Used Cnc Center Lathe for sale (21,935)

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm Fgedpfxjzlbp Uo Akyjh - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, Year of construction: 1997, CNC lathe, cycle-controlled Manufacturer: VDF Boehringer Type: DUS 560 Year of manufacture: 1997 Control: CNC Plus Swinging diameter over bed max.: 570 mm Turning length: 1,000 mm Spindle head size 8 according to DIN 55027 Tool cross-section H/W max.: 32 x 25 mm Thread pitch: 0.1 – 400 mm Spindle speed: Gear stage 1: Speed range from 3 to 500, infinitely variable Gear stage 2: Speed range from 15 to 2,500, infinitely variable Speed: Main drive: 8,000 min⁻¹ Feed drive X: 2,000 min⁻¹ Feed drive Z: 2,000 min⁻¹ Tailstock: Arbor taper: MK 5 Tailstock movement by hand Feed rate: longitudinal max.: 10 m/min radial max.: 5 m/min automatic feeds: longitudinal + radial 0.01 – 50 Feed force max.: longitudinal 12.5 kN Main drive: 50/21 kW Voltage: 400 V / 50 Hz Total connected load: 50 kVA Accessories: Fgedpfxez N Ew Nj Akyjh Coolant pump Brinkmann 47 l/min at 0.2 bar Manual chuck Forkardt F 250 Parat quick-change tool holder Weight approx.: 4,000 kg Space requirement L/W/H: 3,150 x 1,800 x 1,800 mm 91026

Condition: used, Year of construction: 1991, CNC turning machine HEYLIGENSTAEDT HEYNUMAT 24U/1500 with C-axis Year of manufacture: 1991 Fjdpfsz I Syasx Akyjgh CNC control: SIEMENS 3T Spindle speed range: 9–2,240 rpm, 2 gear stages 3-jaw chuck: • FORKARDT 3NHF-400-120, Ø 400 mm • FORKARDT KS 500, Ø 500 mm Steady rest: SMW SLK Tool turret: TWS • Shank size: 60 mm • 12 tool stations Tailstock: • Quill diameter: Ø 160 mm • Quill stroke: 160 mm Chip conveyor: MAYFRAN Swinging diameter: • over bed: Ø 900 mm • over cross slide: Ø 800/770 mm Main drive power: 55/75 kW Machine weight: approx. 12,000 kg Robust and powerful CNC turning machine with SIEMENS 3T control, large spindle speed range and high drive power. Equipped with FORKARDT chucks, TWS tool turret, SMW steady rest and MAYFRAN chip conveyor. Machine data sheet with equipment & technical data – see PDF. All technical specifications, illustrations and content are non-binding and without warranty. Subject to change and errors. All other accessories visible in the photos and video are not included in the scope of supply and are therefore not part of this sale. The scope of supply only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free Carrier) D-92729 Weiherhammer including disassembly, removal and loading onto the truck Delivery time: immediately Subject to prior sale / payment immediately upon completion of purchase

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, turning length: 1,073 mm, turning diameter: 380 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 1,100 mm, bar passage: 81 mm, total height: 1,960 mm, total length: 3,805 mm, total width: 2,100 mm, overall weight: 5,800 kg, Equipment: documentation/manual, Hyundai WIA SE2600LSY is a high-performance CNC turning centre equipped with a Y-axis and sub-spindle for complete machining of complex components in a single setup. The machine features a FANUC i-Series control, BMT55 live tooling with speeds up to 6,000 rpm, and a maximum turning diameter of 380 mm. It is equipped with a 10" main spindle and 6" sub-spindle, providing excellent flexibility for both turning and milling operations. Optional equipment included: Automatic tool setter 15 bar high-pressure coolant pump Chip conveyor with chip container Bar feeder interface Parts catcher Standard set of tool holders, including 2 + 2 live tool holders Fjdpfx Aoz Izngekyogh

