Used Component Insertion Machine for sale (70,923)

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. Fgedpfjzu Tu Iox Ak Uog As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Year of construction: 1999, condition: excellent (used), Spot welding machine NIMAK PMP 5/35 + water cooling unit Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Fodpfx Ajium Nisk Uogg Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Fodpfx Aox Rhlcok Uegg Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Quantity: - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines - Suitable for metal edge preparation and beveling applications Fgedpfx Akjzyah Ss Ueg - Supplied in transport cases - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. The listed price is for both units. Individual sale can also be arranged. Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Condition: good (used), Year of construction: 2000, clamping force: 4,000 kN, _TECHNICAL DATA – ENGEL ES 1800H/500W/400 HL-2F_ _INJECTION UNIT_ | AG1800H | AG500W Screw diameter: 70 mm | 40 mm Screw length: L/D 20 | 20 Metering stroke: 270 mm | 200 mm Screw speed: 226 rpm | 400 rpm Shot rate: 81 g/s | 32 g/s Injection rate: 386 cm³/s | 198 cm³/s Max. shot volume: 1039 cm³ | 251 cm³ Spec. injection pressure: 1441 bar | 1300 bar Spec. inj. pressure (increased): 1735 bar | 2020 bar Nozzle stroke: 750 mm | +5/-100 mm Nozzle contact force: 144 kN | 63 kN Heating capacity: 30.2 kW | 11.4 kW Heating zones (incl. nozzle): 5 | 7 _CLAMPING UNIT_ Clamping force: 4000 kN Opening stroke: 950 mm Ejector force: 82 kN Fedszvf H Eepfx Ak Usgg Ejector stroke: 250 mm Max. platen distance: 1550 mm Min. mold height: 600 mm Platen BAP: 1400×1080 mm Platen FAP: 1400×1200 mm _DRIVE_ Pump power: 55 kW Oil (main tank): 540 l Oil (suction tank): 400 l _WEIGHT (without oil)_ Clamping unit: 27 850 kg Inj. unit AG1800H: 5 600 kg Inj. unit AG500W: 1 000 kg

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Fedpfszav D Djx Ak Usgg Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Fgodpfx Asw U Sf Tek Usg Spindle taper BT40, 24 station ATC

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, MONTANA DIAMOND Crystal Glide Ski Servicing Robot – in excellent condition and ready for immediate use! For sale is a high-performance, fully automatic machine for professional winter sports servicing. This machine is specifically designed for workshops with high service volumes and, thanks to its 2 grinding stones, delivers first-class, fully automatic results. What makes this machine special: it has been meticulously maintained, cared for, and serviced by the owner himself throughout the years. It has been completely overhauled – many important core components, including the motors, have been recently replaced. Ready for immediate use – no backlog of maintenance required. The machine can be put into operation directly in your workshop. Fedpfx Aezv Sqdok Ujgg The price includes 2 grinding stones, diamonds, and sensors (value of approximately €3,400). Please refer to the attached documentation for detailed technical information and specifications. Viewing is possible until the end of September. Pick-up only / transport must be arranged by the buyer. Sale to businesses, excluding any warranty. For sales to foreign countries: VAT invoice IGL (Intra-Community Supply).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: SRC12NC0423, controller manufacturer: Siemens, overall weight: 700 kg, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 70 l, operating pressure: 210 bar, number of digital displays: 1, Equipment: emergency stop, Tube Expanding/Reducing Machine PE-TRA SRC-12 NC We offer a used, fully functional PETRA SRC-12 NC machine for hydraulic tube end expanding/reducing. The machine is designed for professional industrial applications. The machine features 12 expanding stations, enabling multi-stage forming processes. The design was developed with demanding industrial applications in mind, including the production of tubular structures, the shipbuilding industry, industrial installations, and the production of exhaust systems. Key features: - Manufacturer: PETRA - Model: SRC-12 NC - Used machine - 12 expanding stations - Hydraulic drive system - Hydraulic system power: 4.5 kW - Maximum hydraulic pressure: 210 bar - Hydraulic tank: 70 l - Control: Siemens PLC + HMI - Operator panel with touchscreen - Simple selection and adjustment of tool stations - Programmable and adjustable expanding sequences - Foot control - Power supply: 380 V / 3 phases / 50 Hz - Robust construction for industrial applications Applications: - Production of tubes and tubular components - Shipbuilding industry - Industrial installations - Production of exhaust systems - Forming and expanding tube ends Fgedpfezy I H Nox Ak Ueg Transportation is the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2013, 3Engel Victory30H/80V/160 combi Ecodrive / Production line with Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of manufacture: 2013 Injection unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Tie bar distance: 0x0 mm Size of clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: 2-component injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed, and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control system with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motors controlled with inverter Proportional valves on injection units - precise injection Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/shot There is the option to purchase a rotary table Robot Sepro SR S5-25 S3 Trans Year of manufacture: 2013 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel ranges in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel Fodpfx Akozy Iqne Uogg Safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 8700 kg Length/Width/Height: 5.35x1.76x3.42 m All machines offered will be started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Fgodpfx Aeydvzdek Uog Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Fgedpszuxn Tefx Ak Ueg Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor Fsdpfx Akjzu Anwj Uegg For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power of the milling unit: 11 W, saw blade diameter: 450 mm, working length: 12,000 mm, working width: 3,500 mm, Essetre Multiwall XS with 5-axis milling unit, 11 kW, 1,000-18,000 RPM, rotary table Liquid-cooled, 22 kW inverter Machining length: 12,000 mm, machining width: 3,500 mm, machining height: 400 mm 3 sets of dowel insertion units, including a Beck wood dowel insertion unit Fgedpfx Aksyq S Itj Ujg Automatic, adjustable reference stops on both sides Rotary 8-position tool changer Pneumatic system with 12 clamping elements Sawing unit, 450 mm Chain saw unit Integrated butterfly rotary table, CNC controlled, up to 4,000 kg Projection laser for projecting the panel onto the machine table Dust extraction system with floor duct The system is connected and ready for demonstration Availability is short-term.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. Fgedpfjzyrpnex Ak Ueg The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Seriennummer 90319000000, measuring range X-axis: 500 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, The following components: XM-5000A 3D measuring system / serial number 9031900000. 2 measuring probes. LAPTOP for the XM production measuring system with measuring software on Windows 11. Measuring table for the production measuring system. User manual in German. Measuring range: X: 500 mm, Y: 300 mm, Z: 200 mm Measuring accuracy: (7+9L/100) micrometres Repeatability: ± 3 micrometres The system was only used for a specific measuring application for measuring parts in special purpose machine construction. No use in production. Fgjdpfjyi E Ikjx Ak Ujg The system was delivered on 20.06.2024 directly from Keyence.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: Fgedpfsyzf Naox Ak Uog 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Fodpfx Ajzmyzfok Usgg

