Used Compact Inverter for sale (5,515)

Condition: ready for operation (used), AUTOMATIC PALLET STRECH WRAPING MACHINE - PALLETIZER OCTOPUS COMPACT MADE BY HALOILA, FINLAND 30 PALLET PER HOUR VERY GOOD CONDITION Kwodpfoyb H Hfox Ad Nst VIDEO ATTACHED

Condition: new, Year of construction: 2026, The LUFT 1500 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK combine state-of-the-art pneumatic solutions with the use of high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Technical parameters Ksdpfx Aeyb Dmisd Nswt Motor power: 11 kW / 15 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 1650 L/min Air delivery at 6 bar: 1580 L/min Air delivery at 8 bar: 1320 L/min Air delivery at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 × 740 × 1050 mm Weight: 380 kg

Condition: new, Year of construction: 2026, The LUFT 1000 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK represent the most advanced solutions used in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Kjdpjybz Spsfx Ad Njwt Technical parameters Motor power: 7.5 kW / 11 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection diameter (G): 1/2" Dimensions: 1470 × 620 × 900 mm Weight: 130 kg

Condition: new, Year of construction: 2026, English translation: The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Kwjdpoybvkasfx Ad Njt Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,870 kg, lifting power: 700 kg/m, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, digging bucket width: 120 mm, Year of construction: 2025, Equipment: additional headlights, head guard, standard shovel, trailer coupling, The H&R 1607T telehandler is our smallest loader with a cab. It is exceptionally maneuverable and can be used wherever space is limited. With a lifting capacity of 700 kg, the H&R 1607T telehandler lifts loads weighing up to 700 kg to a height of 2.82 m (bottom edge of the standard pallet fork). Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1607 loader reaches a top speed of approximately 16 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-mounted tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1607T Skid Steer Loader • Fully equipped • Extensively optimized in Germany • Telescopic boom for extended reach • Ideal for tight work environments • Includes standard 120cm bucket and pallet forks • Comfortable cab with heating, ventilation, and radio (USB/MP3) • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools Kodpfxev Tabio Ad Nowt • Hydraulic oil cooler • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,290.00 VAT: €3,665.10 Gross: €22,955.10 Financing available! Optional 2-year warranty €595 TÜV (road approval) €870 Transport within Germany and Austria for an additional charge Please provide us with your address; we will be happy to provide you with a free, non-binding quote. Technical specifications Lifting capacity: 700 kg Lifting height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (bottom edge of standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: Perkins 3-cylinder diesel Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 2964 x 1160 x 2340 mm Weight: 1740 kg Standard tires: 26 x 12.00-12 Accessories and spare parts are not included. Available from us. Please provide your phone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,550 kg, empty load weight: 2,000 kg, lifting height: 2,530 mm, number of seats: 1, Year of construction: 2025, fuel: diesel, load capacity: 950 kg, Equipment: all wheel drive, head guard, hydraulics, pallet forks, standard shovel, H&R Loader 2010-S25: The compact wheel loader for versatile applications with an open cab and narrow track. With a powerful 25 HP 3-cylinder Perkins Turbo engine from Germany and robust all-wheel drive, this compact wheel loader offers outstanding lifting capacity and high maneuverability – perfect for heavy loads and tight work environments. Advantages of the H&R Wheel Loader 2010-S25 Powerful engine from Germany: The 3-cylinder Perkins Turbo engine with 25 HP delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 950 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2010-S25 • Lifts up to 950 kg at 2.53 m (bottom edge of standard pallet fork) • Extensively optimized in Germany • Narrow track for tight work environments • Supplied with standard bucket and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gear shift for precise control • 3rd and 4th control circuits for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Trailer hitch for additional trailer use • 220 V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,150.00 VAT: €3,638.50 Gross: €22,788.50 Kwodjrdzymopfx Ad Net Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 3-cylinder Perkins Turbo Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lift height: 2530 mm (bottom edge of standard pallet fork) Lift capacity: 950 kg Wheelbase: 1595 mm Tires: 31×15.5-15 Dimensions: 3380 x 1407 x 2340 mm Weight: 1980 kg Spare parts and accessories are available from us.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,470 kg, lifting power: 1,200 kg/m, lifting height: 2,489 mm, tire size: 31x 15,5 - 15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 04/2025, emission class: euro5, digging bucket width: 1,600 mm, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, H&R 2412 – The compact wheel loader for versatile applications with an open cab Advantages of the H&R 2412 loader Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 1200 kg, the H&R wheel loader remains extremely maneuverable with a relatively small turning circle – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the included standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2412 • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights • Trailer hitch for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • Includes 1-year spare parts warranty Price Net: €18,680.00 VAT: €3,549.20 Gross: €22,229.20 Financing available! Kwedpfx Adswd I Epj Not Optional Road registration / operating permit: €695 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting height: 2489 mm (bottom edge of standard pallet fork) Unloading height: 2023 mm (standard bucket tipped out) Lifting capacity: 1200 kg Wheelbase: 2173 mm Dimensions: 3740 x 1600 x 2460 mm Weight: 2400 kg Tires: 31×15.5-15 Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, color: blue, overall weight: 3,500 kg, empty load weight: 32,000 kg, operation weight: 3,210 kg, chain condition: 100 %, number of seats: 1, first registration: 09/2024, emission class: euro5, Year of construction: 2024, operating hours: 2 h, machine/vehicle number: B33, Equipment: additional headlights, adjustable boom, adjustable chassis, cabin, hammer hydraulics, rubber tracks, standard shovel, Our latest excavator the H&R B 33 The new version has a double-sided swivel arm and a transport weight of 3200 kg. It has a transport weight of 3200 kg, is 4.95 m long 0.98 / 1.5 m wide and 2.54 m high and has 2 travel speeds of approx. 4.5 km/h. The bucket is 0.4 m wide and has a capacity of 0.095 cbm and is equipped with a quick coupler. The Kubota D1505 engine has 18.5 KW and complies with the latest E-5 emission standard The excavator is also CE approved Kjdpfxjulygls Ad Newt Optionally there is an auger and a demolition hammer or an adjustable humus bucket in different widths from 0.80m to 1.2m wide Spare parts are available from us. 2 years warranty and 1 year guarantee are of course included. Spare parts supply and service is guaranteed by us Financing with terms of 48-84 months is also possible. 28485,- net 5412,15 19 % 33897,15,-€ gross

