Used Collating System for sale (40,693)

Condition: used, Nikon Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Dwjdpsyiy Hbofx Alfod Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Dodpoznli Djfx Alfowd Manufacturer: MANZ PLC control, touch screen display, Siemens

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty Djdjy Dc R Tepfx Alfewd without guarantee

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: Dodpfx Aljy Dt D Djfowd KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2014, For Sale: 1x Diosna Linear System from year of manufacture 2014 including all accessories and control cabinet dimensions: Length x width x height Djdpfswlm T Isx Alfjwd 11.70 meters x 2.20 meters x 2.46 meters. Can be used for almost any type of bowl Originally used for an SP280, but can also be used with a minor adjustment for the W240 This linear system can also be sold in combination with a complete dough preparation system and multiple bowls. If you are interested, please let us know. If you have any questions or comments, feel free to contact us. Transport by arrangement. Best regards, Leo Holland

Condition: used, Year of construction: 2008, Year of manufacture: 2008 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Dwsdpfxowiwpzo Alfed Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Capacity [m³/h]: 80000 - Nominal airflow [m/s]: 22 - Negative pressure [Pa]: 3200 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 694 - Options: Fire suppression system, Control cabinet Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2017, 1.0 pcs. Contactless inspection system using a high-performance infrared camera NOXANT, capable of inspecting 400 parts per minute Camera Manufacturer: NOXANT Type: Noxcam640-IMD Year of manufacture: 2017 Technical data sheet available upon request. Dwjdpswufpyefx Alfjd Control system: Manufacturer: IMDvista Year of manufacture: 2017 The entire system is installed in a cell from Beck AG, Switzerland.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: AN98A21604, temperature: 232 °C, I am offering for sale a Nordson hot melt adhesive system in good condition. The device has been checked for function and is fully functional. The technical data can be seen in the pictures. Dwoderq D Avspfx Alfsd

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional Dsdpfxoxgumce Alfowd – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Year of construction: 2015, condition: used, Welding System Manufacturer: TRUMPF Type: TruHeat HF 5010 Year of manufacture: 2015 Technical details: Input power: 12.5 kVA Power factor: 0.95 Rated power: 10 kW Output current: 560 A (RMS) Output voltage: 1500 V (RMS) Additional information: In our assessment, the machine is in mint condition and can be inspected under power by appointment. - incl. various accessories Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Dsdpjzq Hknofx Alfswd Subject to technical changes, errors, and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, volume flow: 5,000 m³/h, intake manifold diameter: 250 mm, filter area: 15 m², Engine power, three-phase: 5.5 HP 3 collection bags Suction capacity: 5,000 m3/h Suction inlet diameter: Ø 250 mm Filter sleeves: no. 27 – Ø 180 x 1,030 Filter area: 15 m2 Inspection door Electric shaker Discharge outlet diameter: Ø 400 Noise level: 79.8 dB (A) Weight: 210 kg Dodpfx Alozyf Nnofewd Dimensions of assembled machine: 750 x 2,780 x 2,580 mm

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI Crane System as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,890 mm Support distance L: 5,590 mm Support distance B: 5,890 mm Beam length: 6,390 mm Overall dimensions of the system: approx. 6,590 x 6,590 mm UK crane bridge: 4,145 mm UK portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Rated current: 7.7 / 5.4 A FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Number of load chains: 2 Weight at 5 m lift: 65 kg Travel unit / Trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Conductor rail / Power supply Steel support and beam structure Documentation / Crane test book available Hoist test book available EC declaration of conformity (crane) available EC declaration of conformity (hoist) available Assembly and operating instructions available Accessories as shown in the pictures Dwjdpfx Aljzgv U Usfod Application areas Mechanical engineering Assembly work Production Maintenance Workshop operations Material handling Logistics Longest component: approx. 6.4 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam structure Control / Operating elements Main switch Documentation / Test book EC declarations of conformity Assembly and operating instructions Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to "see," allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) Dsdpjzg Eyaofx Alfewd (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, BÖLLHOFF Type: 9524-640-824-5 RIVSET Punch Rivet System with Punch Rivet Pliers Operating voltage: 400V 50 Hz Dedpjzgaabefx Alfjwd Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar max. permissible riveting force: 78 kN Weight of the pliers: approx. 279 kg Year of manufacture: 2012 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, DSM Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Fastening system Condition: used Dedszgabfjpfx Alfswd Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Djdpfjzgci Ejx Alfewd Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Dwodpfszgckcsx Alfod Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, 1 brand-new universal milling head system "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel plane system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling machines or panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Dwedpfjzdbxbsx Alfed DE - 44143 Dortmund-Wambel / Germany

