Used Compost for sale (95)

Year of construction: 2001, condition: used, functionality: fully functional, Compost turner BACKHUS 10.10. Chedszudwtepfx Agred Diesel engine: 264 hp Weight: 14.9 tons

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Csdpoyr H Anjfx Agrjhd Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Compost Turner BACKHUS 10.10. Diesel engine: 264 hp Weight: 14.9 t Current videos can be provided upon request. Chodpfx Agsy Equ Herod

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Chedpfxsz Rv Tds Agrod Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) Cedpfjzg Dx Usx Agrjhd - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Cjdpfozt I Ruox Agrohd

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, The machine is operational. Sandblasting and repainting of the paintwork and other parts are available for an additional charge upon request. Serviced. Last service: April 2025. Operating manual available. Deutz 6-cylinder engine, 240 hp. Dimensions (length/width/height): 3.45/4.65/3.35 m. Operating dimensions: Wavelength 3.88 m, diameter 1.0 m. Weight: approx. 10,000 kg. Cedozkrrwopfx Agrjhd Delivery rate: 300–2,500 m³. Mileage: unknown, odometer defective. Upon request, we will gladly send you a short video of the machine in operation.

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 338 kW (459.55 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel Chedpfx Agjzdtzmersd • Power: 338 kW / 460 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of rotors: 48 • Rotor speed: 1300 rpm • Tow hitch: 40 mm • Fiberizing of organic material for composting up to a diameter of 30 cm • Shredding of old wood, waste wood up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2019, Doppstadt HS 800 Star Screen Hooklift Chsdpfs Ad N Ugex Agred Manufacturer: Doppstadt Model: HS 800 Star Screen Hooklift, fraction 0-80mm Year of manufacture: 2019 For sale: a Doppstadt HS 800 star screen in hooklift design from the year 2019. Equipment: 2-fraction design Central lubrication system Hooklift system Operating weight: approx. 9,000 kg Additional interchangeable star screen kit, year of manufacture 2020, fraction 0-100mm The machine is in good and operational condition. Thanks to the additional star screen kit, the machine can be flexibly adapted to different material requirements. Ideally suited for processing compost, biomass, wood, green waste, and other bulk materials. Further information, photos, or an appointment for viewing are available upon request. Price: Upon request Location: Upon request Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Chodpfxow Tir Is Agrod

Condition: excellent (used), Year of construction: 1991, For sale: a screening bucket from the renowned Van Dalfsen brand, model HPL 2000 SP20. Specifications: • Type: Screening bucket (rotational) • Model: HPL 2000 SP20 • Drive: hydraulic • Working width: approx. • Technical condition: good, fully functional Chodpez Sk T Nofx Agred • Ideal for screening soil, compost, rubble, stones, etc. - Robust construction, ready for operation - Suitable for excavators and loaders.

Year of construction: 2026, condition: new, Autonomous RS1 and modular RS2 containers in the CompoFlow system represent the latest solutions for the biological processing of organic waste. Designed for mobile and decentralized biowaste collection (RS1), as well as stationary operation at composting facilities (RS2). Perfect for ensuring a controlled process of composting, biodrying, and biostabilization, along with efficient organic waste logistics. Each composting system is tailored to the individual needs of the client. After analyzing the material intended for processing, we specify the required number of containers and the necessary composting capacity. Made in Poland – Eco-friendly – Durable – Certified – EU compliant Composting significantly increases recycling rates. RS TEAMTECH Sp. z o.o. Cedsikq Eyepfx Agrshd

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, I am selling: TRASMEC COC800DN Mobile Screw Loader/ Conveyor in a good working condition. Manufactured in 2009 by the well-known Italian conveying equipment manufacturer TRASMEC S.r.l. Suitable for handling wood chips, sawdust, biomass, shavings, pellets, compost, and other bulk materials. Ideal for sawmills, pellet plants, biomass facilities, recycling operations, and wood-processing companies. Specifications Manufacturer: TRASMEC S.r.l. (Italy) Model: COC800DN Year of Manufacture: 2009 Serial Number: AL0581C-C006603 Mobile wheeled design Heavy-duty steel construction Industrial screw conveyor system Electric drive Chodpfxezcu Hve Agrjd CE-marked European equipment Condition Used industrial equipment Structurally sound Applications Wood chips Sawdust Biomass Wood shavings Pellet production Compost and organic materials Bulk material handling

