Used Construction Site for sale (27,488)

Year of construction: 2011, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20972 Prjdowyabzjpfx Adnsd Description: 2011 wheel loader asphalt milling machine. Owner says it should work and is ready for use. Ready for delivery.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Psdpfjxq Rrcjx Adnerd

Condition: good (used), Year of construction: 1988, Low loader / semi-trailer Van Hool type H0007 year of manufacture 1988 Prodpfsxqw Tmox Adnod loading platform length approx. 8.20 m (flat deck) loading platform width approx. 2.5 m Height from ground to loading platform 63 cm

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front Prsdpoxmatnjfx Adnsd - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Year of construction: 2007, condition: ready for operation (used), A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible. Pedpsxpw Tdjfx Adnsrd

Condition: used, Serial number: xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21255 Specifications: Predpfow Ucl Dsx Adnod 2000 L Weight: 800 kg Steel Can be purchased individually Ready for delivery

Year of construction: 2022, operating hours: 72 h, condition: used, Serial number: AMOxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21151 Specifications: Prsdpfew R Nnqox Adnjd 2022 model Hours: 72 Weight: 2,950 kg Stage 5 engine Remote control Good tires Ready for delivery Hours: 72 Own weight: 2950 Model: F10

Condition: used, Please contact ATS Norway for more information Prsdpfx Adew Nvgkenod Please provide reference number upon request: 21085 Description:Various laboratory equipment supplied by HECO for stone quality control.Sold together with the container.The equipment was recently in use and is functioning properly.A complete equipment list is attached as an image.Quick delivery possible. Own weight: 3000 Model: Laboratorieutstyr til steinprøver

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19985 Pedjv U Shkjpfx Adnerd Description: 120 liter Kramer & Grebe chopper. New engine, axle, bearings and overhauled belts. 230 Volt cabinet included. Can be delivered at short notice.

Year of construction: 2010, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21293 Predpfxoxb N Dxs Adned Specifications: Approx. 2010 model S70 coupling Functions as it should 645 kg 172 bar Ready for delivery Own weight: 645 Model: HS11000

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Pjdpswrl T Tofx Adnord Works as it should Weight: 645 kg 172 Bar Ready for delivery

Year of construction: 2017, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21004 Specifications: Manufactured in 2017 Net weight: 114 kg Psdjwzrp Hspfx Adnsrd Max pressure: 9.6 bar Extra hose set and nozzle Feeder replaced Works as it should Ready for delivery Own weight: 114

Year of construction: 1994, condition: used, Serial number: 9xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20864 Specifications: - 1994 model - Rod changer - Hc150 hammer - 2500 kg - Km-mount - Vacum cleaner - Tilt cylinder - Grease nipple - Control panel w/ cable - Magazine - Ready for delivery Description: Predpfx Adjwvzirensd We have a 1994 model Montabert CPA500 drilling tower with HC 150 hammer for sale. According to the owner, everything works as it should. The tower is controlled via a panel with cable, which is permanently mounted on the machine. The hammer has run approx. 100 hours since the last overhaul. Extra support legs have also been welded on to raise the tower off the ground when using other equipment. Ready for delivery Own weight: 2500 Model: CPA500 boretårn m/ hc 150 hammer

Year of construction: 2003, operating hours: 3,323 h, condition: used, Serial number: AII66xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20507 Specifications: - 2003 model - 3323 hours - 7.25 bar - 22 kW - 450 kg - Uncertain condition - Ready for delivery Description: Psdpfx Aswphrmednsrd We have a 2003 Atlas copco GX22 compressor in uncertain condition for sale. The compressor has not been used for a few years, but worked the last time it was used. Therefore, it is sold as in unknown condition. So some additional costs can be expected. Ready for delivery Hours: 3323 Kw: 22

Year of construction: 2020, operating hours: 1,000 h, condition: used, Please contact ATS Norway for more information Pjdpfxjwvzkco Adnord Please provide reference number upon request: 20782 Specifications: Model year: 2020 Operating hours: Approx. 1000 Voltage: 400 V Frequency: 50 Hz Automatic feed screw Delivered with fully overhauled rotor Includes extra discharge screw Ready for delivery Description:Tiger Depack HS10 biopress, model year 2020.According to the owner, the machine has been used for a maximum of 1000 hours. The rotor has been recently overhauled, and an extra discharge screw is included. The machine is in full working condition and ready for immediate delivery. . Hours: 1000 Own weight: 4700 Model: Depack HS10

