 11 kW Power: 15 HP Input voltage: 3×380-480 V Input frequency: 50/60 Hz Input current at 50 Hz: 38.0 A Input current at 60 Hz: 29.0 A Output frequency: 0-400 Hz Output current at 50 Hz: 23.0 A Output current at 60 Hz: 21.0 A Protection class: IP20 Without display, individual item. If you have any questions or require further information, feel free to send us a message or call us. Stock: 30+ units available.

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Pgsdpew Enqusfx Ah Hjg Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design (solid neutral, heavy-duty models) Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 (indoor) Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 12 units in stock

Condition: used, Year of construction: 2003, Cutting capacity: 5300 x 2240 x 80 mm Motor: 5.5 kW (7.5 HP) Saw blade: 300 mm Vertical cutting interface distance: 1000 mm Feed speed: 10-25 m/min Four-sided edging Pre-scoring saw unit freestanding Storage location: Nattheim Pjdpfx Ahex Twdao Hogg

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Pgsdpfoxhcklex Ah Hog Year of manufacture: 2011 The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), mileage: 7,086 km, power: 132 kW (179.47 HP), first registration: 11/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 65 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 6,250 mm, total width: 2,150 mm, total height: 2,800 mm, Year of construction: 2024, General Information Number of doors: 2 Cabin: single Registration: V-02-JJG Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: Automatic, 6 gears, automatic Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Weights Unladen weight: 2,715 kg Payload: 785 kg Gross vehicle weight: 3,500 kg Maintenance APK (Periodic Technical Inspection): valid until 11/2027 Condition Pjdpfoyba Trex Ah Hogg Technical condition: very good Optical condition: very good Damage: none Financial Information Price: On request VAT/margin scheme: VAT deductible Further Information Please contact Jelmer Broekhuizen, Mike Kornet or John De Frankrijker for further information.

Year of construction: 2017, operating hours: 31 h, condition: excellent (used), Used and barely operated hot water steam system from market leader HEATWEED - Environmentally friendly and chemical-free solution for eliminating weeds, moss, and unwanted vegetation Pgsdow Nx E Njpfx Ah Hog - Forklift-compatible with pallet fork pickup - Suitable for private, commercial, and municipal use - Perfect addition for landscaping, gardening, or street cleaning service providers - Model: HEATWEED 22/8 - Efficient petrol engine - Year of manufacture: 2017 - Only 31 operating hours - Constant water temperature between 98° and 99° Celsius - 500-liter water tank - Weed lance - Hose reel with 15m length - Usable and extendable up to 45m - Daily cleaning capacity of 1,700 – 2,500 m² - Water consumption up to 8 liters per minute - Pressure continuously adjustable up to 50 bar - Noise level: 76 dB - Tank capacity: 31 liters - Net weight: 310 kg - Combined frame for unit and water tank - Dimensions (L x W x H): 1,050 x 800 x 1,035 mm - Technical documentation available - Original price: €19,800 net Shipping on pallet possible

Condition: excellent (used), Aleen Bradley 240 V DC Power Supply CAT 1756 PB 72 (28685 I) Pgsdpfx Ajx Tplijh Hsg

Condition: excellent (used), contactor control Pgsdpfxef Ey Ede Ah Heg Polu Box Make DEMAG with documents

