Used Cnc Vertical Turning Lathe for sale (20,380)

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Ncsdpfepiay Sex Ad Nel Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Condition: used, MAKE – TUSCAN MODEL – TL29 YEAR – 2002 CONTROL – FANUC OT TURRET – 8 POSITION WITH LOADS OF HOLDERS SWING OVER BED – 740 mm SWING OVER CROSS SLIDE – 420 mm CENTRE DISTANCE – 4000 mm SPINDLE BORE – 250 mm TRAVERSES – X-AXIS 500 mm/Z-AXIS 3700 mm SPEED – 15-700 RPM MOTOR – 3 SPEED GEARBOX MOTOR 30KW Ncsdpfx Aewmlcded Nel SWARF CONVEYOR 4 JAW CHUCK SWARF CONVEYOR

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Nodsrfx Tnepfx Ad Nscl Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Ncodpfx Ajycpw Aed Nol Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Nedpfxeycplme Ad Necl

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Njdjwzbq Tspfx Ad Njcl Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High-precision lathe DMG Mori Wasino G 100/480 Year of manufacture: 2017 Control: Fanuc COMPACT line Temperature response (at cold start): ø 2.0 μm Roundness: 0.5 μm Technical specifications: Njdpfsvi Ifzsx Ad Njcl Spindle speed: Drive power: Turning diameter: 285 mm Turning length: 280 mm Bar capacity: 38 mm Travel paths: X-axis: 480 mm Z-axis: 285 mm Accessories - 3 live tools - Rigid tool holder package - Fire extinguishing system - Machine has only been run under oil - Chip conveyor

Condition: excellent (used), Year of construction: 2017, operating hours: 20,000 h, functionality: fully functional, spindle speed (max.): 6,500 rpm, bar passage: 42 mm, bar diameter (max.): 42 mm, Production lathe Gildemeister Sprint 42 - 8 linear axes with high-pressure system and Iemca bar feeder Year of manufacture: 2017 Control: Fanuc 31i Operating hours: ~20,000h Version with 8 axes – linear drive on X1 axis Main and counter spindle speed: 6,500 rpm Njdoxbpp Uspfx Ad Nocl Max. bar capacity: 42mm Coolant system: Slide 1: 8 bar Slide 2 + Y: 20 bar Bar feeder: Iemca BOSS 552/32 Parts conveyor belt

Condition: ready for operation (used), controller model: Siemens 840 T, empty load weight: 15,000 kg, swing diameter over cross slide: 430 mm, Dubbelspindel CNC-draaibank met hoog vermogen, ideaal voor flenzen en tandwielen. Uitgerust met duplex werkstuk Laad- en losrobot. Max. werkstukgrootte: Ø 355 x 430 mm Vermogen op beide spindels: elk 35 kW Snelheid: max 2500 tpm Type: FR 23Q-2 CNC Duitse kwaliteit Swing over bed: Ø 355 mm Max longitudinal travel Z-axis: 250 mm Power on the spindle: 35 kW Number of speeds: max 2500 rpm Toolchanger: yes Number of tools: 2 x 8 positions Ncjdpfeycmp Aox Ad Nel

Condition: excellent (used), Year of construction: 2007, operating hours: 24,993 h, functionality: fully functional, I am offering the following machines for sale: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Ultrasonic cleaning system – 2015 Mollart Drillsprint – Gun drilling / Deep hole drilling machine – 1996 Traub TNL 26 – CNC Swiss-type automatic lathe – 2004 Traub TNL 26 – CNC Swiss-type automatic lathe – 2007 Traub TNL 26 – CNC Swiss-type automatic lathe – 2009 Traub TNL 18 – CNC Swiss-type automatic lathe – 2013 Traub TNL 18 – CNC Swiss-type automatic lathe – 2014 Star SV-20R – CNC Swiss-type automatic lathe – 2019 Traub TNL18-9P – CNC Swiss-type automatic lathe – 2015 Traub TNL18 – CNC Swiss-type automatic lathe – 2014 Traub TNL18-9 – CNC Swiss-type automatic lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Schleifbock DP07 – Grinding & polishing (implants) – 1986 Rösler RWT 1000-I Rotary Table Blasting Machine – Blasting cabinet – 2012 Bending Machine C 202 M – Bending machine – 1990 Schmidt Hydro-pneumatic Press – Hydro-pneumatic press – 2021 TRAUB TNL 26 – CNC Swiss/short part automatic lathe General Model: TNL 26 Year of manufacture: 2007 Control: TRAUB TX8i Ncodpfjycl Uwox Ad Nel Condition: used, operational Operating hours (under power): 33,905 h Kinematics & Configuration Number of axes: 13 Number of spindles: 2 Number of turrets: 2 Front attachment: yes Counter-operation: yes Main spindle Max. bar diameter: 26 mm Max. machining length: 225 mm Z travel: 250 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Sub spindle Max. bar diameter: 26 mm Z travel: 250 mm X travel: 370 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Tooling systems Upper turret Stations: 12 Live tooling positions: 12 Travel: X: 50 mm Z: 100 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Lower turret Stations: 12 Live tooling positions: yes Travel: X/Z: 50 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Front attachment Stations: 5 Live tooling positions: 4 Travel X/Z: 370 / 250 mm Driven tools: up to 6,000 rpm Counter-operation Stations: 5 Live tooling positions: 4 Travel: X: 73 mm Y: ±50 mm Driven tools: up to 6,000 rpm Cooling & Peripheral Equipment Coolant tank: included High-pressure coolant system: 70 bar Chip conveyor: included Workpiece conveyor: included Part removal and ejector: included Driven guide bushing: yes Bar feeder: included Electrical Data Supply voltage: 400 V Total connected load: 33 kW Dimensions & Weight Footprint: 3,706 × 1,292 mm Machine height: 1,630 mm Machine weight: approx. 4,000 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, TRAUB TNL 18 – CNC Swiss-Type & Short-Turn Lathe Ex Works, previously used in medical technology, rejection rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, productive in current use Included: High-pressure coolant system (KSS) + bar feeder Spindles & Machining Main spindle: motor spindle Max. bar capacity main spindle: 18 mm (optionally 20 mm) Max. main spindle speed: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter spindle: available Max. bar capacity counter spindle: 18 mm Max. counter spindle speed: 12,000 rpm C-axis counter spindle: yes Ncedpfx Asycl Uded Nsl Tooling System Upper turret: 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Rear tooling device: 7 stations Max. simultaneous tools in cut: 3 Tool capacity: Standard: 22 Maximum (with multiple holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Large travel ranges for Swiss-type and short-turn operation Simultaneous machining with main and counter spindle: yes Coolant & High-Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High-pressure (option, included): up to 20 bar Flow rate: approx. 28 l/min Filtration fineness: 50 μm Electrical Data Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Max. fuse protection: 63 A Rated power: 35 kW Connection load: 24 kVA Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (listing short text) TRAUB TNL 18, year 2013 CNC Swiss-type & short-turn lathe Main and counter spindles 2 turrets + rear tooling device High-pressure coolant included Bar feeder included Very rigid production machine Rejection rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine / Deep hole drilling – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Grinding bench DP07 – Grinding & polishing (implants) – 1986 Turntable blasting unit Rösler RWT 1000-I – Blasting cabin – 2012 Bending machine C 202 M – Bending – 1990 Schmidt hydro-pneumatic press – Press / hydro-pneumatic press – 2021