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Chjdpfx Agey Hi D Sered Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2015, ALLU DS 4-12 bucket separator / screening bucket – manufactured in 2015 – 2,070 kg. For sale: an ALLU DS 4-12 bucket separator/screening bucket, manufactured in 2015. High-quality Finnish ALLU attachment for processing a wide variety of materials directly on the construction site. Technical data: * Manufacturer: ALLU Finland Oy * Type: DS 4-12 * Year of manufacture: 2015 * Serial number: DS41215444 * Weight according to nameplate: 2,070 kg * Recommended hydraulic oil flow: 95–160 l/min * For excavators approx. 20–35 t * 4 drums * Robust heavy-duty design Possible applications: * Sieving soil and topsoil * Construction rubble and recycled materials * Gravel and sand * Compost and biomass * Processing and separating soil material * Depending on the shaft configuration, also crushing and mixing The ALLU D series is designed for sieving, crushing, mixing, aerating, and loading material. Condition: used, with signs of wear and tear commensurate with its age. Inspection possible by appointment. Chjdpfez Dm Nbex Agrjd

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Screen fraction: 0-20/25 mm Wheel loader mounting is installed but not included in the price. On request, we supply the separator with adapters for excavators and wheel loaders. Chsdpfsyfwbzox Agred For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Series: TSE.083.210

Condition: used, Year of construction: 2024, operating hours: 300 h, Self-propelled compost turner for the treatment of organic waste such as green waste, bio waste or microbiologically contaminated soils. JT630, semi-autonomous - windrow width up to 6.30 m Chsdpfxsizku Eo Agred - windrow height up to 2.9 m - radio-controlled with semi-autonomous functions - up to 25% fuel savings - Easy to transport and quickly ready for use

Condition: excellent (used), Year of construction: 2019, Doppstadt HS 800 Star Screen with Hooklift System Manufacturer: Doppstadt Model: HS 800 Star Screen with Hooklift System Year of Manufacture: 2019 For sale is a Doppstadt HS 800 star screen with a hooklift system, manufactured in 2019. Equipment: 2-fraction version Central lubrication system Hooklift system Operating weight: approx. 9,000 kg Chodpfxozdbp To Agred Additional interchangeable star screen kit, year of manufacture 2020 The machine is in good and operational condition. Thanks to the additional star screen kit, the machine can be flexibly adapted to different material requirements. Ideally suited for the processing of compost, biomass, wood, green cuttings, and other bulk materials. Further information, photos, or an inspection appointment are available upon request. Price: Upon request Location: Upon request Errors and prior sale excepted.

Year of construction: 2021, condition: used, The separator was used in the production of flowable fill (liquid soil). Primarily, peat was shredded, which is why cross-discs are installed to ensure effective material size reduction. The PE lining ensures improved material flow. The shafts are suitable for shredding biomass and compost, as well as other soft materials such as bark, etc. The separator is equipped with an adapter compatible with wheel loader systems from Volvo, Cat, and Liebherr, as well as an overflow protection system that prevents debris from spilling over. We can also equip the separator with different shafts, such as screening shafts or mixing shafts. Please refer to the attached description. Suitable for excavators from 16 t Suitable for wheel loaders from 12 t Weight (kg): 1600 Drain line required: 2 Codpfx Ajyf Ar Eegrohd Series: TSC.184.007

Year of construction: 2022, condition: used, Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from reusable waste soil. Effective even with moist soil. Mixing in compost, sand, substrate, etc. is possible in a single pass during screening. Suitable for screening topsoil, construction waste, gravel. Ideal for backfilling structures and trench refilling, etc. Can also be adapted for other mesh sizes or shaft tasks upon request—please ask us for details. The separator comes from a buyback due to business closure. The separator has been inspected in our workshop and includes a 12-month warranty. Currently, an OQ45-5 is installed, which is not included in the price. Price: €1,750 For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Throughput: 23 m³/h Cedpjyfwdvofx Agrshd Leak oil connection required: 2 Series: TSE.103.283

