Used Construction Steel Benders for sale (31,686)

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Iedpjzi Ra Refx Aa Esaw Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, machine/vehicle number: ...630, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Isdpfx Aey Ihu Ssa Ejaw Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: used, functionality: fully functional, machine/vehicle number: ...634, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device Iajdpfx Aajy Ih A Ns Ejw -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: good (used), empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 03/2022 Tare weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible gross weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles! -- STEEL FLOOR! -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous interior side aluminium wear plates -- Aluminium body -- Swing rear doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Standing platform at front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 Tread approx. 70% / 80% / 90% -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Looking to trade in your used trailer? We will gladly accept it on trade-in upon agreement. This offer is subject to change and non-binding. Errors and prior sale excepted. Iodevx E N Aopfx Aa Ejaw

Condition: good (used), functionality: fully functional, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Model: J-Series S1 First registration: 03.2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible total weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles - STEEL FLOOR - ALUMINIUM chassis - Volume: approx. 92 m³ - Reinforced walls, continuous aluminium wear plates along the interior sides - Aluminium body - Portal doors Iodpfeym En Sox Aa Ejaw - ABS/EBS - SAF axles - Lift axle - Disc brakes - Air suspension - Sliding roof tarpaulin - Standing platform at front wall - Hydraulic lifting and lowering system - Radio remote control - Toolbox - Underrun protection - Spare wheel holder - Tyres: 385/65 R22.5; tread approx. 70% / 80% / 90% - etc. Would you like to visit us? We offer a free pick-up service from Linz train station (4020 Linz). We handle all customs formalities for you. Want to trade in your current vehicle? If we reach an agreement, we are happy to accept your trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Condition: excellent (used), We have 140 heavy duty stainless steel cooking racks available. Can be used for cooling or defrosting. Ijdpfozi Em Sox Aa Eeaw Dimensions 1000mm x 800mm wire trays on 1200mm heavy duty frames. 7 shelves on each one.

Condition: excellent (used), functionality: fully functional, Krupp/Hydraulic Hammer/Demolition Hammer/Chisel • Quick coupler: CW30, used • 2 hydraulic connections • Total weight: 1500 kg • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. Iodpfx Aaozi Dnzo Eoaw - Sale subject to our general terms and conditions.

Condition: excellent (used), mileage: 340,698 km, power: 427 kW (580.56 HP), first registration: 01/2018, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: AdBlue, Bluetooth, air conditioning, central locking, cruise control, retarder, seat heater, trailer coupling, - Aluminum fuel tank - DAB radio - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Automatic heating system - Tow hitch Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 90%; Tire tread depth right: 90%; Suspension: Leaf spring suspension Rear axle 1: Double-tired; Tire tread depth left (inner): 90%; Tire tread depth left (outer): 90%; Tire tread depth right (inner): 90%; Tire tread depth right (outer): 90%; Suspension: Air suspension Rear axle 2: Double-tired; Tire tread depth left (inner): 90%; Tire tread depth left (outer): 90%; Tire tread depth right (inner): 90%; Tire tread depth right (outer): 90%; Suspension: Air suspension Weights Unladen weight: 14,035 kg Payload: 13,965 kg GVWR: 28,000 kg Interior Upholstery: Leather Condition Technical condition: very good Optical condition: very good Additional Information Please contact Job van Eldik for further information. Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available daily to assist you in finding the right vehicle. Would you like to see for yourself? Simply arrange a test drive and experience the vehicle firsthand. At KW-Automotive, you will find a wide selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This guarantees that you will find a vehicle that meets your requirements and your budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personalized service Reliable vehicles Attractive prices Fast delivery, so you can get started right away Quick communication by phone and WhatsApp Sales and delivery also to foreign countries For many years, we have been a reliable partner for our customers – and we are proud of that. Iodpfx Aasyxfx Ae Eeaw Please note: All sales prices are plus preparation and delivery costs. Would you like to learn more about a specific vehicle? Visit our website for detailed information, videos, and technical details. Do you need a quick answer? Simply write to us via WhatsApp! We will send you further information, photos, or a video promptly. Job van Eldik

Condition: new, Year of construction: 2026, tubebender-mandrelbender Zopf 32 H with small digital for programming mandrel length 3000 mm bending capacity round tube up to 32 x 2,0 mm mild steel maximum bending radius 275 mm minimum bending radius 36 mm maximum bending angle 180 degrees motor 2,2 KW main motor hydraulic motor 1,5 KW Iaodpfx Aajfh Nz Te Esw hydraulic clamping of tube weight 400 kg 400 volt 50 Hz 3 ph.

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Iaodjuluhwjpfx Aa Esw Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT Iedpfxszk Nits Aa Eeaw MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: used, Year of construction: 2014, tank capacity: 1,000 l, total width: 1,000 mm, total height: 1,850 mm, empty load weight: 128 kg, temperature: 130 °C, Transport container made of stainless steel (stackable) with a capacity of 1000 liters (food-safe) Ijdpfx Aaju Ni Ube Esaw Forward-pulled outlet with disc valve

Condition: refurbished (used), 100,000 liter buffer tank / pressure vessel, standing on a stand ring Vessel data: Volume: approx. 100,000 liters Operating pressure: max. 2 bar Operating temperature: max. 90°C Inner diameter: 3,000 mm Total height with feet: approx. 16,750 mm Ground clearance: approx. 800 mm Vessel with dished ends. Tank Equipment: ⦁ 1 DN 600 manhole with blind cover ⦁ 7x 3/8" pipes, closed inside the tank, open outside ⦁ 2 lifting eyes in the shell area ⦁ 2 lifting eyes on the top of the tank ⦁ 2 lifting eyes on the tank feet ⦁ 1 2" drain, connected to the side of the shell with a ball valve ⦁ 1 Ø33.7 x 3.6 mm vent, connected to the side of the tank and down outside the insulation, with a ball valve ⦁ 1 DN 125 connection, ending in a flange on the outside, and connected to the center of the tank with a 90° bend ⦁ 1 DN 125 connection, ending in a flange on the outside, connected to the top of the tank and connected to the center of the tank via 2x 90° bends Iedpfjwf N Stjx Aa Eeaw We are happy to offer the new tank insulation in any thickness upon request. Please contact us if you are interested!

