Used Compressor With Air Dryer for sale (28,798)

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Lsdpfx Aiew Dppveijrn Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Cooling water connection: 2" Refrigerant: R407C Refrigerant charge: 24 kg Installed electrical power: 29 kW Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Height: 3650 mm Weight: 5600 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Lrsdpfer A El Eex Aiien Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: ready for operation (used), Year of construction: 1995, Used compressed air refrigeration dryer. Before being decommissioned, the refrigeration dryer was checked for functionality by a refrigeration technician. Subsequently, 18 kg of R22 refrigerant (2 bottles) were extracted and disposed of. All records are available. Afterward, a small amount of nitrogen was added. Lrsdpfxefy Trho Aiisn We can gladly have the dryer refilled with new refrigerant (e.g., R407C) for you. !! The selling price does not include refrigerant !! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A Max. flow rate: 55 m³/min (3340 m³/h) Pressure drop at max. flow rate: 0.38 bar Refrigerant weight: 18 kg (currently without refrigerant) Max. pressure, refrigerant side: 16/25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch Max. pressure, compressed air side: 16 bar Max. flow rate Max. temperature: Compressed air: 60°C Power consumption with fans: 7.1 kW Voltage: 400 volts Dimensions (width/depth/height): 1880 mm / 1100 mm / 2000 mm Weight: 835 kg

Condition: good (used), We offer you a BEKO Öwamat 4 here. Feel free to contact us for a quote. Lrodpfx Aisxtu Nksijn

Condition: good (used), Year of construction: 2004, ALUP screw compressor TYPE SCK 31-10/SON 3.12 volume flow 10 bar final pressure 22.0 KW with refrigeration dryer and boiler Lredpfxjwmwpie Aiisn

Condition: excellent (used), Year of construction: 2010, INGERSOLL RAND desiccant dryer Capacity: 13 m3/min, Year of manufacture: 2010, Ljdoiuk D Depfx Aiiern Dryer is in fully working condition.

Year of construction: 2026, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Ljdpfx Aijq Nfbheisrn Here are key features and information about cement clinker grinding mills: 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, Year of construction: 2002, Air compressor (oil-free) CompAir R 180 Model R 180 TS-Z11 Year of construction: 2002 Weight: 3860 kg Volume flow: 17.0 m³ / min Intake pressure: 1 bar Stage pressures: 2.4 / 12 bar Lrsdpfxou Rphqs Aiisn Installed motor power: 110 kW The compressor was regularly serviced and inspected until it was decommissioned.

Condition: used, Year of construction: 2000, overall weight: 3,860 kg, CompAir screw compressor Model: Champion 180 Ljdou Rn Ngepfx Aiiorn Year of manufacture: 2000 Intake pressure: 1 bar Stage pressures: 2.2 / 12 bar Volume flow: 17 m³/min Engine power: 110 kW The compressor is in working order and was regularly serviced and inspected until it was decommissioned.

Condition: used, Year of construction: 2013, Compressed air refrigeration dryer Model: MG 110 Year of construction: 2013 Air volume flow 6,600 m³/h or 110.0 m³/min Nominal power: 8.99 kW Lredpsu Rn Trjfx Aiion The air dryer is functional and was regularly serviced and checked until it was decommissioned

Condition: used, Year of construction: 2008, Air consumption 42,83 m³/min Lodjvx Uvljpfx Aiijrn Motor output 250 kW Overall size 4000 x 2100 x 2500 mm 0 min. 4 bar 0 max. 13,5 bar Weight 20.000 kg Dimensions (LxWxH) 13,00 x 2,95 x 2,90 m The pneumatic container is used to provide oil-free dry Compressed air (42 m³/min max. 7.5 bar) for test facilities and consists of a self-contained container functional unit, in which the following Machines, as shown schematically in Figure 2, were integrated: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - Activated carbon adsorber BEKO Clearpoint L 3400 V - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 - El. Steam trap BEKO 14

Condition: excellent (used), Year of construction: 2017, s016677 CREEMERS TYPE: RCA7.5 S/N: ITJ099846 YEAR: 2017 POWER (kW): 7.5 OUTPUT (m3/min): 1 PRESSURE (bar): 10 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTS: no CONNECTION: 3/4 NEW/USED: USED s016691 MAKE: CREEMERS TYPE: EDD1200 S/N: ITJ059524 YEAR: 2017 POWER (kW): 0.475 OUTPUT (m3/min): 2 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: no BUILT-IN DRYER: R134a 0.35kg HEAT EXCHANGER: no COOLING (AIR/WATER): no Ljdpfxey Ddfrs Aiijrn ON TANK: DOCUMENTS: no CONNECTION: NEW/USED: USED owomat

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 30.60 m³/min Year of manufacture: 2016 Lrodpfjx Sx U Dsx Aiion

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units Lrjdpjy Amr Eofx Aiion - And much more...

Condition: new, functionality: fully functional, fuel type: diesel, Year of construction: 2025, Equipment: new trailer mounted 190cfm diesel engine rotary twin screw air compressor Make/model: MCWEL MC190S-I Free Ris Delivery : 190cfm Working Pressure :100psi Lredsx Izktopfx Aiion Engine make/model: Isuzu 4JB1ZY-01 Rate output: 50kW , 2500rpm

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Öwamat 4 Lrsdpfx Aovu A Hdjiien Oil-injected screw compressor with variable speed control Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Condition: excellent (used), Year of construction: 2019, MANUFACTURER: DRYTEC MODEL: MDA3600 Lrjdeyzzuljpfx Aiien SERIAL NO.: 3519MBP00146 YEAR: 2019 POWER (kW): 0.075 CAPACITY (m3/min): 60 PRESSURE (bar): 10

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Lrjdpfxohpx U Ao Aiien

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Lrodpfxeyzhmbo Aiisn Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message.

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Lrjdpsyy U I Nsfx Aiien Serial number: 149-8393351 16 Bar 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 3101, Kaeser TD51 Refrigerated air dryer Ljdpfeqqhkpox Aiisrn Serial: 3101 2003, Refrigerant R34A, 18Bar

Condition: good (used), The screw compressor is being sold because the workshop is being closed down. It has been regularly maintained and is available immediately. It is still connected to the power supply and can be inspected and tested for proper functioning. Includes compressed air tank. Lrodpfx Aijhgvwqeijn

Condition: excellent (used), Year of construction: 2018, operating hours: 50,708 h, functionality: fully functional, Compressed air dryer Atlas Copco FD1750+ 14 bar 105 m3/min Lrodpeyr A Uyefx Aiion

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Atlas Copco FX13 compressed air dryer, 10.02 m³/min Lredjyrdifopfx Aiion

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The mobile dry air dryer of type KKT dries hygroscopic granulates directly next to your processing machine, and is also equipped with a TYPE 608 conveying unit. The saturated dry air flows through two alternating desiccant containers, where it is re-dried. This creates ultra-dry air with a dew point of approx. -35 °C. Dry air dryer: KKT 100S Dry air flow rate: 100 m³/h Desiccant containers: both NEW Container volume: 200 liters Mobile design Convenient touchscreen menu navigation Conveying unit: TYPE 608 Number of material types: 1 Blower: 1.1 kW Lsdpfxeyxay Ij Aiisrn Capacity: 8.5 liters Voltage: 230/50