Used Computer Cabinet for sale (6,715)

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Bwjdpfjz Ha Hlsx Amrju Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 125,000 km, power: 110 kW (149.56 HP), first registration: 04/2020, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW T6.1 L2 long wheelbase, 4Motion / all-wheel drive with differential lock, with a gross vehicle weight of 3.2 tons. From first owner and with optimal equipment, ideal for trades and businesses, e.g. as a service vehicle / workshop vehicle. Workshop fit-out from ALUCA (see below). All-wheel drive (4Motion, 4M, 4x4, 4WD) with mechanical rear differential lock. Underbody protection (engine and transmission) made of aluminum. Trailer hitch, 2.5-ton towing capacity, removable. Mounting rails for roof rack. Auxiliary heater, programmable and with remote control. Climatic air conditioning with pollen filter. Driver assistance systems: - Park Distance Control (PDC) front and rear, optical and acoustic display. - Rear view camera. - Cruise control with speed limiter. - Trailer stabilization. - Side wind assist. - Brake assist (HBA). - Driver fatigue detection. - Tire pressure monitoring system. - ABS, ASR, ESP. Light and Visibility Package: - Automatic headlights. - Automatic windshield wipers. - Automatically dimming interior mirror. Audio-navigation system Discover Media (touchscreen color display): - Navigation with TMC. - Radio (FM). - USB, Bluetooth audio, web radio, BT streaming. - Hands-free system for mobile phone with Bluetooth. - App Connect (Apple CarPlay, Android Auto, Mirror Link). - Mobile Online Services Car-Net. - Voice control for radio, media, telephone, navigation. Multi-function display Plus / on-board computer. Electrical Package 1: - Electric windows. - Electrically adjustable and heated exterior mirrors. Central locking with remote control. 2nd battery with separator relay. Heated windshield washer nozzles. Spare wheel in driving condition and jack. Additional equipment: Airbag package: - Front airbags. - Side airbags in the seats. - Head airbags in the B-pillar. Sliding door to the cargo area on the right with tinted window. Rear door with tinted window, heated, windshield wiper. Wheelbase 3400 mm. Truck registration - N1. 6-speed manual transmission. Adjustable steering wheel. Bedpozw Nz Ajfx Amrewu Comfort driver and passenger seat with armrests on both sides, foldable, adjustable: - Seat height, backrest, lumbar support. Seat cover fabric. Non-smoker package. Heat-insulating glazing. Cargo area equipment: ALUCA workshop fit-out (similar to Bott, Sortimo, Würth). Shelving with storage compartments on both sides, shelf compartments, 10 drawers, cabinet compartment and 4 tool / small parts cases (ALU). Fold-out vise. Cargo area partition with window, upholstered in the driver's cab (noise-insulated). Robust, plastic-coated wooden floor. Headliner. Load securing through eyelets and mounting rails. Bright LED lighting. Cargo area dimensions: - Length at the bottom: approx. 282 cm - Length in the middle: approx. 270 cm - Length at the top: approx. 258 cm - Height: approx. 134 cm Mounted tires: Winter tires 215/65 R 16 on steel rims with approx. 9/9/9/9 mm tread depth. Additional tires: Summer tires 205/65 R 16 on steel rims with approx. 3 / 3 / 3 / 3 mm. Maintenance history from VW: 02.2021 / 26,283 km Inspection with oil change. 02.2022 / 54,685 km Inspection with oil change. 03.2023 / 79,989 km Inspection + brake fluid + oil change. All-wheel drive coupling (Haldex). 07.2023 / 85,852 km Oil change. 07.2023 / 85,852 km Action 5711 Critical 01. 03.2024 / 94,392 km Inspection. 04.2025 / 109,843 km Inspection with oil change + brake fluid + interior air filter. 03.2026 / 126,180 km Inspection with oil change + interior air