Year of construction: 2007, condition: used, functionality: fully functional, Hello, Fgodsym Uubjpfx Ak Usg we are selling our epoxi mixer and applicator Wagner colora. The machine is in working condition but it needs some cleaning and small repairs. We use it for the mixing of the A component Tenax RESINA 5030 and B component Indurente BB30H and use it for the stone slabs reinforcement. The machine is mounted on the mobile steel plate with wheels. For the working it needs 2x 240V power supply for the heating belt for both components and compressed air for working. In the offer is also a lot of spare parts like an extra application gun, a lot of mixers for the resin, one way valves, set of gaskets for the both dosing cylinder. I can send an video of working. Best regards,

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Fedpfow I D Iaex Ak Uogg Machine was used in the production of ventilation ducts and fittings. AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components).

Condition: excellent (used), functionality: fully functional, working width: 300 mm, brushing unit diameter: 240 mm, total length: 3,600 mm, total width: 1,000 mm, total height: 900 mm, height adjustment type: electric, overall weight: 400 kg, working height: 100 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, workpiece length (max.): 3,600 mm, WOOD AGING BRUSHING MACHINE | 4 BRUSHES | 300 MM Sanding machine for aged wood JBS MACHINERY PROCHERA! Professional PROCHERA brushing/sanding machine designed for structuring, brushing, and aging wood. The machine features 4 independent brushing units and a conveyor belt with adjustable feed speed. It is a robust industrial design intended for continuous processing of wooden components. This brushing machine is ideal for producing aged boards, wooden flooring, facades, countertops, decorative elements, paneling, and other products requiring the enhancement of the natural wood grain. TECHNICAL DATA - Manufacturer: PROCHERA - Type: brushing/sanding machine for wood structuring - Number of working units: 4 - Number of brushes: 4 - diameter 240mm - Maximum working width: 300 mm - Maximum height of workpiece: 100 mm - Feed speed: 0–23 m/min - Conveyor: belt type - Feed speed adjustment: stepless Fedpfxozxz T To Ak Uogg - Adjustment of working units: independent - Brush working direction: option for co-rotating/counter-rotating operation Gross price including VAT margin or 23% VAT invoice PROCHERA uses various types of brushes in these machines, allowing for both delicate and deep surface structuring. The first units can be equipped with metal brushes for more aggressive grain exposure, and subsequent units can use abrasive brushes for further processing and surface smoothing. The machine is primarily intended for: wood brushing, surface structuring, wood aging, exposing the natural grain pattern, surface preparation before oiling, wood preparation before waxing or varnishing, production of flooring boards, production of facade boards, production of countertops and decorative elements, processing of solid wood. Thanks to the four working units, it is possible to achieve multi-stage surface processing – from a strong opening of the wood structure to its further smoothing and finishing. WHY IS IT WORTH IT? This is a professional machine for companies involved in the production of aged boards, flooring, facades, countertops, and wooden decorative elements. Four working units allow for significantly greater flexibility compared to simple single-unit brushing machines. Adjustable feed allows for the selection of operating parameters for a specific material and desired effect. The machine is ready for further operation. Possibility to view the machine and test its operation after prior contact. JBS MACHINERY JBS MACHINERY GROUP Sp. z o.o. New and used woodworking machines Professional wood processing equipment Possibility to arrange transport in Poland and Europe. We invite you to contact us regarding price, additional photos, a video of the machine in operation, and details regarding transport.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Two identical machines are available, manufactured in 2021. The machines were only used for a short period in a test run at a large warehouse and were then professionally disassembled and stored. Therefore, they are in very good, fully functional condition. Documentation for the machines is available. The XF/XP 111 M is a fully automatic strapping machine with an upper sealing unit. It is designed to strap a large number of pallets of various sizes vertically with PP or PET strapping. This system is reliable, easy to operate, and, thanks to its compact dimensions, can be installed in a very small space. For PP and PET strapping Vertical strapping Tension up to 5,500 N Siemens PLC S7 Compact, minimal footprint Easy access to all mechanical components Simple operation with a touch screen The machines have been professionally disassembled and stored – they are available immediately. Additionally, 90 new, original Cyklop strapping rolls are also optionally available. Fjdpfsw Htz Iex Ak Ujgg Price per machine, net, plus VAT. A special price of €44,000 net, plus VAT, will be offered if both machines are purchased, ex warehouse RyFo.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Fgjdpfx Akeya H Nkj Ujg Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) Fsdpfx Aszwdv Uok Ujgg • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Fedexghngopfx Ak Uogg As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15