Used Compact Frontlift for sale (3,910)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 5 h, machine/vehicle number: C9100358, control type: NC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 22 t, working width: 900 mm, stroke length: 270 mm, distance between stands: 850 mm, installation height: 470 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, number of axes: 3, type of crowning: manual, overall weight: 1,800 kg, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment! Chedpfx Absx At H Ts Tof

Condition: good (used), Year of construction: 2017, operating hours: 758 h, load capacity: 1,000 kg, lifting height: 1,262 mm, fuel type: electric, mast type: duplex, construction height: 1,940 mm, empty load weight: 700 kg, mileage: 758 km, This electric triplex stacker from Still, year 2017, is in good condition. The capacity is 1,000 kg. The stacker lifts up to a height of 2,024 mm. Drive-through height is 1,565 mm. ONLY 291 operating hours on the clock. The battery is equipped with an INTERNAL charger. Make an appointment for a test drive. Watch the video on YouTube. Csdpfx Abjx Ahgbj Tshf

Condition: used, Year of construction: 2005, Dimensions (LxBxH): 373 x 125 x 190 cm Wide belt sander Timesavers 900 WWS year of manufacture 2006 Serial number 2217/043 units, pre-deburring, deburring, finishingbelt width 900 mmthroughput max. 150 mm50 Hz, 400 V, 58 kW Dimensions: 3500 x 1900 x H2100 mm, weight 4000kg - Year: 2005 Codewnhdaepfx Ab Tjhf - Documentation available: No - CE certificate present: No - Transport dimensions: 3730mm x 1250mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1999, Glass rack width per compartment: 180 mm. Cjdpfxjx Dtlrs Ab Tehf Suitable for storing boxed goods. 13 compartments. Load capacity per compartment: max. 3000 kg. Glass shelf height from floor: 400 mm. Width: 6000 mm. Height: 2320 mm. Depth: 3300 mm. Condition: very good, second-hand

Condition: used, Year of construction: 2017, operating hours: 9,979 h, Liebherr A914 Compact mobile excavator from year 2017 with only 9,979 operating hours! ----* Manufacturer: Liebherr * Model: A914 Compact * Year of manufacture: 2017 * Recorded operating hours: approx. 9,979 * Including Oil Quick OQ65 SH quick coupler * German machine, first-hand * Including 1 x digging bucket * CE declaration + operating permit available * Good condition * ZSA * More photos and video on request * Price: €59,900, net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp Chjdpfx Abjx Dpyxe Tsf Kai Kortum: WhatsApp All details without guarantee or warranty, errors and prior sale excepted.

Condition: used, Year of construction: 2011, operating hours: 2,524 h, 2011 | Haulotte Compact 10 (10m) | Used Scissor Lift | 2524 hours 📍Location: France, Illange 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 33 approved ✅ 7 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Electric overload problem, basket is in overload, lifting doesn't work up, front side bar little bended 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37984 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Cjdpjxz Sk Ijfx Ab Tohf 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: C121058, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 44 t, working width: 1,300 mm, stroke length: 270 mm, distance between stands: 1,230 mm, installation height: 470 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 4, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 2,400 kg, total length: 2,350 mm, total width: 1,220 mm, total height: 2,100 mm, power: 5 kW (6.80 HP), input current: 32 A, warranty duration: 36 months, pressing force: 44 t, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Compact Electric Press Brake C12 CoastOne - Made in Finland Press force: 44T Bending length: 1300mm Spindles: 2x22T Control: TC15-2D Graphic Backgauge: 2-axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools included 36-month warranty after installation Delivery not included; available immediately Inspection under power is possible at any time by appointment! Csdpox At D Sefx Ab Tshf

