Used Circular Saw Blades for sale (7,789)

Condition: used, functionality: fully functional, saw blade diameter: 400 mm, SCHMIDT sharpening machine for HSS saw blades Dodpfx Ajyxhmcodajkk

Condition: new, power: 5.5 kW (7.48 HP), Equipment: CE marking, documentation/manual, saw blade guard, Crosscut Saw AS Saw blade diameter up to 1,000 mm. Dedpfxod Szf Ns Adajkk Powerful saw motors. Pneumatic material clamps. Two-hand safety operation. Coolant system. Protective cover. Optional with hydraulic saw feed and material clamp. Optional with length measuring system or automatic positioning system. Version available as a saw-drilling or saw-punching automatic machine upon request.

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 450 mm, total length: 1,300 mm, total width: 1,300 mm, total height: 1,500 mm, cutting range round steel at 90°: 100 mm, overall weight: 500 kg, length stop: 2,000 mm, power: 4 kW (5.44 HP), Circular saw for Aluminium, capacity Ø 3 - 100 mm, blade Ø 450 mm, mitre LH + RH 22° - 90° - 22°, motor 4 kw, speed 2800 rpm; options: vertikal clamping, air/oil mist lubrication, digitale mitre device, pression regulation device, rollers left side 3 meter with vertical rollers, measuring rollers right side brand AMAT 2 meter with back pulling device; dimension 130 x 130 x 150 cm, weight ca. 500 kgs Dkodsyxfxispfx Adaek

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm Dodpfxjyu U Dfs Adaekk turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: excellent (used), CATALOG NUMBER 7890 Technical specifications: - Track width: 245 mm - Shaft width for edger: 380 mm - Shaft width for multi-blade saw: 320 mm - Max. blade diameter: 350 mm - Blade bore diameter for edger: 80 mm - Blade bore diameter for multi-blade saw: 65 mm - Max. cutting height: 120 mm - Table width (clearance): 900 mm - Table length: 1,780 mm Top components: - Pawls/kickback devices - Smooth pressure roller - Pawls - Smooth pressure roller Dkedpsyitxdefx Adask - Short element insert - Shaft with saw blades - 2 smooth pressure rollers Bottom components: - Guide - Pawls/kickback devices - Track - Centralized lubrication - Laser - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 30 kW - Manual body height adjustment - Manual saw shaft adjustment - Extraction outlet diameter: 210 mm - Overall dimensions (L x W x H): 1900 x 1500 x 1800 mm - Approximate weight: 2,000 kg ADVANTAGES – Made in Germany – Stepless feed speed adjustment – Shaft with floating blade for edging – Sleeve for multi-blade saw included – Laser – Short element insert – Used multi-blade saw, in very good condition Net price: PLN 55,900 Net price: EUR 13,300 (based on exchange rate of 4.2 EUR/PLN) (Prices are subject to change depending on exchange rate fluctuations)

Condition: excellent (used), Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available -Price: per piece -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm -Weight: 0.6 kg Dsdsb A H Elepfx Adaskk

Condition: excellent (used), Offered here is a heavy, well-preserved cold circular saw from the company Trennjäger. Dsdpfxeg Rxh De Adajkk Data: Saw blade: 275 x 2.5 x 40 T8 = Z110 Two speeds Angle adjustment: from 90°-0 Equipment: Hydraulic vice hydraulic feed (infinitely variable) Integrated coolant system

Condition: good (used), Year of construction: 1995, Longitudinal circular saw, Swiss manufacturer, with max. 5.1 m cutting length Dkedpfx Adswugihsaek with lamella carrier max. cutting width 450 mm max. cutting height 160 mm hydraulic feed motor

Condition: used, Year of construction: 1980, machine/vehicle number: 55155, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 200 x 80 bzw. 315 x 40 mm cutting area in mitre at 45° square: flach/hochkant 180x70/100x60 mm cutting speed: 19/28 m/min engine: 380 V, 1,7/2,6 kW Dsdpfect Nc Iex Adajkk space needed: 1100 x 1050 x 1620 mm weight: 850 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 850 h, input voltage: 380 V, input current: 110 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 120 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 3,800 rpm, total length: 2,720 mm, total width: 2,000 mm, total height: 1,980 mm, overall weight: 3,350 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, Very good condition, multi-blade saw Dsdpfxsyw H D Ds Adaokk

Condition: defective spare-parts repository (used), functionality: unexamined, Machine is not overhauled! With table extension Dksdpfx Aju Ivrqjdaok

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V Dedpfx Ajh Anyfsdajkk

Condition: new, Year of construction: 2012, Type: VCE-40 Maximum welding width up to 40 mm. Butt welding machine. Djdpfsywunwex Adaskk Manual clamping. Band width up to 40 mm. NEW machine. Delivery from stock. Weight: approx. 40 kg. Packaging included. 220 V, 50 Hz.

