Used Coining Press for sale (27,624)

Year of construction: 2018, condition: ready for operation (used), This 8-axis Prima Power eP-0520 press brake was manufactured in 2018. It boasts a maximum tonnage of 550 and a distance between side frames of 2,100 mm. The machine features an O-frame design, enhancing its robustness and reliability. Ideal for precise bending with a stroke of 310 mm and high speeds on the X-axis (350 mm/s) and Z-axis (2,000 mm/s). A great opportunity to buy this Prima Power eP-0520 press brake. Contact us for more information. Application Types Dljdjx D Sd Tjpfx Ab Tsa Bending

Condition: reconditioned (used), controller manufacturer: BECKHOFF, CONTROLS .. PC controller BECKHOFF Offer for services of complete Overhaul of a Customer-Supplied Fineblanking Press FEINTOOL GKP 160 Scope of Overhaul • Complete disassembly into individual components • Inspection of all parts, including crack testing of critical components • Overhaul of the drive system, new motors • Reworking and precise alignment of all guideways • Complete overhaul of the hydraulic cylinders • Overhaul of the clamping tables • Installation of a new hydraulic unit • Renewal of the pneumatic system • Renewal of the electrical system Dlodsx D Ak Repfx Ab Tja Modernisation / Retrofit • Combined table • Servo feed systems • Central lubrication system • RAZIOL band lubrication • New brake/clutch unit • BECKHOFF PC-based control system with touch panel • PILZ safety control system • Implementation of CE conformity Notes • Special options and customer-specific extensions can be integrated upon request. • The images shown depict a reference machine. • The offer is based on the assumption that the essential mechanical components can be reconditioned and reused. In the event that new parts must be manufactured, additional costs will apply. A list of the components concerned and their cost will be defined in the service contract. Any affected parts will be presented to the customer for inspection and decision. We will be pleased to provide further information or answer any questions you may have.

Condition: good (used), Karl Tranklein ZP Combi hydraulic bookbinding press The device is ready to work. The press has a built-in hydraulic unit. Two independent stations. A single station surface: 325x440mm Irreplaceable in the bookbinding shop when producing books, blocks, etc. Dlsdpjwxtd Tefx Ab Tja The machine is equipped with photocells, additional safety features.

Condition: used, Used book press from print shop closure. Djdpfxex Dtbaj Ab Tsla

Condition: new, The KNWP 50 M is a top-of-the-line manual workshop press designed for various applications in the Workshop Presses category, particularly in the Manual Workshop Press group. Built in Europe, this robust hydraulic press is ideal for assembly, straightening work, and testing workpieces in mechanical workshops, garages, and locksmiths. Its features include a manually operated hydraulic pump with both hand and foot control, a rigid machine frame made from a carefully machined weldment structure, and adjustable table height for enhanced versatility. The 2-step hydraulics allow you to switch between quick-stroke and work stroke effortlessly. This 50-ton press simplifies tasks such as the removal and installation of bearings and bolt pressing while ensuring safe and professional operations. The included material support and multi-function die enhance productivity, making it an essential tool for professionals. For further inquiries and to explore your options, request a quote today. Djdpfx Aouyh Twjb Tjla

Year of construction: 1999, condition: good (used), Pneumatic press make SCHMIDT Type:ZHS-2/22 year 1999 Dlodpfxeiduvco Ab Toa with two-hand operation. UVV until 2023.

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 6600 kg Main Drive Dlsdpsx D Dxvefx Ab Toa Number of axis 8 Pressing force 1000 Kn This 8-axis AMADA HFE 3i 1003 press brake was manufactured in 2020, featuring a maximum press force of 1000 kN and a maximum stroke of 200 mm. It operates quietly at less than 70 dB and has a robust machine weight of 6600 kg. Consider the opportunity to buy this AMADA HFE 3i 1003 press brake. Contact us for more information. Application Types Bending

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t Dodpfx Abevzxtts Tjla dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Technical data: Dedpfxovac Hhj Ab Tela number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Year of construction: 2000, condition: good (used), 5.pcs in stock Price Applies to 1.pcs. Toggle press Fabr.SCHMIDT Druckl.3 KN. Dledpfsiduvgjx Ab Tsa