Year of construction: 2022, condition: used, machine/vehicle number: 710370, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Nedpfsx Akkvsx Ad Nocl

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Ncjdpox Aki Eofx Ad Nol

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Ncsdpfsx Akixjx Ad Njl

Year of construction: 2015, operating hours: 18,025 h, condition: used, machine/vehicle number: 0031000248A, Stock No.: 394600, travel X/Z: 267, 5x600 mm, max. turning diameter: 400 mm, max. spindle speed: 4,000 rpm, net weight: approx. 5,200 kg, dimensions LxWxH: approx. 410x183(252)x190 cm, control: SIEMENS Sinumerik 840D sl, with SCHUNK 3-jaw chuck, 12-position tool turret, chip conveyor, steel cabinet, double-door, contents: various tool holders, approx. 60 pieces, partially equipped Njdpfx Adeyciuzo Nscl

Year of construction: 2014, condition: used, machine/vehicle number: 239319, recorded operating hours: 14,765 (as of 08/25), weight: 6,760 kg, 12-position tool changer, MAZATROL Smart control, lubricant processing system, chip conveyor, spindle stroke: 1,300 mm, max. machining diameter: 380 mm, SMW K3-ZSW steady rest, ATTENTION: Collection of this item only by prior arrangement!!! Nedpsycitdjfx Ad Nscl

Condition: used, Year of construction: 2018, operating hours: 12,678 h, machine/vehicle number: 290060, Weight: 16,800 kg, 48-position tool changer, travel paths (x/y(z): 4 mm, with lubricant processing, chip conveyor, cooling unit, control cabinet. ATTENTION: Collection for this item by prior arrangement only!!! Nedpfxoycitks Ad Njcl

Condition: used, Year of construction: 2007, machine/vehicle number: 195125, Weight: 5,040 kg, MAZATROL Matrix control, chip conveyor, tool changer, max. tool length: 210 mm, ATTENTION: Collection of this item only by prior arrangement!!! Njdeyciryjpfx Ad Nscl

Condition: used, Year of construction: 2006, machine/vehicle number: 184628, Weight: 7,100 kg, 30-position tool changer, movable T-slot clamping table, MAZATROL 640M control, travel (x/y/z): 1 mm, lubricant processing system, chip conveyor, control cabinet, without machine vises, ATTENTION: Collection for this item only by prior arrangement!!! Ncsdpfx Ajycir Tjd Nel

Year of construction: 2021, operating hours: 9,159 h, condition: used, machine/vehicle number: 374-19, the documentation is attached as a PDF Ncedpfjyciu Isx Ad Nsl

Year of construction: 2021, operating hours: 16,807 h, condition: used, machine/vehicle number: 374-20, the documentation is attached as a PDF Nsdeyciu Uepfx Ad Nocl

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Nedpfxsxf Iams Ad Nocl Some accesories and machine equipement are also available. More specs of the machine, check last two pictures.

Condition: good (used), Year of construction: 2010, AWEA 1250, Ncodpfx Ajxu Ew Ued Nsl 15.000 rpm coolant thru spindle, Tool changer 40 places Parts shown by hand not come. Machine vices, plate on table not come with machine.

Year of construction: 2018, condition: excellent (used), Hardly used at all. Installation dimensions (L,W,H) mm: 7,023 x 3,337 x 2,480 Weight: 16 t Working area Centre distance: 3,000 mm Cross slide diameter: 650 mm Bed diameter: 700 mm X-axis travel: -15 ... +335 mm Ncjdpfsychzmox Ad Nsl Machine equipment A11 main spindle, 2,000 rpm, 1,200 Nm (100%) Tailstock MK5, dragged 12 x KM40 tool holders Loading hatch for automatic loading & unloading 400V, 50Hz

Condition: new, Year of construction: 2025, The machine on offer is a new stock machine. We will be happy to provide you with a suitable quotation. Njdpfx Adjychtps Njcl