Used Cnc Tool Grinding Machine for sale (65,986)

Year of construction: 2014, condition: ready for operation (used), A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible. Codsv Suftopfx Akcogt

Year of construction: 2016, condition: ready for operation (used), Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm. Cgsdpfx Akev T Aqgocot

Year of construction: 1995, condition: ready for operation (used), A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible. Codpfsw H Attex Akcjgt

Condition: ready for operation (used), Year of construction: 2015, A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power. Cgsdex Dm Dzjpfx Akcet

Year of construction: 1994, condition: ready for operation (used), Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible. Csdpfjyf I Hbex Akcogt

Year of construction: 1986, condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible. Cgjdpfx Aewkihxekcet

Year of construction: 1990, condition: ready for operation (used), Workpiece diameter range: 2mm-320mm, max. grinding length: 500mm, center distance: 1000mm, max. workpiece weight: 150kg. On-site inspection is possible. Cgsdpfx Akjwmqxwscjt

Year of construction: 1994, condition: ready for operation (used), Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible. Codpfev Exrqsx Akcsgt

Year of construction: 1996, condition: ready for operation (used), Center height: 150mm, max. grinding diameter: 300mm, distance between centers: 620mm, max. workpiece weight: 120kg, grinding head spindle swivel range: +45°/-15°, table adjustment: +/-8.5°, travel X/Z: 160mm/756mm, grinding wheel dimensions X/Y/Z: 400mm/63mm/127mm, grinding wheel speed: 45m/s, workpiece spindle speed: 700rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1850mm, weight: approx. 3000kg. Including LTA extraction system and SBS wheel balancing device. The workpiece drive is disassembled and its completeness is unknown. Documentation available. An on-site inspection is possible. Cgedsxvdd Aepfx Akcst

Year of construction: 2013, condition: ready for operation (used), A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Csdpfxswxxwrj Akcjgt

Year of construction: 2009, condition: ready for operation (used), A Junker CNC cylindrical grinding machine overhauled in 2019 is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, orbital diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions X/Y/Z: approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control: Siemens Sinumerik. Including BKW chiller, Knoll VL 1000/4000 cooling lubricant system with 6500l container and Hyfra industrial recooler. Documentation available. On-site inspection is possible. Cgjdpfx Akswtg Eyocjt

Year of construction: 2012, condition: ready for operation (used), A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible. Cgjdju Nlk Sjpfx Akcjt

Year of construction: 2013, condition: ready for operation (used), A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible. Codpfewwllgjx Akcjgt

Year of construction: 1996, condition: ready for operation (used), Sanding length: 650mm, max. sanding diameter: 508mm, center height: 125mm, workhead speed: 1500rpm, max. workpiece weight: 30kg, workpiece swivel range: 30°-90°, tailstock: MK3. Grinding wheel diameter: 508mm, grinding wheel width: 40mm, bore: 203mm, max. internal grinding diameter: 150mm. Machine dimensions X/Y/Z: approx. 4300mm/3100mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik 820G. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025. Codpjuku Smefx Akcjgt

Year of construction: 1999, condition: ready for operation (used), Center height: 175mm, grinding length: 650mm, B-axis: -15°/195°, workpiece speed: 1750rpm, grinding wheels T1/T2: 500mm/400mm, bore: 203mm, max. workpiece weight: 80kg, workhead: MK4, tailstock: MK3. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/2100mm, weight: approx. 4000kg, operating hours: 56300h, control: GE Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025. Cjdpfsuku Sysx Akcegt

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Cgjdpfxsxfknaj Akcjt

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Csdpfjxf Ikfox Akcegt

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Cjdpfox Uq T Dox Akcogt

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Cedpfx Aksxwcu Ascegt

Year of construction: 1980, condition: ready for operation (used), A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible. Csdjw Dfg Rjpfx Akcogt

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice Cgjdpfxsl Dvx Ee Akcst 19 tool holders Coolant

Condition: good (used), Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 Cgedpfxoxfhche Akcot -Parting head: rotatable/tiltable -Mounting/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg

Condition: good (used), Tool grinding machine, grinding machine, angle grinding machine, turning steel grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheels: Ø 170 mm, speed 3000 rpm -max. steel cross section: 80 x 80 mm Cgsdpefmm A Eefx Akcot -Dimensions: 1300/900/H1450 mm -Weight: 500 kg

Condition: good (used), Tool grinding machine, grinding machine, angle grinding machine, rotary steel grinding machine, steel grinding machine -Grinding places: 4 -Angle tables on swing tables: 3 -Angle table for chip breaker groove: 1 Cgjdjdv T Tbopfx Akcot -Quantity: 1 piece available -Dimensions: 1210/1210/H1450 mm -Weight: 536 kg

Condition: good (used), Year of construction: 1964, Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder -Manufacturer: Wilhelm Simon, 2-station tool grinding machine -Motor power: 1 kW -Speed: 2800 rpm Cgedpfshmlhvsx Akcet -Grinding discs: Ø max. 150 mm -Coolant system: Pump missing, can be replaced for an additional charge -Dimensions: 1430/780/H1380 mm -Weight: 456 kg