Condition: used, Tilting Blade Circular Saw (for precise angled cuts) Sliding table: 3800 mm Electric adjustment for blade lifting and tilting Cutting capacity Cutting width between blade and parallel guide: 1250 mm Cutting height with Ø 450 mm blade (90°): 155 mm Cutting height with Ø 450 mm blade at 45°: 115 mm Blade tilt: 0° – 45° Main blade Dkodpfx Adoywt Ageajk Max blade diameter: Ø 450 mm Blade shaft diameter: 30 mm Rotation speed: 3200 / 4000 / 6000 rpm Main motor power: 5.5 kW (7.5 HP) Dust extraction Extraction outlet: Ø 120 mm Scoring unit Scoring blade diameter: Ø 125 mm Scoring shaft diameter: 20 mm Rotation speed: 8000 rpm Scoring motor power: 0.5 kW (0.75 HP)

Condition: used, functionality: fully functional, Automatic band saw Brand: SABI Model: EB 320 A Dkodeyc Saajpfx Adaok Type: Automatic straight-cut Weight: 1750 kg Cutting capacity: 320 mm / 320x320 mm / round 320 mm Saw blade dimensions: 4570x32x1.1 mm Variable cutting speed: 16-100 m/min. Automatic feed length: 500-4500 mm UNITRONICS control system newly installed 2 years ago.

Condition: new, saw blade diameter: 450 mm, – Saw blade 450 mm – Double mitre – 4 pneumatic clamps – Hydrocheck system – Automatic safety cover – Misting lubrication system Dksdpfx Asrcb Tzedaok – 1 roller conveyor 300 cm with length stop – Blow gun – Protective cap – Documentation – 400V

Condition: new, saw blade diameter: 450 mm, Equipment: documentation/manual, - Semi-automatic - Saw blade 450 mm - Double miter - 4 pneumatic clamps Dedjgg N Riepfx Adaokk - Mist lubrication system - Roller conveyor 300 cm with length stop - Blow gun - Automatic protective cover - Documentation - 400V

Condition: excellent (used), Handheld circular saw MKS 145 EC - Year of manufacture: 2015 - Cutting depth: 145 mm - Power: 2600 W - Voltage: 230 V - Swivel range: 0–60° Dkedpfxoyty D Is Adajk - Saw blade diameter: 370 mm - Dimensions: height 430 mm x width 430 mm x length 710 mm - Weight: 13.8 kg

Condition: used, cutting height (max.): 160 mm, Multi-blade saw COSTA model PUMA 2/50, height 160 mm, width 350 mm, 2 motors of 37 kW each. Dkjdpfx Asywcrdedaok

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm cutting range B:1000/1250 x H 220/120 mm cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw Dodpfxexnc U Rj Adaokk - part fixures - new security componens - external control panel - long cut 1250 mm/ hight 120 mm possible with removed miter stop

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Edger, trimming saw, multi-blade saw MADREW DCKWW 300/15 Year of manufacture: 2014 Dsdpfxjx A Sfnj Adajkk Machine is fully operational and in very good technical condition. TECHNICAL DATA: Saw spindle motor power: 15 kW Stepless feed speed adjustment: 6.0 ÷ 35 m/min Saw spacing with spacers (Board Width): 20 ÷ 300 mm Max number of saw blades: 4 Applicable saw blade diameters: Ø 250 ÷ Ø 400 mm Maximum cutting height: 120 mm Minimum board length: 1000 mm The machine is equipped with interlock and safety systems, ensuring safe and reliable operation: - Phase sequence and phase loss indicator - Overload indicator for the machine due to blunt blades or excessive feed rate

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Dkodpsv Nq Rmofx Adask Material feed Material discharge Chip conveyor

Condition: used, Motor output 1,5 kW Cutting height ca. 95 mm Dodpfsythd Aox Adaekk Saw blade diameter max. ca. 300 mm Table dimensions 560 x 710 mm Ulmia 1622 circular table saw for precise rip and cross cuts in solid wood and wood-based materials. The robust design enables reliable work in the trade and in the workshop. Ideal for joineries and general wood and furniture construction.

Condition: used, cutting width 250 mm Djdpfoyr Slbex Adaskk Table dimensions 500 x 650 mm Saw blade diameter max. ca. 300 mm Frommia KS 381 table saw for precise longitudinal and cross cuts in solid wood and wood-based materials. The robust construction, angle stop, and swivel table enable reliable work in crafts and workshops. Ideal for carpentry shops and general woodworking and furniture construction.

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Dkedpfsu R S Dhox Adaok Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -