Used Cnc Lathe With Y Axis for sale (28,185)

Year of construction: 1995, condition: ready for operation (used), Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016. Kodpfx Astdwwmjpmsna

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Kodpfswmqx Dox Apmsna

Year of construction: 2008, condition: ready for operation (used), Turning diameter over bed/cross slide: 500mm/280mm, max. workpiece length: 1500mm, travel X/Z: 280mm/1430mm, spindle bore: 82mm, speed: 2200rpm, rapid traverse X/Z: 6m/10m/min, quill diameter: 75mm, quill stroke: 150mm, bed width: 400mm, chuck diameter: 250mm. Machine dimensions X/Y/Z: approx. 3350mm/1750mm/1650mm, weight: approx. 2700kg, control: Fanuc Series 0i Mate-TC. Documentation available. On-site inspection is possible. Kodpfx Aewynv Tepmena

Condition: ready for operation (used), A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible. Knodpfxevu Ddws Apmoa

Year of construction: 1992, condition: ready for operation (used), Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025. Knedeu D H Hwspfx Apmja

Condition: ready for operation (used), Offered is a Traub TND 400. Center distance: 800mm, turning diameter approx. 250mm, travel X/Y approx. 220mm/850mm, spindle bore: 65mm, speed range: 40-4000rpm, 12-position disc turret, tool holder: VDI40 DIN69880, integrated coolant system, dimensions X/Y/Z approx. 3000mm/2000mm/2000mm, weight approx. 4300kg-4500kg. Inspection by appointment possible. Kjdpfxeykutxo Apmsna

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Knedpfsza E Sqex Apmoa

Condition: ready for operation (used), Year of construction: 2009, Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible. Knsdpfoylziiex Apmsa

Year of construction: 2004, condition: ready for operation (used), Two identical Index CNC lathes including peripheral equipment and accessories are available. Main spindle: D90/Size 8, max. main spindle bore: 90mm, max. workpiece diameter: 340mm, max. workpiece length: 450mm, max. workpiece weight: 100kg, speed: 4200rpm, power: 35.5kW, torque: 550Nm, front bearing diameter: 140mm, clamping stroke: 32mm, clamping pressure: 80bar, travel X/Z: 1500mm/340mm, rapid traverse: 30m/min, feed force: 8kN, tool stations 1/2: 10/10, mounting plate dimensions X/Y: 300mm/490mm. Including coolant system, tool holders, clamping equipment and angle toolholders. Documentation available. An on-site inspection is possible. Expected to be available from autumn 2026. Individual sale possible. Knodpezkld Tsfx Apmea

Year of construction: 2005, condition: ready for operation (used), A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement. Knedpjx I Rpxofx Apmsa

Year of construction: 2008, condition: ready for operation (used), Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls smaller 120mm and CNC singulation for balls larger 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement. Ksdpfxex Th Nme Apmona

Year of construction: 2006, condition: ready for operation (used), A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible. Ksdpfjyvuvxjx Apmjna

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Knodpfx Asxmkcajpmoa

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Kodpfey Uyf Nsx Apmena

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Kjdjy U Nqnjpfx Apmsna

Year of construction: 2011, condition: ready for operation (used), Swing diameter over bed/facing slide: 330mm/260mm, max. turning diameter: 200mm, max. turning length: 450mm, travel X/Z: 160mm/450mm, rapid traverse: 30m/min, speed: 5000rpm, tool stations: 12, tool holder: VDI30, max. workpiece weight: 100kg. Machine dimensions X/Y/Z: approx. 3300mm/1750mm/2400mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible. Ksdpfezdkphsx Apmjna

Year of construction: 2016, condition: ready for operation (used), Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible. Kjdpfx Apjyx H E Romjna

Year of construction: 2009, condition: ready for operation (used), A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible. Kedpfx Apeyypliomena

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Knodpfx Aoxq Eyujpmja

Year of construction: 1996, condition: ready for operation (used), Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Expected to be available starting February 2027. Knedpfx Apey Ulniemsa

Year of construction: 2003, condition: ready for operation (used), Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. Kodstdwwqjpfx Apmona

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Kjdsv Scrhspfx Apmena

Year of construction: 2017, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 4600mm, width: 1600mm, height: 2700mm, weight: 2.1t, operating hours: 34,536h. With automation FMB Unirobot LR MATE 200iD7L-P2TB, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, belt filter Knoll KF110/500, hinged belt conveyor 320 S1 and other accessories. On-site inspection is possible. Kjdpfsv Uz Akex Apmsna

Year of construction: 1995, condition: ready for operation (used), A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible. Kjdpfsym Dgmsx Apmona

Year of construction: 2009, condition: ready for operation (used), Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible. Knsdpfxsv Dkb Io Apmja