Condition: excellent (used), Catalog number 6765 Bedpfx Aoztzmcomrewu TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable right/left from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm from above: - infeed rollers, toothed, pulling, 6 pcs, including 2 double rollers - outfeed rollers, pulling, rubber, 2 pcs from below: - infeed roller, toothed, pulling, metal, twisted in the lower table + - outfeed roller, pulling, metal, smooth - rollers adjustable pneumatically - length of infeed table (with pneumatic feeder) 3390mm - possibility of operation without activating the pneumatic feeder, - table adjustable up/down - central lubrication - electric adjustment of planing thickness - stepless adjustment of feed rate - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions (L/W/H) 7000x1950x1700mm, - weight approximately 3000kg – for wet and dry wood – pneumatic feeder on the infeed table, – used planer, very good condition Net price: 65900 PLN Net price: 15326 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 Bwodpfx Amoz E U D Njrju - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Bwjdoz Hb Scepfx Amrju Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, mileage: 90,000 km, power: 88 kW (119.65 HP), first registration: 05/2016, fuel type: diesel, overall weight: 2,700 kg, next inspection (TÜV): 05/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system: Radio CD 18 BT (Radio/CD, USB port, Bluetooth), spare wheel with road tyres, seat configuration: bench seat omitted Additional equipment: Bwsdpez Hawqjfx Amrsu Driver's airbag, exterior mirrors electrically adjustable and heated, on-board computer, brake assist, tachometer, electronic differential lock, rear wing doors without windows (opening angle 180 degrees), body/construction: standard panel van, cab: standard cab, body length: L1, roof height: standard roof (H1), fuel tank: 80 litres, adjustable steering column (steering wheel), engine: 1.6 litre - 88 kW biturbo CDTI, radio remote control on steering wheel, wheelbase: 3,098 mm, low-emission according to Euro 5 emissions standard, steel wheels 6.5x16, start/stop system, variable load securing rails (FlexFix system), heat-insulating glazing, permissible total weight 2.7 t Vehicle shows signs of wear visually, technically in very good condition! Financing available

Year of construction: 2021, condition: good (used), functionality: fully functional, Moisture Analysis Device Computrac® Vapor Pro® XL Autosampler Bjdpfx Amjzx S Etsrswu From the dismantling of a battery cell manufacturing facility Automated, chemical-free moisture analysis The Vapor Pro XL (VPXL) Autosampler is an advanced version of the Vapor XL, featuring the latest moisture-specific analysis technology. The VPXL Autosampler offers an automation function for up to 16 samples with individual test profiles. Measuring range (moisture): 10 ppm (10 µg | 0.001%) - 100% Number of samples: Up to 16 Moisture resolution: 1 ppm (0.1 µg | 0.0001%) Weight: 18.6 kg Dimensions: 737 L x 394 W x 208 H mm Results: % moisture, ppm moisture, µg water Data storage: Includes up to 250 test programs, stores the last 1000 test results, and the last 100 test graphs.

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted Bjdpfxez Hckmo Amrowu - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: excellent (used), For sale: Complete industrial pneumatic press in a workshop housing, ideal for punching, pressing, stamping, or other assembly processes. The set includes: • Pneumatic column press with a robust steel frame • Control valve, cylinder, and pneumatic distribution • Integrated control panel with emergency stop switch • Steel worktable with adjustable side guides Bsdsud Rddspfx Amrewu • Power cabinet, distribution board, and cable management • Mobile table with transport brake Drive: Pneumatic supply Control: Solenoid valves, start/stop buttons Power supply: 230 V (electric system integrated in the base) Technical condition: Very good. Used, fully functional set ready for immediate use in a production facility. Genuine industrial construction, not for amateur use.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Bwodpfxsz Hb S Aj Amrsu Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth 24x Pallets Quenching Line Tooling

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. Travel distance X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows 10 control with new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit Bodpjwwukxjfx Amrswu minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light curtain areas, enabling pendulum operation A total of 8 material clamps Spindle in very good condition, spindle-in-draw force: 12.5 kN Protective fence removed, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,110 mm, travel distance Z-axis: 1,800 mm, number of axes: 3, This 3-axis MASSIVIT 1800 PRO was manufactured in 2019. It features a maximum printing volume of 1,450 × 1,110 × 1,800 mm and a maximum linear printing speed of 300 mm/s. The machine is available with either one or two printing heads, with the two-head configuration available at an additional cost. If you are looking to get high-quality large-scale 3D printing capabilities, consider the MASSIVIT 1800 PRO plastic 3D printer we have for sale. Contact us for further details. • Printing technology: Gel Dispensing Printing (GDP) • Printing heads: Two machines available: one equipped with 1 printing head and the other with 2 printing heads. The machine with 2 printing heads is available at an additional cost. • Max build volume (X/Y/Z): 1,450 × 1,110 × 1,800 mm • Max linear printing speed: 300 mm/s • Z-axis printing speed: up to 350 mm/hour (specified for a 1 m diameter cylinder) Bwedpfx Aez Hdflemrou • Layer thickness / resolution: 1.3 mm (Normal), 1.0 mm (Quality), 0.8 mm (High Resolution) • Special printing modes: Mega-Quality, Variable Resolution, Mold Mode • Supported materials: Dimengel 90 (all-purpose), Dimengel 100 (translucent), Dimengel 300 (transparent) • Material system: Single-material • Software: Integrated software incl. Massivit SMART Pro Slicer and Estimator Tool; advanced slicing algorithms; Mold Mode; Variable Resolution; Mega-Quality • Monitoring & automation: Automatic time-based cleaning; camera on printing head tip; remote monitoring; remote operation/support via computers, tablets, and phones • Current machine status: Two units available; being replaced by new machines. Replacement container ETA 29 Oct 2026; installations expected early November. Both units purged/drained and currently not in operation.

