Used Circular Saw Blades for sale (8,827)

Condition: excellent (used), Year of construction: 2015, Saw blade Ø: 350 mm for pipes 90/45°: 120/110 mm for square tube 90/45°: 105/95 mm for profiles 45°: 105x105/80 or 110 x 80 mm for round material at 90/45°: 60/50 mm 2 saw blade speeds: 1400/2800 rpm Dcodpfx Ajxlg Icof Ien Space requirement with original stand: 1050 x 600 x 1450 mm Weight: 162 kg

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 34 kW Leistung des Sägemotors: 18,5 kW Dedpfexlcaujx Af Iocn Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Dcodjxk Uunjpfx Af Isn Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Base machine weight: approx. 450 kg Infeed roller conveyor weight: approx. 140 kg Good condition

Condition: excellent (used), Deburring machine for band saw blades IDEAL model SM60 to remove the residual welding bead. Dedpfx Ajxk Tb Tjf Iscn

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 34-2007-S11007, power: 29.2 kW (39.70 HP), saw blade diameter: 800 mm, total length: 16,100 mm, total width: 3,650 mm, overall weight: 5,000 kg, total height: 2,700 mm, frequency: 50 Hz, This circular saw for wood was manufactured in 2008. It features a cutting length of up to 8000 mm and can handle wood heights of up to 300 mm. It is equipped with four knives, two fixed and two movable, all with a diameter of 800 mm, ensuring efficient cutting. The machine also includes a feed line speed of 50 pcs/min and an under-machine waste conveyor. The power supplied is 30 Kw. Dedpfx Afsvmpi As Ijcn

Condition: used, Double drilling mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Dcsdpfx Aov Tnihjf Ien

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Dodpfx Aeh Anyfjf Iocn

Condition: new, Year of construction: 2025, cutting width (max.): 3,200 mm, CIRCULAR SAW model SICAR SEGA 350 NEW machine in PROMPT DELIVERY SUPER DISCOUNTED PRICE with scoring unit digital tilt angle reader 0° / 45° bridge saw blade guard CE regulations : YES with Instruction Manual and CE declaration volts.380/50 up / down and tiltable 45° of blades are manual digital tilt angle reader 0° / 45° carriage mm. 3200 indipendent motors main motor power Hp 7,5 scoring unit motor power Hp 1 Dcodpfsq Au U Hsx Af Ion max. diam. blade mm. 350 diam. of scoring unit mm.120 max. cutting hegiht at 45° mm. 92 max. cutting height at 90° mm. 120 max. cutting width at parallel guide mm.1250 bridge saw blade guard volt. 380/50

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min Dodpfxstv Rgrs Af Ijcn air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: good (used), Year of construction: 1989, Brand: Lyonflex Year: 1989 In perfect working condition Djdpfx Afoxlildj Iocn 380V Table length: 1.60 m Table depth: 1.75 m

Condition: not inspected (used), Year of construction: 1991, functionality: unexamined, saw blade diameter: 400 mm, cutting capacity: 120 mm, Automatic circular saw for aluminium. Mitre device and chip conveyor. Cutting range round approx. 120 mm. The machine comes from a trade-in, untested. According to our customer, it worked until the end. Since we have not carried out a functional test, the sale is made excluding any warranty, and returns are not possible. Dcjdpfsxlcd Hex Af Ien