Condition: used, Year of construction: 2008, Working area Circulation dia. above bed slide way cover: 680mm Circulation dia. above cross guide cover: 565 mm Facing traverse: 324 mm Longitudinal path: 600 mm Main spindle Spindle nose dia: 170 h5 / 220 h5 mm Bar dia. Max: 65 / 90 mm Spindle nose dia. in front bearing: 120 / 150 mm Spindle boring: 79 / 110 mm Chuck dia: 200 / 250 / 315 mm Drive rating S1 100% duty cycle: 25 / 33 kW Rotational speed range: 5000 / 4000 r.p.m Max. torque S1 100% duty cycle: 270 / 375 Nm Salient rotational speed: 900 / 850 r.p.m C axis (main spindle) Rotational speed: 250 r.p.m Stopping torque: 200 Nm Division accuracy: 0,025 deg. Compound slide X/Z/Y Facing traverse X: 260 / 1852 mm Longitudinal path Z: 635 / 6202 mm Ball spindle Z (dxh): 40x15 mm Vertical path Y: ±40 mm Ball spindle Y (dxh): 40x5 mm Rapid traverse speed X/Y/Z: 60/15/45 m/min Feed force X/Y/Z: 3,5/7/7 kN Tool holder Number of tool stations: 12 Tool mounting cylinder shaft (DIN 69880): 40 mm Tool disk, axial tool holder pitch circle dia: 370 mm Number of driven tools: 12 Drive rating max. 100% duty cycle: 4,9 kW Torque 100% duty cycle: 10,5 Nm Rotational speed range: 4500 r.p.m Tailstock Tailstock traverse path: 580 mm Tailstock force: 8 kN Tailstock mounting: MT 5 Rapid traverse speed Z2: 6 m/min Part accuracy for positioning: =/< 10 mm Hydraulic Contents: 40 l Pump capacity: 2,2 kW Max. pressure: 80 bar Pressure for clamping unit, tailstock: 10-60 bar Pgedjya Iirepfx Ah Hog Coolant unit Contents: 210 l Pump capacity: 1,7 kW Feed rate at 6 bar: 20 l/min Electrical energy requirement Connected rating: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuses (slow blow/VDE 0100) perm: 80 A Voltage fluctuations at 400 V: 6% - 10% Machine dimensions Dimensions (LxWxH) with chip conveyor: 4350/2460/2080 mm Weight without chip conveyor/chip bath: ca. 6.000 kg Workplace based constant noise pressure level: - (DIN 45635 part 1-04.85 (ISO 3740-1980), measured as a chip removing cycle as per DIN 45635 part 1601-07.78): 77 db (A) - in idle running as per DIN 45635 part 1601-07.78: 78 db (A)

Condition: used, Year of construction: 2012, operating hours: 554 h, functionality: fully functional, Mitsubishi FB16CPN Electric Forklift truck. In very good condition and working order. Year 2012 1 pervious owner from new! Have original purchase receipt of £20k plus. Truck is registered With the UK DVLA to be able to drive truck on the road. Digital Display allows you to see what speed you are doing and also displays the weight you are lifting. Comes complete with Single Phase Battery charger, Spare keys and Handbook. See last photo of trucks Features. Collection and inspection is Tadley UK (Near Reading) Specification: Mitsubishi FB16CPN Electric Folklift truck Capacity: Nominal 1600kg at 500mm Load centre With sideshift: 1600kg at 500mm Load centre at full height With sideshift: 1425kg at 600mm Load centre at full height Mast: Simplex 2 stage clear view Pgsdsx Nbn Ispfx Ah Hog Lift height: 3290mm Closed height: 2125mm Tyres: Solid Pneumatic profile Folks: 1000mm Long Single phase battery charger

Condition: excellent (used), Allen Bradley Panel View Plus 1000 CAT SER 2711P-RDT. 10 C Pgedex Td U Ejpfx Ah Heg

Condition: used, Year of construction: 2008, weight of the machine ca. 8,8 t dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Pjdpfxoyat Hvs Ah Hegg Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Year of construction: 2012, condition: used, E-CG-CONTROL For injection moulding machine Pgjdpexr Ut Hefx Ah Hjg Engel

Year of construction: 1991, condition: good (used), Switch cabinet Engel, year of manufacture 1991 Pgodpfx Ajx A Iqaeh Hsg

Condition: excellent (used), Injection molding technology module TX DAIS RX DAIS 2 STK control card Demag Pjdpfoqxdnlox Ah Hogg