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm Djdpfx Ajvuk T Esb Tela speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m YOM 1978 - overhaul 1997 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: good (used), Durselen Corta PB-01 STE Automatic paper drill The device is in very good condition, ready to work. This is one of the newest Durselen models, the most advanced model. Production Germany. 6 drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system and lubrication. A programmer for controlling the table that allows you to approach programmed distances. Dledpfju Ul Hnox Ab Tsa Smooth regulation of spindle speeds and smooth regulation of the speed of lowering the heads. Waste disposal compressor Sliding column system on a tape. Technical data: Drill diameter: 2-10 mm, Stack height: 60 mm, weight: 400 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Solid construction on a pedestal. Waste is directed to the external pocket. The set includes operating tools, instructions, drills and sharpener.

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 930 mm Dlodpfxjvuk Trs Ab Toa stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication Dsdpfou Umcqsx Ab Tjla – additional safety covers – hard sheet metal for pressure

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm Dlodpfx Abevuk Sze Toa stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s working speed 320 mm/s oil volume 450 l power requirement 15,5 kW weight 8,0 t dimensions (WxDxH) 2,8 x 2,6 x 4,85 m hydraulic fast-stroke trimming press for die-cast parts with oilhydraulic drive, hydraulic shifting devices (4x), hydraulic blank holder in BDC / ejector in TDC in ram, ram interlocking device table surface 1340 x 705 mm or 930 x 1084 mm ram surface 1230 x 705 mm or 930 x 990 mm Insert plate in table with opening 320 x 260 mm as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Dljdpfx Abeu A Rr Ie Tja Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: used, Year of construction: 1987, Pressure 080 t throat 380 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 472 mm table surface area 840 x 610 mm table height over floor 800 mm passage to the back 520 mm ram surface 650 x 400 mm ram adjustment 70 mm power capacity 7,5 kW weight 6,9 t Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m Dedpfsvuk Snox Ab Tola permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, mechanical overload protection in ram, tie rods to improve rigidity of the press body, two-hand operation as is where is, WITHOUT electrical cabinet / WITHOUT additional work The putting into operation in our warehouse (with new control) / Safety adaptations / mechanical overhaul can be offered additionally on request

Condition: good (used), Nagel Citoborma 180 paper drill, pedestal The device is 100% functional. Like New. Very good condition. Solid construction – weight approx. 100 kg. This is one of the latest models of Citoborma drills, Power supply 230V. Dedpfx Asu Ul Huob Tela One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The drill table is adjustable in every plane (sides, front/back). It has stops for setting the drilling spacing. Additionally, the drill has an automatic table lock that is released after each cycle. The set includes drills, tools, a new column and instructions.

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Dodpfx Abex A Scge Tela Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Curt Beier B500 bookbinding press for backing Manufactured in Germany. Perfect condition. Dlodpowt Sugjfx Ab Tja Solid cast iron construction, strong pressure ensure precise operation. Jaw width 44cm Weight 40kg

Condition: good (used), Baier Geba Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. Description The Baier Geba hot stamping press is a press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manually operated pressure is powered by only 230V. A powerful pressure with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Heating temperature control Heating plate pressure mechanism: mechanical Press force: 5000 kg Power consumption: 9000 W Power supply: 230 V Dodoxmvbbepfx Ab Tsla Machine weight: 300 kg Plate size: 32 x 21 cm.

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Baldwin alcohol dampening Control panel Djdpovfukvsfx Ab Tsla Documentation and additional elements included.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press with joint forming Book press with groove burner. Machine in perfect condition, purchased from the national library. Practically unused. Produced by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air. Dedpfx Aswud Tdob Tsla

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Dljdpfx Aewud Tkob Tsa Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Nagel Citoborma 280 Paper Drill Dlsdpfjwunmusx Ab Tea The device is 100% functional. Very good condition. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the paper drill has an automatic table lock, which is released after each cycle. Factory condition – zero signs of wear. Solid construction – weight 76kg. 230V power supply. Two drilling heads. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been inspected. The set includes drills and tools, a new stick, and an instruction manual.