Year of construction: 2019, condition: used, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19694 Description: 2019 Vama EHK2200 wheel loader broom for sale. Everything works as it should, according to the owner. It's also good with brush left on it. There are 2 water tanks with nozzles to reduce dust when sweeping. Ready for delivery Predpfx Ajvyfa Dednjd

Year of construction: 2019, condition: used, Serial number: 180801xxxx Please contact ATS Norway for more information Please provide reference number upon request: 13218 Specifications: - 2019 model - 25 kW - Combi attachment, 40 and 50. - Ready for delivery Prodpfxjw Ia I No Adnjd - 1.20 m blade / digging depth Description: Digga chain digger sold for customer. Combination attachment with 40 and 50 attachment. Own weight: Kw: 25 Model: BFT2

Year of construction: 2014, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19994 Specifications: Prodpfx Ajv U Tmnedned - 2014 model - 47m3 - Total weight: 20 T - Container weight: 2272 kg - Ready for delivery Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Year of construction: 2015, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19995 Specifications: - 2015 model - 47m3 - Total weight: 20 T - Container weight: 2260 kg - Ready for delivery   Description: Prjdpov U Syasfx Adnsd Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Year of construction: 2002, condition: used, Serial number: 2020xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20126 Specifications: Model Year: 2002 230V 4 amp settings: 60, 100, 150, and 200 Cuts all types of steel Plate size: up to 2500x6000 mm Recently replaced drive motors Predpfewdvgzjx Adned Description:This is an Esab UXE-P 3500 with both plasma and gas burner on the same carriage. You can choose between 4 amp settings depending on the thickness of the steel to be cut: 60 amp, 100 amp, 150 amp, and 200 amp. It can cut all types of steel, including aluminum, stainless/acid-resistant, Hardox, and regular mild steel from 2 mm to 30 mm. With the gas burner, you can cut thicknesses up to 150 mm.Plasma and gas burner can also be operated simultaneously. The machine can handle plate sizes up to 2500x6000 mm.It has been regularly serviced, and the drive motors have recently been replaced.

Year of construction: 1986, condition: used, Serial number: ARP86xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20125 Specifications: Model year: 1986 Type: GA 355 Max pressure: 7.5 bar Power: 55 kW Ready for delivery. Own weight: 5750 Prsdpfx Adjwdvblsnsd Kw: 55 Model: GA 355

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21155 Prodpjw R Nn Dsfx Adnod Description: We have an Esab SB53 Generator Rep item for sale. The generator is being sold as a repair item as it is in unknown condition. Errors and omissions occur and some cost must be taken into account. Ready for delivery

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21271 Specifications: Extended feed bar, for 14 foot first rod, effective drilling length of 4.2 mp 1 rod. Hose reel construction for better hose handling Upgrading hydraulics for better capacity and energy efficiency Rod handling with 1 rod, drill length up to 7.5 meters New radio control New control system In-cab display for pressure adjustment and monitoring Directional instrument and meter counter HC25 hammer Rod shifter Ready for delivery   Predpfxjxatp Ae Adned Description: We have a Montabert micro drill rn significantly upgraded w/ hc25 hammer and rod changer for sale. The tower has been significantly upgraded to function as it should. The feed beam has been extended to accommodate a 14 foot 1-rod. Which effectively makes the drilling length 4.2 mp 1-rod. Rod changer for 1 rod (12 feet) increases drilling length to 7.5 m. Compressor hydraulic valve can be included for an additional price. The tower is ready for delivery. Own weight: 1 Model: micro borretårn betydelig oppgradert m/ hc25 hammer og stangskifter

Year of construction: 2011, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20207 Description: Prodpfxowdvk Ts Adnjd We have a 2011 Scandust 6000 sanding vacuum 400 volts for sale. Comes with hose and some used filters. The vacuum cleaner has been used very little, but needs a cleaning according to the owner. Used for sanding concrete surfaces. Ready to ship

Year of construction: 2016, condition: used, Serial number: 2xxxx Podevg N Hhopfx Adnjrd Please contact ATS Norway for more information Please provide reference number upon request: 13667 Specifications: - Holm's SL-2.5 - 2016 model - Board (see pictures) - Own weight: 375 kg - Ready for delivery