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Dwjdpfxezd Rmgj Alfsd Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone. Dodpfxozdywzo Alfswd

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Dedpfjzd Tlljx Alfowd Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Dwodszd Ut Ropfx Alfed Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Sale only to business customers; no warranty. Equipment: - Calibration kit - Transport case - Mounting plate - 3 mm and 6 mm iProbes - USB cable - Power cord 230 V Dwodpfx Aljzxn E Njfed - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 - USB dongle, single-user license Please contact us if you have any questions.

Condition: new, ✅ Professional parts cleaning machine RESY – buy now at a great price! Are you looking for a powerful and robust parts cleaning machine for larger batches? Then our RESY series is just the thing for you! All models are made entirely of stainless steel – including the special pump. This new development offers the highest quality and durability for industry and trade. Available in three sizes: RESY 1250 – Rotating table 1150 mm – AVAILABLE FOR IMMEDIATE DELIVERY RESY 1500 – Rotating table 1350 mm RESY 1650 – Rotating table 1500 mm (Other sizes available upon request!) Features & Benefits: ✔️ Material: Stainless steel – corrosion-resistant & durable Dwsdpo Agnx Ajfx Alfod ✔️ Rotating table: 1150 / 1350 / 1500 mm, depending on the model ✔️ Spray capacity: 500 l/min ✔️ Spray working pressure: 2x 2 Hp (RESY 1250) or 2x 2.2 Hp (RESY 1500/1650) ✔️ Heating power: 2x 7.5 kW – fast heating ✔️ Temperature control up to 60 °C ✔️ Basket capacity: 300 kg ✔️ Programming of the working time ✔️ Loading trolley included ✔️ Glass window included (for RESY 1500 & 1650) or optional (for RESY 1250) ✔️ Voltage: 380 – 400 V ✔️ Weight without liquid: 400 kg (RESY 1250/1500) or 500 kg (RESY 1650) Perfect for: – Workshops – Industrial companies – Job shops – Maintenance Other systems available from us: ✅ Immersion tank ✅ Paint stripping tank ✅ Mobile extraction systems ✅ Washing systems ✅ Powder coating oven ✅ Spray booth ✅ Extraction system + make-up air system ✅ Mirroring technology Delivery & Warranty: Our parts washing systems are custom-made – delivery time approx. 7 – 14 working days. Delays may occur in case of high order volume. 1 year manufacturer's warranty included! Contact: Do you have any questions or would you like a customized offer? Our support team is available for you at any time! Request now – we look forward to hearing from you!

Condition: new, Year of construction: 2021, machine/vehicle number: 212288, Equipment: documentation/manual, type plate available, We offer this new GOM ATOS Q measuring system with a measuring volume of 270, manufactured in 2021. Manufacturer: GOM Model: ATOS Q Measuring volume: 270 Year of manufacture: 2021 Measuring volume 270 for ATOS Q Rotary/swivel head (Bento/Balsu) Column stand 1.8m with 0.9m cantilever Motorized rotary table – GOM ROT 350 Transport track on rollers with work surface Image processing computer 5820 Dodpfo Agv Irox Alfewd 24" TFT monitor with monitor case Dongle, external Condition: new If you have any questions or require further information, please feel free to send us a message or call us.