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device Bwodpfx Amjz Hgb Asrou - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins

Condition: used, mileage: 32 km, power: 90 kW (122.37 HP), first registration: 08/2026, fuel type: diesel, overall weight: 2,450 kg, color: red, gearing type: automatic, number of seats: 5, total length: 4,868 mm, total width: 1,855 mm, total height: 1,842 mm, loading space length: 1,201 mm, loading space width: 1,225 mm, loading space height: 1,175 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Number: 4704.NW26.TX022953 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Tow hitch, detachable - incl. ESP trailer stabilization and continuous power supply * Driver Assistance Package 5 Plus: Partially automated driving Level 2 - IACC with Stop&Go - Power Start - Blind Spot Assist with Cross Traffic Alert - Exit Warning System - Pre-Collision Assist, pedestrian and cyclist detection - Traffic Sign Recognition System - Driver Drowsiness Warning - Lane Keeping Assist incl. Lane Departure Warning - Park Pilot System front and rear - Rear view camera - Hill Start Assist - 10-inch touchscreen, DAB/DAB+, navigation - 10.25-inch digital instrument cluster - FordPass Connect incl. eCall emergency assistance - Android Auto, Apple CarPlay - 2 USB-C ports - Voice control * Seat Package 53: Driver and passenger seats individually and variably heated - Heated steering wheel - Driver seat, 4-way manually adjustable - Passenger seat, 2-way manually adjustable - Lumbar support for driver, 2-way adjustable - Airbag package, consisting of head and shoulder airbags, as well as side airbags for driver and passenger * Auxiliary heater, fuel-powered, programmable via on-board computer FURTHER EQUIPMENT * Airbag driver and passenger side * Airbag: Passenger airbag deactivation function * Alcohol interlock (preparation) * ABS - with ESP, hill start assist and traction control * Exterior mirrors electrically foldable, adjustable and heated * Floor covering, rubberized, front * On-board computer Bwsdpfxjzc Tthe Amrju * Crossover body kit Active - grille with honeycomb design - wheel arch trim, black - front and rear bumpers in Active design, front with underride protection * Roof storage compartment, front * Roof rails, silver * Anti-theft/alarm system with interior monitoring * Diesel particulate filter (DPF) with SCR catalyst and AdBlue tank * Double-wing tailgate with 180° opening angle (without window) * Window: side window, 2nd row, fixed, right * Remote control: 2nd remote key for central locking - instead of conventional key * Windshield, heated * Glove box with lid, illuminated * Interior lighting, front with delay switch and two reading lamps * Interior lighting, rear * Isofix bracket on the outer seats of the 2nd row * Air conditioning with automatic temperature control (2-zone) * LED tail lights * LED headlights - headlights, automatically height-adjustable - high beam assist * Charging station, inductive * Steering column, adjustable in height and reach * Fog lights with static cornering light * Upholstery: fabric * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 with 215/55 R 17 tires - 5-spoke design, in premium paint finish - wheel hub covers * Windshield wipers with rain sensor * Sliding door, right and left * Side wall paneling, half height * Power steering, electro-mechanical EPAS * Seat belts front and rear - Three-point seat belt on all rear seats * Sun visor, driver and passenger - with mirror and ticket holder, not illuminated * Start-stop system * Dust and pollen filter - without activated carbon filter * Socket: 12-volt socket - 1x front and 1x in the cargo area * Front bumper in body color - with underride protection * Daytime running lights * Flexible bulkhead with window * Child safety lock on sliding doors * Door inner paneling, front - with illuminated switches incl. door compartments for 1.5 L bottles * Immobilizer, electronic * Heat-insulating glass, tinted