Condition: used, GRAULE AGT pull and table circular saw Dcodpfx Ajxf Tr Uof Isn

Condition: used, Year of construction: 1992, functionality: fully functional, Panel Saw Spindle Moulder Combination Machine Table Saw Circular Saw Joiner's Saw Panel Saw Table Spindle Moulder Tilting Spindle Moulder FELDER Model: KFS37 FL Year: 1992 Sliding Table Length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 75 cm Extension table with extendable crosscut fence Mitre fence Main motor power: 4 kW Tilting Spindle Moulder Manual height adjustment of the tilting spindle Manual tilt of the spindle moulder up to 45° to the rear Spindle diameter: 30 mm 3 speeds adjustable via belt Spindle can be lowered under the table and removed Dcjdpfx Asxkyd Uef Ijn Moulder motor power: 4 kW Moulder fence with fine adjustment on both fence jaws The machine is equipped with a transport carriage and lifting bar, making it very easy to move. Prior inspection is expressly recommended; simply leave your telephone number by email and I will get back to you to arrange a viewing appointment. Subject to prior sale; all information provided without guarantee. Machines can be collected personally or shipped by freight carrier at the buyer's expense. Loading and/or packaging can be organised by us. The shipping costs indicated are a guideline; they may vary depending on distance and unloading options. Please inquire for details. The item is offered under the margin scheme (differential taxation). The stated price is the gross final price. An invoice including VAT is not provided. Warranty terms: Due to age and wear, the sale is only to commercial buyers, with no warranty, guarantee or right of return. All information provided without guarantee. By placing a bid, the buyer acknowledges these terms.

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm max. cutting height 170 mm Dcedpfx Afjxiu Dtj Ien motor 11 kW

Year of construction: 2015, condition: used, Cutting height max. 140 mm Motor output 11 kW cutting width 600 mm Cutting length 6200 mm Dimensions (L/W/H) 8400x1900x2090 mm Weight 3500 kg Number of working hours 3331 h Raimann FlexiRip "Jrionline" Automatic Longitudinal Circular Saw ----- Cutting length 6200 mm Machine base, carriage, feed ----- - Motor according to IE3 standard: 11 kW (15 HP) - Precise cutting thanks to the self-supporting, torsion-resistant steel construction and carriage guides on generously dimensioned, hardened, and ground round steel tracks. Extra-long and wide carriage with ball-bearing rollers, precisely adjustable and play-free via eccentric axes. - Clean cutting thanks to the stepless height adjustment of the saw blade for quick and optimal adjustment of the saw blade projection to the workpiece thickness. (Levels 1-18) - Continuously adjustable feed speed via pedal across the entire cutting length from 1-80 m/min - Potentiometer for presetting the maximum feed speed - Anti-blocking system for FlexiRip: If the maximum permissible load is exceeded, the saw blade automatically lowers to prevent jamming. The saw carriage then returns to the start position. Your advantage: Reliable protection against machine overload and sawblade jamming - Saw shaft speed: 2,900 rpm - Maximum cutting height: Sawblade diameter 400 mm: Max. cutting height 65 mm Sawblade diameter 450 mm: Max. cutting height 90 mm Sawblade diameter 500 mm: Max. cutting height 115 mm Sawblade diameter 550 mm: Max. cutting height 140 mm Width stop and machine table ----- - Width stop adjustment via several control levers on the front of the machine for precise positioning of the stop with a large digital display, easy to rotate and tilt. Dcjdpfewk N U Esx Af Ijn - Width stop in a cantilever design with 6 pneumatically pivoting stop cams - Smooth, even, and backlash-free operation of the stop - Width stop driven by 2 hardened, ground ball screws, 32 mm diameter - Maximum usable width (standard): 600 mm - 6 cross chains in the rear machine table, including an extension to the vibrating feeder with roller conveyor transfer (L = approx. 600 mm) to the vibrating feeder. Chain distribution according to the layout plan Control System ----- - Electronic machine and stop control "PLC control" with easy-to-read touchscreen on the left side at the start of the cut, mounted at eye level, easily adjustable for rotation, tilt, and height. Ten different cutting lists can store 10 width dimensions each and easily retrieved by touching the screen. These dimensions can be accessed either absolutely or as consecutive dimensions, the latter for working from back to front. Furthermore, for the consecutive sequence from back to front, five different dimensions with target quantities can be stored for automatic board cutting. - The width stop's free travel function can be selected via the touchscreen. - Error diagnostics via error display and cause note in plain text on the screen. Hour and cut counters for precise recording and output of production output. - Rotatable control panel on the swivel arm is particularly advantageous when cutting large-format panels. Operation and Tools ----- - Workpiece clamp mounted on the upper guard beam, inside the slats. ...