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm Fgjdpfx Akszr Hgxeyjh turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: used, Year of construction: 2022, control SIEMENS Sinumerik 828D turning diameter 288 mm working lenght 243 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. Fgsdpfx Aez Nqbyokyjh x-axis 175 mm z-axis 350 mm weight approx. ca. 3.100 kg Condition: Used Technical features & accessories: - AFS filtration system - MR NS2000 chip conveyor - SAMSYS M3000 bar loader Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 600 mm, turning diameter: 324 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, GILDEMEISTER CTX 420 linear V3 Year of manufacture: 2003 Control system: Heidenhain Plus IT / DataPilot Machine type: CNC turning machine Design: C-axis and driven tools Working area: Swinging diameter over bed: 680 mm Swinging diameter over cross slide: 565 mm Max. turning diameter: 324 mm Max. turning length: approx. 600–635 mm Travel in X-axis: 260 mm Travel in Z-axis: 635 mm Main spindle: Speed range: 20–5,000 rpm Drive power: 37 / 25 kW Max. torque: approx. 390 / 270 Nm Bar diameter: approx. 65 mm Spindle bore: approx. 79 mm Tool turret: 12-position Sauter tool turret Tool holder: VDI 30 Driven tool stations: up to 12 Speed of driven tools: up to approx. 4,500 rpm Power of tool drive: approx. 12.2 kW C-axis: C-axis available Rapid traverse rates: Rapid traverse rate X-axis: up to 60 m/min Rapid traverse rate Z-axis: up to 45 m/min Tailstock: Fgedjz Iqc Hspfx Akyoh Tailstock available Arbor mounting: MK 5 Tailstock travel: approx. 580 mm Machine data: Machine weight: approx. 6,000–6,500 kg Dimensions L x W x H: approx. 3,500 x 2,460 x 2,100 mm Typical equipment: Driven tools C-axis 12-position turret Tailstock Chip conveyor Coolant system

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC control Fanuc Oi-TC 12-fold revolver driven tools C-axis chip conveyor tail stock coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 260 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 51 mm Fgodpfxsz Nwtvj Akyjh Drehzahl / spindle speed 4500 UpM /rpm Drehzahl angetr. WKZ /speed of driven tools 5000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Eilgang Z / rapid feed Z 36 m/min. Gewicht der Maschine ca. / weight ca. 3280 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min Fgodpfx Akswtct Heyeh max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed *

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Spindle hours: approx. 37,695 h Max. spindle speed: 5,000 rpm Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Fjdpfx Aez Nxcxekysgh Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Inspection and functional testing possible by appointment Price net. VAT can be shown separately.

Condition: refurbished (used), functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 90 mm, turning diameter: 630 mm, turning length: 3,000 mm, quill stroke: 200 mm, total length: 4,700 mm, total width: 1,420 mm, total height: 1,650 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 18 rpm, type of input current: AC, overall weight: 3,600 kg, workpiece weight (max.): 1,500 kg, Lathe FAT TUR 630 x 3000 mm - Fully Overhauled (Like New Condition) For sale is a conventional universal lathe, FAT TUR 630M x 3000, which has undergone a complete overhaul. The machine is in technically and visually like-new condition and meets the highest precision standards. Work performed during the overhaul: • Bed & Guides: All guide rails of the machine bed were precisely ground. The support guides were re-aligned and scraped. • Bearings: Complete replacement of all bearings. • Mechanics: All gearbox housings were cleaned, gears were inspected, and seals were renewed. • Electrical System: Fully refurbished. • Geometry: The machine was leveled and checked according to the acceptance protocol (as per factory standards). • Appearance: Industrial coating RALK 6011. Technical Specifications: Conventional Lathe TUR 630 Main Parameters / Working Range • Turning diameter over bed: 630 mm • Turning diameter over cross slide: 380 mm • Distance between centers: 3,000 mm • Bed width: 433 mm • Max. workpiece weight between centers: 1,500 kg Headstock / Spindle Fjdpfsz Izdbox Akyegh • Spindle bore: 90 mm • Spindle speed range: 18 – 1,800 rpm • Number of speed steps: 21 • Spindle nose: DIN 55027 - No. 8 Tailstock • Tailstock spindle diameter: 90 mm • Tailstock quill stroke: 200 mm • Tailstock quill internal taper: Morse taper MK 5 Drive / Motor • Main motor power: 15 kW Feeds and Threads • Range of longitudinal feeds: 0.08 – 3.25 mm/rev • Range of transverse feeds: 0.04 – 1.62 mm/rev • Number of feed ranges (each): 42 • Rapid traverse – longitudinal: 4 m/min • Rapid traverse – transverse: 2 m/min Thread cutting range • Metric threads: 1 – 120 mm • Inch threads (Whitworth): 28 – 1/4 G/inch • Module threads: 0.25 – 30 mm • DP threads (Diametral Pitch): 112 – 1 DP _____ Dimensions and Weight (for length 3000 mm) • Machine weight (approx.): 3,600 kg • Dimensions (L x W x H): approx. 4,700 mm x 1,420 mm x 1,650 mm _____ The machine is ready for immediate use and can be inspected and tested under power at our location in Hilden. Delivery conditions: • Transport is not included in the price. • Loading onto your truck is included in the price. Delivery date: • Available immediately after agreement. Price: €36,500 plus VAT (net, ex works Hilden) Subject to prior sale. Please do not hesitate to contact us if you have any questions.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: A2000006, CNC machining center for aluminum window profiles, Fom Industrie FMC 475, with 5 controlled axes and a 7 m working length, manufactured in 2026. Options: Cut & Separate module with a mechanical keyboard and printer, 300 mm saw blade, barcode scanner with data import, UPS, and tool set A2 / HSK F63. Fodpfez Nghpox Akysgh