Condition: new, Year of construction: 2025, Compact Material Lift 5 m / 300 kg – A Versatile Tool for Handling and Installation Tasks Key Advantages of the Lift Load capacity up to 300 kg – safe lifting of boxes, equipment, pallets, and assembly components. Lifting height of 5 meters – ideal for working at various levels, including ceiling installation tasks. Three-section mast – smooth extension of top, middle, and bottom sections for maximum working height. Self-adjusting and all-terrain wheels – easy transport over uneven surfaces, thresholds, and stairs. Codpfxew U Scfo Ab Tjhf Winch system with self-locking brake – ensures the load remains safely at the desired height. Mast lock – prevents accidental lowering in case of a lifting mechanism failure. Stabilizing outriggers – guarantee structural rigidity when operating under full load. Construction and Technology The device is designed for intensive use and ergonomic operation. The three-section mast with a telescopic system allows for compact transport dimensions while reaching the full working height of 5 meters. The mast sections extend smoothly and safely, and the integrated locking mechanisms ensure full control of the load during every stage of operation. Durable forks provide stable support for various types of loads. Their construction ensures even weight distribution, which is especially important when working with installation devices or construction materials. Large-diameter wheels and self-adjusting travel components allow the lift to move efficiently over rough terrain and in narrow working spaces. Work Safety The lift is equipped with a range of safety features, including: Self-locking brakes in the winch mechanism – protect against sudden dropping of the load. Mast lock – increases safety during stationary use and static work. Side outriggers – eliminate the risk of tipping over under heavy load. Applications This compact material lift is a universal tool suitable for many industries: Construction and technical installations – installation of air conditioners, fans, ducts, and structures at height. Warehousing and logistics – stacking goods on racks, loading and unloading delivery vehicles. Retail and exhibition setups – mounting displays, banners, advertisements, or store lighting. Industrial manufacturing – handling components and equipment during assembly of production lines. Standard Equipment Three-section mast with safety lock Heavy-duty forks Winch system with self-locking brake Two stabilizing outriggers All-terrain and self-adjusting wheels Material Lift Specifications: Parameter Value Lifting height 5000 mm Fork length 690 mm Folded height 2000 mm Length (folded/unfolded) 740 / 1880 mm Width (with stabilizers extended) 800 / 1850 mm Ground clearance 50 mm Minimum fork height 150 mm Weight 145 kg Maximum load capacity 300 kg Capacity based on center of gravity: – up to 60 cm 300 kg – up to 80 cm 250 kg – up to 100 cm 150 kg

Condition: used, Year of construction: 2003, Dimensions (LxBxH): 365 x 120 x 160 cm Four-sided planer SCM Compact P Year of construction 2003 Min/max working height 6/120mm Min/max working width 25/230mm Minimum input length is 450mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 120/165mm Input table length 2480mm Exclusive tools. Engines 1st Spindle - Under 5,5kW 2nd/3rd Spindle - Left/Right 7,5kW 4th Spindle - Above 7,5kW Dimensions 3600x1200x1500mm (LxWxH), Weight 1500kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 021918 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 1 - Lubrication system: Automatic - Feed speed: - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 12 - Transport dimensions: 3650mm x 1200mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Chjdpfxjwnhtzs Ab Tsf Yorick Diebels

Year of construction: 1999, condition: good (used), Edge banding machine IMA Compact MFA / F / 5212 Year of manufacture 1999 S/N 06601 max. edgebanding thickness:12 mm min. workpiece thickness:10 mm max. thickness of roll material:3 mm feeding speed : 12 m/min adjustment of the jointing ruler : manual heating time : 10 min Joining unit : Yes, with 2 milling units Chsdpfxjia Naqo Ab Tof Automatic roll magazine : Yes Cross cut shear up to : 0.2 - 3.0 mm Solid edge magazine : Yes Preheating of the board by radiant heater autom. gluing with glue tank granulate crosscut saw angle setting by program Multifunctional unit rounding unit/corner copying 2 motors Profile scraper Flat scraper Buffing unit Aggregate display mech.numerical display Control mode via control panel operation selector switch/ push buttons protective hood weight approx.2500 kg Dimension L x W x H 6500 x 1000 x 1600 mm CE marked technical data under reserve

Condition: good (used), Year of construction: 2017, operating hours: 971 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 971 km, MULTIPLE UNITS IN STOCK. This DUO electric stacker from LINDE, year 2017, has a capacity of 1,600 kg as a pallet truck. Lifts 800 kg up to a height of 1,010 mm. The stacker features INITIAL LIFT, making it ideal for uneven floors. All functions operate perfectly. ONLY 971 hours on the clock. The stacker comes with a 2023 battery featuring an automatic filling system and an INTEGRATED charger. Delivery within three working days. Ready for immediate use and, if desired, supplied with inspection certificate. Video to follow. Cedpfxjxz Ebto Ab Tshf