Condition: used, Double edger / Edger line / Multi-blade circular saw Dedpfx Aexhbxnsf Iscn Wurster & Dietz LB 12 0-line left Right-hand machine (adjustable saw blade right) max. pass-through height: 100 mm max. pass-through width: 65 mm with 5-strand cross conveyor as feed with 2 crosscut saws with roller infeed table with laser with lath head with chip separator with spiral roller conveyor (length: 9 meters) with discharge table (cross conveyor 5-strand) (length: 5.2 m, width: 2.2 m) Location: Austria, near Ried im Innkreis

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA track width 250mm shaft width 250mm max. disc diameter 350mm disc hole diameter 80mm max. cutting height 120mm table width with clearance 700mm table length 1790mm *from above: pawls smooth pressure shaft pawls smooth pressure shaft shaft with saws 2 smooth pressure shafts from below: guide smooth slip shaft pawls track central lubrication 1.1kW feed motor Dcedevx Rcuspfx Af Isn 30kW main motor electric lifting of the body manual lifting of the shaft with saws diameter of the exhaust port 160mm overall dimensions length/width/height 2250x1700x2000mm weight approx. 3000kg – German production – electric lifting of the body and shaft – smooth regulation of the feed speed – used multi-saw, very good condition Net price: PLN 76900 Net price: EUR 18100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data to follow Dcjdpfjxfc R Tox Af Ien Location: Flörsheim Availability: short term

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm HSS unused ,from magazine liquidation Dcsdpfxemxi T As Af Ijn bearing number 28418

Condition: used, saw blade diameter 530 mm capacity 90 degrees: round 180 mm capacity 90 degrees: square 170 mm capacity 90 degrees: flat 380x70 mm capacity 45 degrees: round 180 mm capacity 45 degrees: square 150 mm capacity 45 degrees: square 290x70 mm total power requirement 2,2 kW weight of the machine ca. 350 t dimensions 1,1 x 0,9 x 1,5 m Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings Djdpfxod Iinwe Af Iocn · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Saw blade optional

Condition: new, Circular saw blade Dcodpfx Asmxi T Uef Ien HSS diameter 225 mm Number of teeth 180 pitch 4 mm width 2 mm Bore 32 mm (28419) unused, from magazine liquidation

Condition: used, saw blade diameter 400 mm capacity 90 degrees: round 110 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 200x60 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 140x60 mm total power requirement 1,5 kW weight of the machine ca. 130 t dimensions 0,8 x 0,7 x 1,3 m SPECIAL PRICE!! Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Optional saw blade Dedpfx Ajd Iinxof Iecn

Condition: new, saw blade diameter 275 mm capacity 90 degrees: round 90 mm capacity 90 degrees: square 80 mm capacity 90 degrees: flat 100x70 mm capacity 45 degrees: round 75 mm capacity 45 degrees: square 70 mm capacity 60 degrees: flat 80x60 mm total power requirement 1,1/1,3 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,5 x0,85 x0,95 m The versatile professional metal circular saw. Convincing in performance and price. • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Cone safety clutch made of hardened steel to protect the saw blades. • 2 speeds 33 + 66 rpm • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Closed cast, massive cast superstructures • Operator side miter adjustment • Machine base (option) Dodped Iipajfx Af Iecn ATTENTION: Price is without saw blade!!! (saw blade price EUR 70)

Condition: new, saw blade diameter 130 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 100 mm Djdpehpktyjfx Af Iocn capacity 45 degrees: flat 120 x 100 mm engine 3,3 / 4,4 KW 0 1400 / 2800 U/min weight of the machine ca. 1060 kg dimensions 2,5 x 1,8 x 1,85 m TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen.

Condition: new, saw blade diameter 250 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 95x60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 65x60 mm total power requirement 1,0 kW weight of the machine ca. 0,075 t dimensions of the machine ca. 0,3 x0,8 x0,75 m SPECIAL PRICE!!! The ideal metal circular saw for workshop and assembly • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Optionally with 230 V or 400 V motor • Automatic cooling directly on the saw blade Dcsdpod Iipbjfx Af Ien • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Subframe (option) additional price 172,-EUR ATTENTION: Price is without saw blade!!! (saw blade price EUR 62,-EUR)