Used Cloos Glc 503 Quinto for sale (52)

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Itjdpfx Aetkuk Reffjr

Condition: excellent (used), Year of construction: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine Cloos 403 machines are available. Year of manufacture: from 2005 to 2012. Other models of the Cloos 503 welding machines are in stock Iodpfxotkunuj Affstr

Condition: excellent (used), Year of construction: 2018, Very well maintained Quinto 603. Multiple machines of this type are available. Itedow Exytopfx Affor

Condition: good (used), MIG/MAG welding machine, MIG/MAG welding machine -Max. welding current: 320 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg Itodpfx Ajb A Hhvoffor

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! * Itsdpfx Afeu Nwx Uefjr

Condition: used, MIG MAG welding machine, shielded gas welding machine CLOOS Type GLC 357 N MIG MAG welding power source Serial No. 576 Year of manufacture: approx. 1985 Itsdpfx Afehubg Tofer Rated output: 350 Amps Output: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Infinitely variable adjustment range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roll drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg

Condition: excellent (used), Year of construction: 2003, Cloos GLC 451 C welding machine. Year of construction: 2003 With welding package Itodpfxstkuris Affer

Condition: good (used), Year of construction: 1993, MIG/MAG welding machine, MIG/MAG welding machine -Max. welding power: 350 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm Itedpfx Ajb Uw Nroffer -Weight: 190 kg

Condition: good (used), Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 Itodpfowubqtox Affsr -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, cloos robot Qirox 350 incl. control QC 2 touch sensor, seam tracking, point editor rotary gallow Itjdpsx Iu R Hjfx Affer welding machine cloos qineo puls 451, wirde drive, torch, torch hose package 2 light beams, 2 start pre selections manipulators on request

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system -Manufacturer: CLOOS, Qintron water-cooled MIG/MAG welding machine -Type: Qintron 400 -Max. welding power: 400 A -Water-cooled Isdpex Hgunefx Affotr -Wire feed case: Cloos FC 100E-KIT 4-roller drive -Accessories: incl. ground cable, gas valve, hose assembly (see photos) -Dimensions: 1100/700/H1240 mm -Weight: 181 kg

Condition: ready for operation (used), Year of construction: 2019, Main Drive Max payload 15 kg Media Power consumption 36 kVA Iedpfex D Hdhjx Affotr This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Application Types Welding

Condition: good (used), 450 A with premium panel. 16 units available. Price per unit: €2,500 excl. VAT. Itjdpsx Emufjfx Affor

Condition: used, Synergy operation, simple handling, and job memory, combined with the proven Control Weld and Rapid Weld processes: thanks to these features, the QINEO Tronic welding power source delivers top welding results. Further advantages of the QINEO Tronic include its compact design, flexible configuration options, and optimal efficiency. The QINEO Tronic offers excellent value for money in manual welding applications. - Differentiated and precise: infinitely variable parameter adjustment for manual applications - Top quality: optimal ignition and welding characteristics Isdpfjw I Ry Nox Affotr - Superior results: synergy operation with intelligent one-button operation for all common materials, gases, and welding wires - Practical and flexible: wide range of applications thanks to its low weight