Year of construction: 2025, condition: like new (used), Fine screening 0-15/20 mm. The separator is ideally suited for fine screening of topsoil and humus when it is undesirable for larger stones to be present in significant quantities in the screened material. The mixing of compost, sand, or substrate in a supplementary pass while screening with a Terra-Star also works excellently. This way, dirt is turned into new money! Disc spacing: 10 mm. Screen size: 0-15/20 mm. Fitted with an OQ45-5 quick coupler, which can be replaced or purchased for €1,890. For excavators from 6 t Csdpfxoyfwd No Agrjhd For wheel loaders from 4 t Throughput: 18-23 m³/h Leak oil connection required: 2 Series: TSE.103.569

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. Chedpfx Agsya Uuzjrjd The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h No leakage oil connection required Series: TSE.054.087

Year of construction: 2023, condition: used, The drum sieve REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! Chodpfx Agjrrvy Asrjd As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction!

Year of construction: 2025, condition: like new (used), The separator is designed for screening topsoil / humus. Screening and mixing of compost, sand, or other materials can be performed in a single operation with the Terra-Star. The four shafts deliver an impressive throughput when screening and mixing. The shafts are fitted with wear-resistant HX 500 star discs. When wear occurs, the discs can be re-welded at any time. The Terra-Star is a modern, forward-thinking system that already provides the foundation for tomorrow’s adaptability. Switching to other carrier machines is always possible, as all components are bolted. The shafts can also be converted for other applications at any time, for example, from screening shafts to mixing shafts or to any other combination. Required adapters for excavators or wheel loaders are, of course, available upon request directly from us. Chodpfoya Uu Isx Agrjd Price without mounting plate. Mounted is a Lehnhoff quick coupler, which can be retained or purchased separately. Price MS 03: €420 For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h Leak oil connection required: 0 Series: TSE.054.104

Year of construction: 2019, operating hours: 1,685 h, condition: good (used), Backers 2HTA Star Screen / Lindner ZetaStar 75 – Crawler Mobile & Hooklift System For sale is a versatile Backers 2HTA built in 2019 with only 1,685 operating hours. The machine was manufactured by Backers and was also sold under the name Lindner ZetaStar 75. The machine is ideally suited as a secondary screening unit behind shredders and pre-shredders. It performs especially well when processing bulky waste, commercial waste, green waste or waste wood, as the material is efficiently screened and the oversized fraction can be returned directly into the shredder via the hydraulically swivelable oversize conveyor. This eliminates the need for an additional excavator or wheel loader for material recirculation. Thanks to the flexible star and screen deck configuration, the machine can also be used for screening topsoil, wet clay soil, sand, compost or construction waste. The screening size can be individually adjusted; the machine is currently set up for material smaller than 60 mm. Modifications to the stars and screen deck are available at extra cost. The compact design allows easy transportation via hooklift system. On site, the machine can be repositioned quickly using the crawler track system. Technical Data: * Year of manufacture: 2019 * Operating hours: 1,685 h * 2-fraction screening * Perkins engine 74.5 kW * DEF / AdBlue system * Throughput: >120 m³/h * Operating weight: approx. 12 t * Crawler mobile with hooklift system Transport Dimensions: * Transport length: 7.50 m * Transport width: 2.55 m * Transport height: 2.70 m Hopper: * Capacity: 2.5 m³ * Dimensions (L x W x H): 2.80 m x 1.20 m x 1.00 m * Loading height: approx. 3 m Screen Deck: * Dimensions (L x W): 4.20 m x 1.20 m Special Features: * Hydraulically swivelable oversize conveyor * Direct recirculation of oversized material into the shredder * No additional wheel loader required for recirculation * Adjustable screening sizes available * Suitable for various materials * Compact and highly mobile design The machine is in good condition and ready for immediate use. Ideal for recycling companies, composting operations, wood processing, waste management or earthmoving businesses. Viewing and test operation possible by appointment. Cedoy Ui Erjpfx Agrjhd If interested, please feel free to contact us. Notes: * Sale excludes any warranty or guarantee. * No returns or renegotiations. * Subject to prior sale. * All information provided without guarantee. The seller accepts no liability for errors, omissions or changes in the description. * Sale is subject to prior sale at any time.