Condition: used, mileage: 84,939 km, power: 121 kW (164.51 HP), first registration: 08/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,300 mm, total width: 2,180 mm, total height: 2,300 mm, loading space length: 2,912 mm, loading space width: 2,106 mm, loading space height: 400 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1355. 2V28657 ----EQUIPMENT * Fixed trailer coupling * Exterior mirrors for a width of 2.20 m, electrically foldable * Air conditioning * Platform body, loading dimensions 2912x2106x400mm * Radio with BT and DAB+ - steering wheel remote control - USB port - four speakers * Seats: 3 seats with fabric upholstery (Selection) - driver's seat with 6-way manual adjustment (length and backrest angle) with lumbar support - double passenger seat with foldable seat back and rotating table - headrests, height-adjustable, front - three-point safety belts on all seats (belt force limiter in the front, double belt pretensioners in the front, warning sound and light for unfastened belts in the front) * Anti-lock braking system (ABS) with cornering brake control and brake assist * Storage compartments - storage compartment in the front doors - beverage compartment in the dashboard on the right (cooled with air conditioning) - glove compartment, not illuminated * Storage: cup holder with clipboard * Airbag, driver side * Exterior mirrors, electrically adjustable and heated * Exterior mirror housings in black * Battery discharge protection * Hill start assist * On-board computer * Brake light, adaptive * Tachometer * Three-point safety belts on all seats - belt force limiter, front - double belt pretensioners, front - warning sound and light for unfastened belts, front * ESP, electronic stability program Bsdoz Hg Rkjpfx Amrswu * Omission: interior rearview mirror * Power windows, front * Speed limiter and cruise control * Transmission: 6-speed manual * Fuel tank 90 liters * Paintwork: solid color * Steering wheel: comfort steering wheel * Heating and ventilation system with particle and odor filter, front * Particle filter: diesel particulate filter * Side impact protection * Power steering, speed-dependent * Steering column: safety steering column, longitudinally adjustable * Seats: 4 seats in the 2nd row including 4 headrests * Sun visors, driver and passenger * Start/Stop system * Daytime running lights * Traction control with engine and brake intervention (TC Plus) * Conversion socket - 15-pin connector - located at the base of the right B-pillar * Immobilizer * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any questions? We will be happy to advise you!

Year of construction: 2019, condition: used, Technical data: - Manufacturer: Cefla - Type: TR - Year of manufacture: 2019 - Equipped with its own control cabinet - Feed rate setting: approx. 2.2 - 20 m/min. Bodpfx Aeyifv Semrswu - Emergency stop - Display for Hz frequency inverter - Transport length: 1,500 mm - Working width: 1,300 mm - Working height: 900 ± 20 mm - Installed power: 0.8 kW - EX ATEX design - Location: in the warehouse

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,660 kg, load capacity: 360 kg, arm reach: 2,826 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant model: KRCP4, The machine has been completely overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload capacity: 360 kg Arm reach: 2,826 mm Positional repeatability (ISO 9283): ±0.08 mm Bwodpfx Ameydbx Ierju Number of axes: 6 Maximum additional load Rotating column: 550 kg Link arm: 130 kg Arm: 150 kg Range of motion A1: ±185° A2: –130° / +5° A3: –110° / +162° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load) A1: 103°/s A2: 94°/s A3: 100°/s A4: 117°/s A5: 110°/s A6: 163°/s MACHINE DETAILS Controller model: KRC4 Dimensions & Weight Footprint: 968 × 944 mm Robot weight: approx. 1,660 kg Model: KRC4 KR360 Condition: Used Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Year of construction: 2015, condition: good (used), For Sale: Nawi Stainless Steel Bin Washing Machine Make: Nawi Year of Manufacture: 2015 Specifications: - Completely stainless steel Bwjdpsyiyxkofx Amrsu - Steam heated - Equipped with infeed conveyor belt, width 1100 mm - Tilting device with infeed guide - Discharge screening system - Central control cabinet with touchscreen operation - Wash chamber dimensions: 2500x1700x1300 mm - Infeed + outfeed If you have any questions or comments, please feel free to contact us. Price includes disassembly Loading is included. Transport by arrangement Inspection possible on site. Kind regards, Leo Holland