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations) Chjdpfxjhp N R Is Ab Tsf

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Codpfjxz Agysx Ab Tohf Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2024, condition: used, Exhibition machine return systemReturn system for edge banding machinesMax. part sizes: 2800 x 1300 mmMax. Part size for 4-sided edging: 1300 x 1300 mm (optional 2400 x 800 mm) Continuous feed from 7 - 20 m/min (optional 30 m/min) Adoption of the edge banding machine's forward stroke speed is possible (0 - 10 V) Electric drives with frequency converter and gear motor Pneumatic lifting function Workpiece detection via sensors Control unit with 3.2" display Height adjustable from 800 - 1000 mm Maximum weight: 60 kg Paint finish RAL 7035 Conveyor belt Conveyor belt for the return transport of the panels Speed of the return conveyor belt: 7-30 m/min Conveyor belt width: 800 mm Roller conveyor Slightly inclined adjustable roller conveyor with plastic rollers and stop for installation after the dryer as an outfeed station for the returned panels Conveyor belt width: 800 mm Variant 3 for left-hand running edge banding machine Incl. packaging A… Length of edge banding machine 4800mm – 5300mm B… Length of return conveyor belt 3000mm C… Length of roller conveyor 2500mm Roller track 1-lane with RTS Compact conveyor system extension. Addition of an additional free-standing roller track as well as a roller conveyor and lifting unit to support large parts. Using adjustable pivot points, the panels are rotated after transfer and returned almost straight via the return conveyor belt. Pneumatically controlled top pressure. Part lengths: 300 - 2400mm Part widths: 200 - 800mm Panel thickness: 8 - 35mm (panels must be inherently stable) These part sizes are recommended by Barbaric. Parts with deviating dimensions may not be functional and can cause problems. Increasing the panel length with end-face edging can lead to a risk of crushing on system components as well as on-site objects or hall columns. Ergonomics package RTS Compact Stk Ergonomics package RTS Compact consisting of a lifting table and measuring devices. Lifting table: 1960 x 960 mm. Dimensions of the blowing table: 960 x 760 mm. Steel construction with attached air cushion table with blowing nozzles for easy lifting. Table can be pneumatically lifted. Codpfjw Sy Tmsx Ab Tjhf Storage location: Garbsen

Condition: used, Year of construction: 2002, Four-sided moulder SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Csdpswnhk Tofx Ab Tehf Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 8,327 h, load capacity: 7,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,700 mm, fork carriage width: 1,500 mm, fork length: 1,600 mm, empty load weight: 10,430 kg, total length: 3,230 mm, drive type: Elektro, construction width: 1,520 mm, Compact forklift - electric Load center: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: standard Condition: ready for use and fully functional Technical condition: very good Cjdpfswgqq Hsx Ab Tohf Front tires type: super elastic Front tires size: 355/65-15 non-marking Rear tires type: super elastic Rear tires size: 28x9-15 non-marking Battery voltage: 80V Battery Ah: 980Ah Battery year of manufacture: 2020 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this ECF70-6C P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Battery: 80 V 980 Ah, Year of manufacture: 2020

Condition: good (used), Year of construction: 2017, operating hours: 861 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 861 km, MULTIPLE UNITS IN STOCKThis DUO electric stacker from LINDE, year 2017;Has a capacity of 1,600 kg as a pallet truck.Lifts 800 kg to a height of 1,010 mm.The stacker is equipped with INITIAL LIFT, making it ideal for uneven floors.All functions operate perfectly.ONLY 861 operating hours;The stacker is fitted with a 2022 battery with automatic filling system and an INTERNAL charger.Delivery within three working daysImmediately ready for use and, if desired, supplied with inspection certificate.Video to follow Chsdoxz Eaispfx Ab Tof