Condition: used, Year of construction: 2011, operating hours: 2,524 h, 2011 | Haulotte Compact 10 (10m) | Used Scissor Lift | 2524 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 33 approved ✅ 7 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Electric overload problem, basket is in overload, lifting doesn't work up, front side bar little bended 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37984 Equippo" is commonly used when looking up more details online. Kwsdpox Ut Uwjfx Ad Nst 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 160788 € 3038.89 € 3 kW 12 mm 6 mm 6 mm 3 mm 6 mm Kodpfxjwiqr Ae Ad Nswt 26,5 kW 250 mm 16 mm 160 x 160 mm 200 x 150 mm 6000 mm 58 kg/m +/- 0,2 mm +/- 0,05 mm rund, quadratisch, rechte 40 m/min 94 m/min 30 m/min 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Four-sided planing machine with 5 axes, type COMPACT CE safety standards 3 x 400 Volt Standard machine LMC 523 C - O-R-L-B-O Infeed table 2500 mm Pneumatic side pressure on left vertical axis Split top pressure roller Additional tables for multi-saw before axis 5 Kodjya H Igepfx Ad Nowt Anti kick-back safety device Schneider touch screen EASYSET NC control for pressure beam height 2 x NC control for axes 3+4

Year of construction: 2025, operating hours: 150 h, condition: like new (used), functionality: fully functional, We are offering this as-new semi-automatic filling and capping machine: Monoblock Tenco Jarsélite Semi-Automatic Compact Filler, year of construction 2025. Performance: up to max. 500 units/hour, depending on product, fill volume, and operator. Filling volumes: 50–1,300 ml, with precise dosing adjustment. Ksdpfx Adeya Ar Uo Nowt The bottle neck can be flushed with nitrogen. This machine is suitable for filling virtually any product. This filling and capping machine is ideal for liquid and viscous products in the food, beverage, cosmetics, pet food, honey, and fruit brandy sectors. The machine handles a wide variety of product consistencies: Liquid products are fed directly via a tank connection, while viscous products can be added using the optionally available hopper. Depending on your requirements, the machine can be configured as a bottle or pouch filling system. Chunky products such as pesto, ketchup, soups, and sauces can also be processed easily. Various capping heads are available to enable flexible adaptation to different closure systems. With a special kit, spout pouches can also be filled and sealed, creating a 2-in-1 system (Pouchélite). We have integrated a nitrogen flushing feature for bottles and pouches. Currently, one capping head is included: 28 ROPP. The machine is operated solely via compressed air and enables hot filling. If you have any questions or require further information, please don't hesitate to contact us by message or phone.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Kedsyayumjpfx Ad Njwt Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: good (used), Year of construction: 2007, SCM Compact XL four-side planer - Italian production - year of production 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW Kodpfxshrdmij Ad Nowt 4) horizontal, top 230 mm 7.5 kW all spindles up / down, right / left spindle diameter 40 mm from the top 3 introducing rollers, metal, torsion, including 2 double top pulling roller, double rubber pressure 1 pc on the side a rubber pulling roller in the lower table top feed on cardan shafts pneumatic clamps smooth regulation of the feed speed 5-22 m / min 1.1 kW feed motor electric setting of the planing thickness 0.37 kW lifting motor the length of the introducing table top 2470 mm locked in the cabin central lubrication of the table top diameter of the extraction nozzle 150 and 180 mm dimensions (length / width / height) 3650/1200/1600 mm weight approx. 1500 kg