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Fjdpsz N E Aljfx Akyegh Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), With C-axis, with driven tools MAZAK Mazatrol 640T control Turning length -982 mm Swing Diameter -610 mm Turning diametre 264 mm Spindle speeds - 4'000 rpm Tool changer with 12 driven positions Misc. accessories Fodpfx Aju R Nd Eekyegh MARCELS MASCHINEN CH

Condition: good (used), functionality: fully functional, + Multifix "A" baseplate + Three-jaw chuck + Collets + Coolant pump Fedpfxoz Hatlo Akysgh Center height approx. 150mm Swinging diameter over support 160mm Swinging diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 RPM Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (LxWxH): 150 x 70 x 150cm Weight: 600Kg

Condition: excellent (used), Year of construction: 2012, Description Specification Manufacturer TATUNG-OKUMA Model GENOS L300E-M Manufacturing Date 30 January 2012 Serial Number PEA258 CNC Control OKUMA OSP P200LA-R MCS3 Machine Type CNC Turning Centre with Driven Tools CE Declaration of Conformity Available Tool Turret 12 Stations Tailstock Included Parts Catcher Listed in machine documentation Bar Feeder Interface Listed in machine documentation 2. Machining Capacity Description Specification Maximum Turning Diameter Ø300 mm Maximum Turning Length 1,060 mm Maximum Swing Over Bed Ø520 mm X-Axis Travel 235 mm Fedpfoz Nyvtex Akyjgh Z-Axis Travel 1,144 mm Main Spindle Speed 30–3,000 rpm Spindle Nose A2-8 Main Spindle Motor Power 11 / 7.5 kW (30 min / continuous) 3. Turret and Driven Tools Description Specification Tool Turret 12 Stations Turret Type M-V12 Driven Tool Capability Yes Driven Tool Speed 45–4,500 rpm Driven Tool Motor Power 7 / 3.3 kW C-Axis 360° C-Axis Indexing Resolution 0.001° 4. Equipment and Features - OKUMA OSP P200LA-R CNC control system - 12-station tool turret - Driven tooling capability for milling and drilling operations - C-axis positioning - Tailstock - Parts catcher (indicated in documentation)

Condition: used, Year of construction: 1999, turning diameter 186 mm turning length 350 mm control FANUC O/T turning speeds 4.000 U/min spindle bore 61,0 mm tool holder 12 Stück chucking diameter 170 mm total power requirement 7,5 kW weight of the machine ca. 2,4 t - FANUC - CNC control - SMB 600 bar feeder with magazine - Chip conveyor Fgodpoz N Hxbofx Akyjh - 3-jaw lathe chuck, 170 mm - MK 4 tailstock - Various tool holders - Cooling system - Full enclosure

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL MAX TURNING DIA 350 MM MAX TURNING LENGHT 400 Fgedpjz N Dflofx Akysh 250 MM HYD 3 JAW CHUCK TAILSTOCK SLOTTED TURRET YEAR 2007 TOOL SETTER

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 470 mm, spindle bore: 150 mm, turning diameter over bed slide: 750 mm, turning diameter over top slide: 470 mm, feed length Z-axis: 2,000 mm, spindle speed (max.): 1,030 rpm, Center height on the machine bed: 360 mm Width of the machine bed: 450 mm Width of the recess: 450 mm Maximum turning diameter on the machine bed: 750 mm Maximum turning diameter on the recess: 910 mm Fgedpfx Akez Irayjyoh Maximum turning diameter on the carriage: 470 mm Spindle bore diameter: 150 mm

