Used Conical Round Moulder for sale (4,817)

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. Credpfx Aey Auunokceb WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! Cjdpfx Asy Autqjkcerb 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Crsdpfewgbxzex Akcob A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 36 m/min, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, total width: 2,400 mm, total height: 1,800 mm, power of feed motor: 5,000 W, jointer table length: 1,200 mm, table length: 1,200 mm, number of spindles: 7, 7-spindle moulder with 6 PowerLock spindles. All spindles are electronically controlled (except for the planer head). CNC PowerCom control. Working width: 20-230 mm, Working height: 8-160 mm, Feed speed: 6-36 m/min, 5 kW, with electronic variable speed drive. 1.2 m infeed table. Automatic lubrication pump (Waxilit). 8 pneumatic pressure shoes and 3 rollers on the table. Csdpfsy At Efsx Akcorb Configuration: Bottom horizontal spindle 5.5 kW Right vertical spindle 7.5 kW with PowerLock Left vertical spindle 7.5 kW with PowerLock Right vertical spindle 7.5 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Bottom horizontal spindle 11 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Fully reconditioned four-sided moulder.

Condition: used, Year of construction: 2001, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Empty weight: 950 kg Price: On request Table milling machine Codpswl I E Eofx Akcerb Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total length: 2,960 mm, total width: 1,330 mm, total height: 1,850 mm, - Year: 1998 - Documentation available: No Cedpfx Aksyvr S Dscorb - CE certificate present: No - Serial number: V255154 - Spindle diameter [mm]: 30 - Table length [mm]: 2400 - Table width [mm]: 800 - Guide present: No - Spindle speed: Automatic - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 9000 - Spindle speed control: Incremental - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 2960mm x 1330mm x 1850mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Empty weight: 900 kg Crodownigcopfx Akcob - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her - Number of wheels [pcs]: 3 - Number of speeds: 2 - Voltage [V]: 380 - Current consumption [A]: 12 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1986, used, good condition, low hours Brand: Weinig Model: P22N Year of manufacture: 1986 Machine no.: 226-670 Number of spindles: 4 Spindle arrangement: bottom - right - left - top Motor power kW: 4.0 - 7.5 4.0 Motor brakes Planing width approx. mm: 220 Planing height approx. mm: 120 Spindle diameter mm: 40 Table length approx. mm: 2,000 Csdpfxsy Apfzs Akcorb Pre-cutter Cardan feed Lateral pressure rollers Protective hood Infeed before the jointer Infinitely variable feed speed 4 - 20 m/min Profiling Sliding rollers: 1 piece Electric adjustment: thicknessing shaft Digital displays: width-height Extraction connection mm: 120/120/120/140 Space requirement approx. 3600 x 1400 x 1400 mm Weight approx. 1,500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition, as inspected, without any warranty or guarantee

Condition: new, Cabinet with 7 drawers; flat, round, and bushing ejectors, approx. 1,000 pieces. Cjdsxz Ry Uepfx Akcjrb Price per piece: €10

Condition: used, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Table tops with guide blades at spindles 2 and 3. Includes Weinig/Neumann RF 15 return conveyor system Credpfx Akeyy A Iqjcjb Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) with depth...

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: Crsdpfox Svm Rsx Akcsb 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: good (used), functionality: fully functional, 1 x Bertuetti 4 x roller dough moulder for pieces up to 1500g. Model - SIMPLEX. Crodpfx Aey Aic Tskceb

Condition: excellent (used), length ca. 3.200 mm width ca. 1.400 mm height ca, 1.600 mm Motors 2 table - swivable Ja The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes Credpfx Aksxwbpfecob

Condition: used, Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. uper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Crjdpsyyqnlsfx Akceb Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Spindle configuration 1st spindle: Planing spindle – 4 kW 2nd spindle: Right vertical spindle – 5.5 kW 3rd spindle: Left vertical spindle – 5.5 kW 4th spindle: Top horizontal spindle – 4 kW Csdpsyym Nrjfx Akcsrb 5th spindle: Bottom horizontal spindle – 4 kW 6th spindle: Universal spindle – 4 kW Spindle speed: 6,000 rpm Spindle diameter: 40 mm Working area Working width: 25–230 mm Working height: 10–120 mm Min. workpiece length: 450 / 630 mm (depending on version) Feed Infinitely variable: 5–25 m/min Feed rollers Ø 140 mm Infeed table 2,000 mm Tooling ranges Vertical spindles: 100–180 mm Horizontal spindles: up to 180 mm Max. profiling depth, vertical: 40 mm Features Manual table and central lubrication Robust industrial design, smooth operation and high precision

Condition: reconditioned (used), LEADERMAC THUNDERMAC 923T SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (22 KW) - RIGHT (15 KW) - LEFT (15 KW) - RIGHT (15 KW) - LEFT (15 KW) - TOP (22 KW) - BOTTOM (22 KW), Credpfx Aoy Ahi Sskcjb TOP (22 KW) - BOTTOM (22 KW). WORKING WIDTH: 230 (245) MM, HEIGHT: 160 MM. MAX FEED SPEED 80M/MIN (POSSIBLE TO INCREASE TO 150M/MIN) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data Capacity: approx. 12,000 bottles/hour Formats: up to 3 L PET bottles Application: PET bottle production Configuration: Rotary stretch blow moulding machine, 6 cavities Neck finish: PCO 1881 Scope of Delivery Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds Preform feeding system  Chiller unit  Air conveyor system  Control system | Integrated HMI Credpsyybkdjfx Akcob