Condition: excellent (used), Year of construction: 2011, Four Side Planer SCM Compact NTE - after the technical review - Italian production - year of production 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 lower spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 lower spindle 5.5 kW six top pull rollers pneumatic pressure adjustable feed on the inverter feed speed range 5-25 m / min Kodpfxjgyflcs Ad Newt adjustable heads table top length 2480 mm electric brakes nozzles diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (length / width / height) 340/160/170 cm weight 2480 kg

Condition: used, Year of construction: 2014, machine/vehicle number: 946221, Weights Empty weight: 6.700 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Solideal Max. horizontal reach: 760 m Transport dimensions (LxWxH): 5.95x1.75x1.96 Additional information Kwjdpfxex Hdg Ie Ad Njt Please contact PFEIFER GROUP for more information

Year of construction: 2003, condition: excellent (used), EMC Mains filter Make Hitachi for frequency inverter Filter for FFFB - SJ300- 750/900 HF,L 300,100 HF further data,see picture 3 x 220 Ampere Kodpfx Aogrhimjd Newt length 1000 mm width 300 mm height 190 mm

Condition: used, Year of construction: 2002, Wittmann Compact 105 Kwodpoxrv Ulsfx Ad Net Year of manufacture: approx. 2002 Connection: 6 kW Available: 2 units

Condition: excellent (used), Year of construction: 1995, Demag Ergotech 80-310 Compact Closing 80 tons Year of manufacture 1995 Joist spacing 40x40 Scrow 40 would like Spritz softened 196 g Kwedjwav Htspfx Ad Nst

Condition: excellent (used), Year of construction: 1996, Demag Ergotech 1000/430 Compact Closing 100 tons Year of manufacture 1996 Scrow 40 mm Injection molded, softened, 205 g Joist spacing 40x40 Kwedpfx Adowav I Dj Nst

Condition: excellent (used), Year of construction: 1993, Demag Ergotech 200-50 Compact Closing 50 tons Scrow 30mm Kodpfx Adswgdd Te Nswt Hole spacing 35.5x35.5

Condition: used, mileage: 208,000 km, power: 66 kW (89.73 HP), first registration: 02/2011, fuel type: diesel, maximum load weight: 660 kg, color: black, gearing type: mechanical, emission class: euro5, number of seats: 5, Year of construction: 2011, - Used Ford Connect commercial vehicle - Year 2011, 1800 Tdci 90 hp engine, Euro 5, 204,000 km. - Vehicle type-approved as a 5-seater van, protective lining for the cargo area, - Tow bar - Air conditioning, ABS, Radio, Spare wheel, Two sets of keys. - Vehicle in fair condition, Tyres at 60%, Bodywork in fair condition, Interior intact, Timing belt already replaced at 158,000 km. CARLO MAURI S.r.l. – Lurago d'Erba – Via Vallassina 6 – Tel. 031.699.049 – Sellers: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy Opening hours: Monday to Friday: 8:30 am / 12:15 pm - 2:00 pm / 7:00 pm Saturday: 8:30 am / 12:00 pm - 2:00 pm / 5:00 pm - Certified mileage. - Test drive available by appointment. - On-site ownership transfer. - Customized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inaccuracies in this advertisement, which does not represent any contractual obligation. The prices shown are excluding VAT and transfer of ownership costs. Kwodpfxeyarlwj Ad Njt

Condition: used, The machine shapes the spine of a brochure into a square shape and presses the brochures. Min. brochure size (mm) 70×105 Max. brochure size (mm) 305 x 364 Max. brochure sheets 30 (80 g/m²) The machine is used and shows signs of wear. Kedpfx Aoyanh Ijd Nswt The machine is in working order; please refer to the images for its condition. Individual plates on the machine have been replaced with customised plates. The original plates are available and included in the scope of delivery. The sale is made without any warranty.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 40 h, machine/vehicle number: C9S1064, control type: NC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 22 t, working width: 900 mm, stroke length: 270 mm, distance between stands: 850 mm, installation height: 470 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 3, type of crowning: manual, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, upper tooling, small electric press brake C9s Kodpfx Aoxd U Hdod Newt CoastOne - Made in Finland Press force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Back stop: 2-axis controlled X-R axes Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: C9100354, control type: NC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 22 t, working width: 900 mm, stroke length: 270 mm, distance between stands: 850 mm, installation height: 470 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, number of axes: 3, type of crowning: manual, overall weight: 1,800 kg, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Front foldable support table Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment! Kodpfxjxd U Ihe Ad Nswt