Condition: used, Year of construction: 2014, tank capacity: 800 l, total width: 1,000 mm, total height: 1,850 mm, empty load weight: 127 kg, pressure: 1 bar, temperature: 130 °C, Stainless steel transport container (stackable) with a capacity of 800 liters (food-safe) Iodpfx Asu Ni N Eja Ejaw

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Iodpfoziwnbox Aa Esaw Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Iajdpfx Aeyfta Tsa Eew Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Crane track rails – steel beams HE-B 300 from an 11-meter long hall Beam width: 300 mm Beam height: 300 mm Middle web: 11 mm Track rail: 50 x 30 mm Beam length: 2 x 10550 mm (total length 21100 mm) - A 5-ton crane ran on these crane track rails. Iasdpfjzinz Eox Aa Ejw - It was installed in a 10-meter hall. - The beams are one-piece, without a butt flange joint. - Consisting of 2 x 10550 mm - White painted Self-weight per meter of crane track rail: 120 kg + 11.7 kg = 131.7 kg/m Self-weight of the crane track rails: approx. 2780 kg

Condition: used, Used Vrieco approximately 300 litre capacity stainless steel conical mixer. Mixing cone measures approximately 1,200mm top diameter x 1,500mm high. Has top mounted electric drive / gearbox for stainless steel screw and stainless steel orbit arm. Has bottom outlet with valve. Unit is mounted in stainless steel frame with (4) legs. Iajdpfjzindmsx Aa Eew

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Dimensions: 2,150mm tan to tan x 1,600mm diameter Iaodpozim A Isfx Aa Eew

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Iaedpfx Aaozimxpo Eow

Condition: used, Used GEA Westfalia model FSD 1-06-107 stainless steel disc bowl centrifuge. Clarifier design with total capacity 1 litre and solids holding space 0.5 litre. Heavy liquid 1.0 kg/dm3 and solids 1.4 kg/dm3 solids. Maximum speed rated 10,000rpm. Centripetal pump output up to 300 l/h depending on medium. Belt driven by 1.1 kW 220/380 volt 3/50 3,000 rpm motor. Mounted on skid with HMI control panel and stainless steel collection pot. New 2018. Iaedpfxszimv Uj Aa Eow

Condition: used, empty load weight: 6,787 kg, axle configuration: 3 axles, first registration: 03/2024, loading space length: 8,300 mm, loading space width: 1,460 mm, loading space height: 2,354 mm, loading space volume: 28 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 5,800 mm, color: white, Year of construction: 2024, Equipment: ABS, Tare weight: 6787kg, Loading area (L W H): 8,300 mm x 1,460 mm x 2,354 mmTyre size: 385/65 R22.5, Loading area volume: 28 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle, Electronic Brake System EBS, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Iaodpszk Rytsfx Aa Eew

Condition: new, Maximum tank capacity: 60 L Lifting and tilting function Battery life: 8 hours Battery: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net weight: 115 kg Stainless steel construction Mobile unit on casters User-friendly control panel Battery level display Automatic tank locking Tank can be tilted at any height Increased lifting height available upon request Iaedpfx Aszk Hf Eea Esw Adaptable to any type of tank Dimensions: 820 x 810 x 2200 mm Top width: 965 mm Usable height: 1550 mm Key advantages Mobile tank lifter suitable for professional use in catering and hospitality settings Lifting and tilting function to facilitate unloading Stainless steel construction for a clean and durable work environment Easy movement thanks to integrated casters Battery-powered operation without permanent connection Control screen indicating battery charge level Automatic tank locking in the arms Tank can be tilted at any required height depending on the application Higher lifting height available upon manufacturer's request Adaptable to any type or brand of tank according to configuration Detailed technical specifications Model: LIFTO 60 Type of equipment: Mobile tank lifter with tilting function Brand: Sinmag Europe Maximum tank capacity: 60 L Tilting: Yes Battery life: 8 hours Battery capacity: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net machine weight: 115 kg Total height: 2200 mm Width: 820 mm Depth: 810 mm Top width: 965 mm Usable height: 1550 mm Construction: Stainless steel Mobility: Mobile unit on casters Power supply during use: Batteries, without permanent electrical connection Battery control: Control screen for battery charge level Manufacturer's warranty: 2 years

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used steel clamping table 4200 x 1500 x 350 mm Isdpfx Aajuzaafo Esaw Weight approx. 5000 kg

Condition: good (used), functionality: fully functional, The angle conveyor with steel hinges, 2 brake wheels and 2 swivel castors are for sale, the motor data can be found on the type plate. They are completely covered with a steel plate. A drawing with the dimensions is included in the advertisement and a video can be sent if required. The motor can be rotated faster or slower with the help of the FI. Well suited for the punching area Iaodpfer H Eckox Aa Esw Output height: 3100mm Useful width: 400 mm Total: 550mm Motor : 350mm Inlet: 300 mm x 410mm Belt speed const. 4m/min