Condition: excellent (used), Tacchi HD/1450 X 4M Large Spindle Bore (515mm) Year 2002 Fjdpfx Akjxg Ivdeyjgh Siemens CNC Control Swing over bed 1450mm Swing over saddle 1000mm Hollow spindle 515mm Chucks front and rear of Headstock Speed range 1.5 – 450 rpm 15,000kg weight between centres Baruffaldi 4 way Auto Toolpost 2 x 3 point steadies

Condition: used, Year of construction: 2017, functionality: fully functional, X-axis (planar travel): 195 mm (approx. 7.67 inches) Z-axis (longitudinal travel): 400–430 mm Fsdpfxoz Hwais Akyogh Tailstock travel / quill travel: 100 mm (quill stroke) Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min C-axis (spindle indexing): 0.001° (for driven tools / MC version) Center height: 1,000 mm Max. spindle speed: 3,500 rpm Max. chuck diameter: 10 inches Max. chuck speed: 4,200 rpm Max. working area (diameter x length): Ø 325 mm x 302 mm Machine weight: 4,350 kg Operating voltage: 3 PE / 220 V (AC) Rated frequency: 50 Hz Electrical connections / power: 30 kVA Rated current: 100 A Short-circuit current strength: 5 kA Largest motor: 80 A Circuit breaker capacity: 100 A Switching capacity of protective device: 50 kA Compressed air supply: 0.5 MPa (5 bar)

Condition: excellent (used), SCHIESS HoriTurn 4080 MY CNC Turning Center - Max. turning diameter: 400 mm - Max. distance between centers: 800 mm - Max. load between centers: 800 kg - Max. workpiece weight without support: 200 kg - Axis X / Y / Z travel: 305 / 100 / 900 mm - Rapid traverse X / Y / Z: 20 / 10 / 25 m/min - Axis X / Y / Z acceleration: 5 / 2 / 5 m/s² - Max. spindle speed: 4000 rpm - Torque: 403 Nm - Rated spindle motor power: 13 kW - Swing over bed: 780 mm - Swing over chuck: 410 mm - Tool interface: BMT-65 - Number of tools: 12 - Number of driven tools: 12 Fsdjz Ha Nyepfx Akyegh

Condition: excellent (used), Year of construction: 2024, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL MACH-ID 9822 Make: QuickTech Type: T6 MILL Control: Mitsubishi Touch YOP: 2024 Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Pinole taper: 4Mk Fgjdpfx Aksz H I Haeyeh Stroke pinole: 70mm Quill Ø: 32mm Length: 2500mm Width: 1300mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), functionality: fully functional, turning diameter: 200 mm, rotational speed (max.): 6,000 rpm, Control system: Siemens 840 Dsl General Bar diameter (HS): 60 mm Bar diameter (GS): 60 mm Milling spindle Milling spindle: HSK D-50 Tool holder I (X/Y/Z/B) Technology: Tool turret with 14 stations Tool holder: HSK D-50 Tool drive: 6,000 rpm X-axis: 155 mm Y-axis: +/- 60 mm Z-axis: 590 mm B-axis: 360° swiveling Tool holder II (X/Z) Technology: Tool turret with 14 stations Tool holder: VDI 25 W-shank Tool drive: 6,000 rpm Fgjdpfxsz Ip Ius Akyjh X-axis: 105 mm Z-axis: 400 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Switchable coolant pump, 8/80 bar Bar loader: UNIMAG interface Control function: “Guide unit” for cross slide 2 Warranty: 12 months

Condition: good (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 400 mm, turning length: 500 mm, turning diameter: 280 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, Well-maintained SPINNER TC400 CNC lathe manufactured in 2012 and equipped with Siemens Sinumerik 840D ShopTurn control. The machine is in good technical condition, regularly serviced and ready for immediate operation. Fgsdpfx Ajzarxwskyeh This machine is equipped with a tailstock and is ideal for the machining of shafts, flanges and precision turned components. Its rigid construction and reliable Siemens control system ensure excellent machining accuracy and productivity. The machine can be inspected under power by prior arrangement.