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Spindle Power: Bottom spindle: 4 kW Right spindle: 7.5 kW Left spindle: 7.5 kW Top spindle: 7.5 kW Bottom spindle: 4 kW Universal spindle: 4 kW Codpfeyybdwox Akcjrb Planing width: 220 mm Planing height: 120 mm Max. spindle speed: 6,000 rpm Spindle diameter: 40 mm Feed rate max.: 22 m/min (infinitely variable) Feed motor: 3 kW Main motor: 7.5 kW Pneumatic top pressure Feed via cardan drive Motorized adjustment (planing width and height) Infeed table length: 2,000 mm Integrated lubricant pump

Condition: new, ZEATZ NC Rotary Tables PHV Series – Available for Immediate Delivery The ZEATZ NC rotary tables in the PHV series stand for maximum precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your benefits at a glance: Cedpfx Akom Tvz Djcsrb ✔ Integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service & technical support directly from JMT ✔ Custom configurations and tailored solutions ✔ High load capacity for heavy workpieces Why ZEATZ: ZEATZ represents innovative NC rotary table solutions with top precision and reliability. With robust construction, backlash-free drive systems, and state-of-the-art control technology, these rotary tables are perfect for demanding machining tasks. Technical specifications: Working position: Vertical / Horizontal Applications: Positioning – Stepless rotation – Interpolated machining Sizes: Table diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional: square clamping surfaces available) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3" Integration: Compatible with HEIDENHAIN and SIEMENS controls Your advantages as a JMT customer: ✔ Official distributor for ZEATZ in Germany ✔ On-site technical support and service ✔ Fast spare parts service ✔ Assistance with integration and commissioning ✔ Reference projects available in Germany Contact us – we are happy to advise you and provide a customized quotation

Condition: new, ZEATZ PHL Linear Rotary Tables – Short Delivery Times for Turning and Sliding Tables The ZEATZ PHL Linear Series combines high-precision rotary table technology with an integrated linear axis, offering maximum flexibility for complex machining tasks. Ideal for positioning, simultaneous turning, and interpolation machining of large and heavy workpieces. Your Benefits at a Glance: ✔ Combination of rotary table and linear axis in a single unit ✔ Seamless integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service and technical support directly through JMT ✔ Custom configurations and customer-specific solutions Why ZEATZ: Crodpsm Tv Azjfx Akcjb ZEATZ stands for high-precision NC rotary tables and innovative solutions for demanding machining applications. With a robust design, backlash-free drive systems, and state-of-the-art control technology, these systems are the perfect fit for heavy-duty cutting operations and the highest precision requirements. Technical Specifications: Applications: • Positioning • Simultaneous turning • Interpolation machining Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (Round clamping surfaces also available) Max. workpiece weight: approx. 6,000 to 80,000 kg Linear axis: Optional integrated sliding axis Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 arc seconds Integration: Compatible with HEIDENHAIN and SIEMENS controls Your Advantages as a JMT Customer: ✔ Official sales partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Rapid spare parts supply ✔ Assistance with integration and commissioning ✔ Reference projects available in Germany Contact us – we will be happy to advise you and provide you with a custom quotation.

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Credsvwfiajpfx Akcsb

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Cjdpfx Ajid Al Njkcerb Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: used, second hand Make Comag Spindle diameter 30 mm Table size 900 mm x 900 mm Extraction connection D 120 mm Space requirement approx. 900 mm x 1100 mm x 1000 mm Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without guarantee and warranty Crodpfxjyz Dd Ne Akcsb

Condition: excellent (used), Year of construction: 2013, I sell the fourside moulder Weinig POWERMAT 600, year 2013 Working width 230mm Working height 130mm Codpfxeyznrko Akcorb 6 spindles configuration: Bottom Right Left Top Top - 8000rpm Bottom 3-zone pneumatical pressure Good condition Fully working! Available immediately Including full documentation and CE certyficate.

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 106196, planing height: 200 mm, spindle diameter: 90 mm, planing width: 300 mm, spindle speed (max.): 8,000 rpm, height adjustment type: electric, compressed air connection: 8 bar, number of spindles: 5, For sale is a planing line by Weinig, complete with associated mechanisation from Kallfass (before and after the planer). The planing line is currently no longer in daily production. The operator side (left) first spindle and its mounting are defective. Weinig Moulder: Weinig Powermat 2000XL (year 2006) with 5 spindles (Weinig Powerlock system) plus chamfering unit. "Set-up time savings!" Spindle arrangement: bottom, right, left, top, bottom. The bottom and top spindles are both equipped with a jointing device. Spindle motor ratings: bottom 23.5 kW / right 15 kW / left 15 kW / top 28.5 kW / bottom 28.5 kW. Spindle speed: 8,000 rpm. The feed has a 15 kW drive motor, providing feeding speeds from 6 to 60 m/min. Compressed air requirement: nominal pressure 8 bar, operating pressure 6 bar. Crodpfxjyzibmj Akcob Workpiece dimensions for processing in the planing line: Shortest part: 2.00 m Longest part: 11.00 m (depending on mechanisation) Minimum thickness: 19 mm Maximum thickness: 200 mm Minimum width: 40 mm Maximum width: 300 mm Maximum profiling depth: 35 mm Feed rate: 6–60 m/min. Splitting is possible on the fifth lower spindle up to 60 mm height. Mechanisation: Kallfass "HmoK10000" year 2006 (operational/used) Before and after the planing line there is mechanisation by Kallfass. There is the option to buffer 2–3 packs before the unit, which must then be manually destacked before the infeed. Layer formation after the planer is performed by a paternoster unit with 3 adjustable walls. The maximum component length for this setup is 11.00 m. Price is quoted net ex works, without warranty. Complete disassembly is to be carried out by the buyer. A large inventory of cutterheads, spare parts, and various extraction components is available and can be purchased separately.