Condition: excellent (used), functionality: fully functional, General information: Oil-lubricated screw compressor for compressed air supply. Technical data: Chjdpfsxzuhcox Ab Tjf Drive motor: 5.5 kW Max. operating overpressure: 8.0 bar Rated speed: 2950 rpm Operating voltage: 400 V, 3-phase, 50 Hz Rated current: 14 A Ambient temperature: 3–45 °C Option: K1_T2_C48 Refrigeration dryer: Model: ABT 15 Material no.: 1.8102.5 Max. operating overpressure PS: 16 bar / 230 psig Compressed air inlet temperature: 3–60 °C / 37–140 °F Ambient temperature: 3–45 °C / 37–115 °F Refrigerant system: Refrigerant: R-513A Quantity: 0.35 kg / 0.77 lb Global warming potential (GWP): 631 CO₂ equivalent: 0.221 t / 487 lb Max. operating overpressure HP PS: 21 bar / 300 psig Max. operating overpressure LP PS: 16 bar / 230 psi No options

Condition: used, Year of construction: 2008, operating hours: 1,660 h, machine/vehicle number: CE700069, Empty weight: 3.800 kg Lifting capacity: 450 kg Codpfx Ajxznnpeb Tehf Working height: 1.206 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Solideal Transport dimensions (LxWxH): 2.64x1.78x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, Cutting width: 4600 mm Cutting height: 2070 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Feed: manual Storage location: Supplier Cedpfx Aexrpk Hob Tshf

Condition: used, Year of construction: 2000, Four-sided planer Leadermac LMC623C Year of construction 2000 min/max Working height 10/150 mm min/max Working width15/230 mm Working speed 6-24m/min Spindle speed 6000 rpm Spindle diameter 40mm Cjdpfx Aewnhv Ajb Tehf engines1st. Spindle - right 5.5kW 2nd Spindle - left 5.5kW 3rd Spindle - right 5.5kW 4th. Spindle - above 7.5kW 5. spindle - above 7.5kW 6th. Spindle - Universal 7.5kW Dimensions 4500 x 2000 x 2000 mm (L x W x H), weight 3500 kg - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: LMC623C Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2017, operating hours: 1,670 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 1,670 km, MULTIPLE IN STOCK This DUO electric stacker by LINDE from 2017 has a capacity of 1,600 kg as a pallet truck. Lifts 800 kg to a height of 1,010 mm. The stacker features INITIAL LIFT, making it ideal for uneven floors. All functions work properly. ONLY 1,670 hours on the clock. Equipped with a 2020 battery with automatic filling system and an INTERNAL charger. Delivered within three working days. Immediately ready for use and, if desired, delivered with inspection certificate. Video to follow. Chjdpfx Aoxz D S Reb Tof

Condition: good (used), Year of construction: 2017, operating hours: 696 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 696 km, This 2017 LINDE DUO electric stacker has a capacity of 1,600 kg as a pallet truck. It lifts 800 kg to a height of 1,010 mm. The stacker features an INITIAL LIFT, making it ideal for uneven floors. All functions operate flawlessly. ONLY 696 hours on the clock. The stacker is equipped with a battery with automatic filling system and an ONBOARD charger. Delivery within three working days. Immediately ready for use and, if desired, delivered with inspection certificate. Video to follow. Chedpfx Aoxzz A Tsb Tof

Condition: good (used), Year of construction: 2017, operating hours: 785 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 785 km, MULTIPLE IN STOCK This DUO electric stacker from LINDE (2017) has a capacity of 1,600 kg as a pallet truck. It lifts 800 kg to a height of 1,010 mm. The stacker is equipped with INITIAL LIFT, making it ideal for uneven floors. All functions work perfectly. ONLY 785 hours on the meter. The stacker comes with a battery with automatic filling system and an INTERNAL charger. One battery cover is missing. Delivered within three working days. Immediately ready for use and, if desired, can be supplied with inspection certificate. Video to follow. Cedpfx Ajxzzzpsb Tshf

Condition: good (used), Year of construction: 2017, operating hours: 1,021 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 1,021 km, MULTIPLE IN STOCK. This DUO electric stacker from LINDE, year 2017, has a capacity of 1,600 kg as a pallet truck. Lifts 800 kg up to a height of 1,010 mm. The stacker is equipped with INITIAL LIFT, making it ideal for uneven floors. All functions work well. ONLY 1,021 hours on the clock. The stacker comes with a battery featuring an automatic filling system and an INTERNAL charger. Delivery within three working days. Immediately ready for use and, if desired, can be supplied with inspection certificate. Video follows. Cedpfx Abjxzzx Uo Tshf