Condition: used, Year of construction: 2012, functionality: fully functional, total height: 3,500 mm, working range: 3,000 mm, Single-wire welding robot, overhead suspended Controller Rotrol V5 Tactile sensor Qineo (gas nozzle, 60V) Tactile probe sensor (V5) Arc sensor (GLC V5) Welding technology Quineo Pulse A 450A Control module Master 5m RPU Ijdpfxjx At Tyo Affetr Cleaning cutter C-frame type CST stationary 3000 N Robot attachment height 3200 mm Total height 3500 mm Workpiece positioner VWR-3DP-5000N Maximum load 30000 N Swivel time for 180°: 6 sec. Complete H-frame 5000N Drive 3.1 kW Max load per station 7500 N, rated torque 800 Nm, moment of inertia 140 kgm2 Max rotation speed 20 rpm Clamping length 3000 mm, max free rotation radius 700 mm Integrated connection control Central power supply Safety technology: 4-beam light barrier with stand (deflection mirror not possible)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 2 Cloos welding robots Qirox QRC 320 incl. control V 6, cooling unit, socket for robot, 2 cloos welding machines cloos qineo champ 600, wire drive, welding torch, torch hose package, 2 station turning table incl. turning-tilting table consisting of 2 c bows with turning devices WP-DH-TSC-5 kN, load capacity/station 500 kg, distance of the surface plates 1500 mm, swing radius about 750 mm. Manax ( manually control of the turning device in the loading station) safety wall on turning table, 2 swing doors 1 light beam, 1 start pre selection, touch sensing, parameter interpolation, point editor, Master slave control of robots, CTMS autom. TCP control, Iedpotrdlpefx Affetr Machine will be completly overhauled before delivery.

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device Itjdpfx Aowrrp Uoffjr -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A -Dimensions: 660/390/H350 mm -Weight: 23 kg

Year of construction: 1991, operating hours: 18,100 h, condition: excellent (used), machine/vehicle number: 1683268, Item number MA 1141 Manufacturer Cloos type Romat 76 S / Rotrol 16 /6 G Year of manufacture 1991 Machine-No. 1683268 Iedeh Rmrgopfx Affetr control Cloos Rotrol 16 /6 G with manual control panel ( the control panel is new) weight [kg] 7000 Connected load 380V Operating hours [h] 18100 Equipment The robot is still under power and in operation. It is equipped with a Mag welding source Cloos GLC 353 MC 3 R pulsed and a Tig welding source Cloos GLW 250 I-H. Accessories manuals / 3 servo controllers were renewed

Year of construction: 2004, condition: ready for operation (used), A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible. Iedjxyk Szspfx Affotr

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11322 - 6759.470QC6, load capacity: 15 kg, arm reach: 1,700 mm, controller manufacturer: CLOOS, controller model: QIROX C, teach pendant manufacturer: CLOOS, input voltage: 400 V, input current: 44 A, type of input current: AC, • Year 2013 • Ready to weld Aluminium and Steel • Model QRC 350 QIROX • Control cabinet QIROX C – QRC 350 • Linear track of 15 m • Laser camera POWER CAM of SERVO MOTOR CANADA • Touch sensor Quinto • Arc sensor • Wire Barrel • Wire drive unit CK 118 R K CDD • Welding torch MRW 500-35°-78/273 Itsdpfxswcyffj Affor • CDD CLOOS DUO DRIVE • Welding machine QINEO PULSE 450 GLC 403 Quinto II with external cooling (Hot Countries) • Torch clean CMR 7 C DA with wire cutter

Condition: used, Year of construction: 2013, Robotic system consisting of: 1 welding robot Qirox QRH 390 incl. control unit, programming hand device, 24 V buffering, PC-side computer interface, 2 GB flash drive Itedpfx Asx Atp Ieffer Gas nozzle sensor, arc seam tracking, point editor, Qineo Puls 450 with Premium control module, wire feeder, torch hose package, welding torch, torch testing gauge, mechanical cleaning, pressure booster, Floor-mounted track 10 kN, travel length 8 m, robot installed in upright position on base pedestal. Wire drum travels with the system. 4 positioners with counter bearing WP-TC 10 kN, load capacity 1,000 kg, clamping length 3.0 m, rotation radius 1 m Connection control, 4 light barriers, 4 prestart selectors, Delivery: immediately available. Special price for purchase by 15.12.2025! System will be cleaned, tested, and serviced prior to dismantling. Warranty: functional guarantee Very low operating hours

Year of construction: 2004, condition: ready for operation (used), A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible. Itsdpfjxyk Susx Affer

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N Isdpfxow R T Tws Affstr load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning Itsdpexvbw Hsfx Affor 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning Itsdpfxjxvbu Es Affor 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.