Used Compressed Air Systems for sale (53,822)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 223230, Offer 25279 Technical data: Gedew Ekkwjpfx Afijuh - Tank capacity: 2000 L - Operating pressure: 11 bar - Maintenance opening - Ball valves - Pressure gauge - Space required: approx. W 1250 x H 2500 x D 1250 mm - Weight: approx. 450 kg

Condition: good (used), Year of construction: 1999, Refrigeration dryer Manufacturer: KAESER Type: TE 121 Year of manufacture: 1999 Motor rated power: 2.1 kW Maintenance carried out by Kaeser. Gujdjttwzbjpfx Afijh 91025ä

Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Guodpfx Aov Srfksfieh Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Ram stroke 12 mm Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Very good condition

Condition: good (used), Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank, compressed air storage -Compressed air tanks: compressed air storage -Type: CMBB container Ø 200 x 400 mm Godpfx Aexaz H Nefiouh -Contents: approx. 12 L -Operating pressure: 11 bar -Technical data: see photo type plate -Dimensions: 500/270/H235 mm -Weight: 6.5 kg

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 944 kg, operating pressure: 14 bar, pressure (max.): 14 bar, compressed air connection: 14 bar, pressure: 14 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. Guodpfx Aer En Ttefieh We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Gujdpfx Afemt Dbheioh Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2007, machine/vehicle number: 33340007007005, Bearing no. 19298 Gjdper Ddw Usfx Afieuh Technical data: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg

Condition: like new (used), Year of construction: 1993, Receiver 500 L Gedpfx Afsvx Uzzsisuh 0 11 bar temperature 50 °C Compressed air tank K 46405 500 liters high: 2200 mm Ø 600 mm

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: MB 478441206, tank capacity: 750 l, total length: 180 mm, total width: 500 mm, overall weight: 60 kg, pressure (max.): 11 bar, pressure: 11 bar, temperature: -10 °C, Compressed air tank 750 litres for collection in Hildesheim, fully functional, regularly TÜV-inspected. Gusdjxc Er Uopfx Afioh

Condition: ready for operation (used), Speed range up to: 12000 rpm Power at 6 bar compressed air: 900 W Stitch length (length of extension): 1000 mm Guodpfjd Iatiox Afieh thread outlet: 45 with collet: 6 mm

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 794 kg, operating pressure: 11 bar, pressure (max.): 11 bar, compressed air connection: 11 bar, pressure: 11 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. Guodjr En Taspfx Afijh We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger Gsdpfxjmt Dcfj Afijuh In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: good (used), Year of construction: 2001, machine/vehicle number: 2000003196, Offer 19301 Technical data: - Operating pressure 16 bar - Inlet capacity up to 17 m³/h - Refrigerant R 134 A - Drive 400 V / 2.52 kW - Space requirement approx. W 860 x H 2200 x D 1300 mm Gusdsr Ezcqspfx Afieh - Weight approx. 700 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer Fasti GmbH Type ERD 65 B Gujdpfxjvzwrbs Afish Connection value 0.9 kW Two available! Price 850 EUR per piece!

Condition: used, Year of construction: 2003, pressure max. 8,24 BAR Receiver 2,8 L Temperature range max. 50°C - min. 0°C °C In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Godpfx Afjw S Nk Ueieuh subject to prior sale!

Condition: new, 3-way connection with plug-in coupling and connection thread 1/2 " 3 pieces available Gjdpfx Afogz S Svjisuh

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 649 kg, operating pressure: 8 bar, pressure (max.): 8 bar, compressed air connection: 8 bar, pressure: 8 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. Gedpfx Afer En S Dsijuh The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: new, Year of construction: 2025, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Gujdpfxexbzale Afieh Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: ready for operation (used), Year of construction: 2006, compressed air connection: 50 bar, volume flow: 1,500 m³/h, operating pressure: 50 bar, pressure dew point: 3 °C, input voltage: 400 V, High-pressure freeze dryer 50 bar, capacity 25 m3 per minute Gedpfxexbd S De Afiouh

Condition: good (used), Year of construction: 2013, machine/vehicle number: 581851, OKS Air receiver tank Serial: 581851 Godpeqqhmkofx Afieuh 2013, 300l air receiver tank, working 11Bar,

Condition: new, Year of construction: 2019, functionality: fully functional, volume flow: 324 m³/h, total height: 1,285 mm, overall weight: 165 kg, ALUP AD325 adsorption dryer 2019 NEW never used. Gedpfxsu Rpg Ts Afisuh for sale brand new dryer old stock (2019) includes two brand new filters. capacity : 324 M3/H height : 1285 mm width : 620 mm depth : 571 mm weight: 165 kg connection: 1" 1/2 tested and ready for use.

Condition: new, Year of construction: 2025, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. Gedpsxby D Ajfx Afijuh High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 575531, OKS Air receiver tank Guedpoqqhtujfx Afieh Serial: 575531 2012, 500L tank, 11Bar

Condition: good (used), Year of construction: 2003, machine/vehicle number: 3101, Kaeser TD51 Refrigerated air dryer Serial: 3101 2003, Refrigerant R34A, 18Bar Godpfx Afjqqhkpoijuh

Condition: good (used), Year of construction: 2012, Kaeser TCH26 Dryer Serial: 1160 Gusdeqqhtmopfx Afioh 2012, Refrigerated air dryer, R134A, 16Bar