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! Bjdjz A Ubijpfx Amrswu TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Leitz Reference HP 5.4.3 was manufactured in 2020. It features a measuring range of 500 × 400 × 300 mm and includes a granite table, Hexagon LSP-X3 probe system, and a Leitz controller. If you are looking to get high-quality coordinate measuring capabilities, consider the Leitz Reference HP 5.4.3 CMM machine we have for sale. Contact us for further details. • Viewing: Possible by appointment; machine can be seen running • Incoterm/Collection: EXW Technical specifications • Accuracy (MPE-E): 0.70 + L/400 µm • Probing error (MPE-P): 0.80 µm • Table: Granite table • Probe system: Hexagon LSP-X3 • Stylus clamping: HP-S-X3 • Stylus changer: Hexagon 5-port stylus change rack • Change ports: HR-X3-P • Controller: Leitz controller in free-standing cabinet • Operator control: Leitz twin-joystick panel with emergency stop Machine history / service • Aug 2020: Machine and accessories supplied new by Hexagon Metrology • Sep 2020: Software bundle supplied by Hexagon • Feb 2021: 6 additional M2 stepped styli purchased • Apr 2021: Installed and commissioned in Andover by a Hexagon engineer (Installation/service report ref. 15320) • Last calibration: 16 May 2023 by Hexagon Metrology • Standard: ISO 10360-2:2001 • Certificate: CAA/REF769/543/16052023 • Result: Calibration met customer specification • Certificate available on request • Calibration validity: until 24 May 2024 Additional equipment Bjdpfx Amjz H Tmrjrewu • QUINDOS version 2023 • I++ Simulator + QUINDOS bundle • Additional CMM model • Licence manager for add-on bundle • Software licence transfer: subject to confirmation by Hexagon Peripherals and fixturing • HP workstation PC with 2 monitors • Kinematic fixturing: • Swift-Fix universal kinematic base (1) • Swift-Fix kinematic plates 300 × 300 × 16 mm (2) • Ceramic reference sphere Ø30 mm (1) Styli, holders, adapters, and change hardware • HR-X3-P changer ports (5) • Stylus kit • Special stylus holders (3) • 8 × M5 + 8 × Ø2 mm stylus holder (1) • M5/M2 stylus adapter (1) • M2 5-way stylus holder (1) • M2 stepped styli: 4 + 6 • M2 stylus R1 (1) • Special Ø0.3 mm ruby styli (8) • Special Ø1 mm ruby/carbide stylus (1) • Ø1.5 mm Si3N4 stylus (1) • Ø3 × 35 mm ruby stylus (1) • Ø3 × 50 mm ruby stylus (1) • Ø5 × 60 mm ruby stylus (1) • Titanium extension (1) • Rotary joint (1) • Adjustable cubes (2) • M5 cube (1)

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00705, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Bjdpjz H Uymjfx Amrswu Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: refurbished (used), machine/vehicle number: R-00713, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 4600-60/2.05 manufactured in {year_of_manufacture_robot}. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 4600-60/2.05 Model Number: IRB Year of Manufacture Robot: {year_of_manufacture_robot} Warranty term (months): 12   Bjdpfxsz H I H Te Amrowu Payload (kg): 60 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2015.08 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: reconditioned (used), Awl grinding machine Manufacturer: harich (Deckel) Model: SSMplus (S0E) Bwjdpfx Aoz Hy E Ijmrju Refurbished, with CE marking Includes warranty Equipment: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - New machine electrical system in accordance with current safety regulations - Documentation for the machine and control cabinet in printed form, consisting of: - Operating manual - Wiring diagram - CE declaration of conformity Additionally equipped with safety measures in accordance with standard EN 60204-1, consisting of: - Control cabinet with main switch, power supply, contactors, motor protection, safety switching devices - Emergency stop mushroom button instead of the main switch on the machine - Green button for turning the machine on (illuminated) - Red button for turning the machine off - LED status indicator in the form of the harich logo: - Blue for machine on - Green for grinding spindle on

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00702, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA manufactured in 2012.01. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2012.01 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Bwjdjz H Np Nopfx Amrsu Year of Manufacture Cabinet: 2012.01 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00704, load capacity: 400 kg, arm reach: 3,704 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/400L manufactured in 2016.11. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/400L Model Number: A05B-1332-B203 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Payload (kg): 400 Reach (mm): 3704 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 3150   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7 Bjdpsz Hvxwsfx Amrewu   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10