Used Channel Cutter for sale (3,649)

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Bale press Presona LP 85 VH2 with cross-tying, year of manufacture 2018 Pedszk Dtgepfx Amyjpw Technical data: Manufacturer: Presona Sweden Type: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pressing force, pre-press: 28 t Pressing force, main press: 85 t Infeed chute: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical volume output: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2000 L Transport dimensions, press: 10400 x 2400 x 2800 mm (L x W x H) Weight: approx. 27,000 kg Materials: Paper, cardboard, PET bottles, film, light waste. Note: The press is in good condition. It has been removed from ongoing operation. Technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Pedjzk Drvopfx Amyopw Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Bale press Paal Konti 200 D, year of manufacture 2000 Technical data: Manufacturer: Paal Type: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-wire automatic Throughput capacity at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Ppodpfszk Ddxox Amyew Bale weight: 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (L x W x H) Machine weight approx. 15,000 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested. A video can be found on our website or YouTube channel. Complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offer is subject to change, prior sale and is revocable at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2013, operating hours: 12,200 h, functionality: fully functional, Baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer: Paal Type: Konti 325 G Year of manufacture: 2013 Operating hours: 12,110 Pressing force: 100 t Drive power: 2 x 55 kW Infeed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-strand automatic Throughput at: 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, lightweight waste, plastic waste The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: Pjdpfezk Apyox Amyopw All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-wire automatic Throughput at: 35 kg/m³ approx. 14 t/h Pjdpfx Amjzk Alueyjpw 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste The press is in good working order and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. This offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: excellent (used), ABBA ALBAMAT 900 V5-Z1 – Fully automatic channel baler – 90 t pressing force Manufacturer: ABBA Pressentechnik Type: ALBAMAT 900 V5-Z1 The machine is in very good, fully functional condition and is available immediately. An inspection and test run can be arranged. The ABBA ALBAMAT 900 V5-Z1 is a powerful, fully automatic channel baler for high throughput and is ideally suited for compressing a wide variety of recyclable materials. Suitable for: * Cardboard * Waste paper * Corrugated cardboard * Printing waste * Plastics (PET, HDPE, etc.) * Films * Aluminum and tinplate cans * Wood shavings * Glass wool * Shrubbery cuttings Equipment * 90 t pressing force * 1 main press cylinder * Large feed opening * 5-point fully automatic vertical wire tying * Hydraulically automatic 3-sided channel adjustment * Hardox press bed * Hardox piston guide with wear-resistant guide strips * High-performance cooler * Control cabinet and tank heating * 10 different press programs Psdszil S Uspfx Amyjpw * 5.7” touchscreen operation * Floor and piston slides to protect the tying unit Technical data * Pressing force: 90 t (900 kN) * Feed opening: 1,140 × 1,700 mm * Bale dimensions: approx. 1,080 × 1,100 × up to 1,200 mm * Bale weight paper/cardboard: approx. 500–750 kg (material dependent) * Drive power: 90 kW * Throughput cardboard (35 kg/m³): up to approx. 10 t/h * Flow rate at idle: 698 m³/h * Flow rate under operating conditions: 543 m³/h * Cycle time: 16 seconds * Specific pressing force: 76 N/cm² * Machine weight: approx. 24,000 kg Available for immediate delivery. Transport and loading can also be arranged upon request.

Condition: used, Year of construction: 2006, Offer in progress! Ppjdpfx Amswftufsyow

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm table length 600 mm table width 400 mm Ppjdpfx Amet Hwr Uoyjw total power requirement 2 kW weight of the machine ca. 1500 kg

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Control cnc Ppsdpfx Amowgnz Nsyjw

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm grinding length 0 mm workpiece length 970 mm total power requirement 12 kW Ppedpfjt Hwpasx Amyew weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm Ppedst Hwnvspfx Amyew No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg Podpet Hw Nmsfx Amyjpw dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: good (used), Offer includes: Polar 92X, year of manufacture 2005, approximately 700,000 cuts, including spare blades, side cast-iron tables, inspection and demonstration possible, immediately available. Ppedpfx Aozkwtmjmyow

Condition: excellent (used), functionality: fully functional, Format 880/640, pneumatic clutch Ppedpfx Aeygl Ulsmyow

Condition: excellent (used), Tool and cutter grinder AUTOOL model VS300 Ppodpfx Aexfk T Ajmyow

Condition: like new (used), Tool and cutter grinder GRIFO model U10 Ppjdpfxsinbile Amyow

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Psdpfx Amjziyrpsyopw Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: like new (used), Year of construction: 2020, Shaper Origin Weight: 6.75 kg Description: Shaper Origin is the world's first handheld CNC milling machine, allowing you to easily integrate digital precision into your familiar workflows. Additional description: Thanks to its intuitive operation, automatic milling correction, and on-tool CAD, it simplifies many processes in your workshop, making them more precise and efficient. Create and edit projects directly via the touchscreen on the tool or import designs from your software. Use Origin flexibly wherever you need it, whether in the workshop or on the construction site. Whether for recessing fittings, creating inlays, or making perfectly fitting joints, Origin offers versatile, professional, and creative application possibilities. Features: Designed for woodworking, with a familiar form factor. Work on site with virtually any size workpiece. Design and mill perfect contours, joints, and engravings. No CAD knowledge required. On-tool design. Automatic milling correction. Intuitive operation. 8mm collet allows for the use of many milling cutters. Scope of delivery: Shaper Origin with Shaper SM-1 spindle Shaper Systainer³ T-Loc Two rolls of ShaperTape (45 m each) Tool for changing milling cutters Reusable transport locks Ppedpszlwduofx Amyew USB A/C stick Various milling cutters Technical data: Height: 306 mm Depth: 227 mm Width: 339 mm Weight: 6.75 kg Year of manufacture: 2020 Absolutely new, from a training workshop Workstation available at an additional cost of 350.

Condition: good (used), Height 2300 Width 2700 mm Length 2200 mm Weight 5000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 102 kw Main material Stainlees Steel Cutter Type Vacuum Bowl Cutter Bowl made of Stainless steel Bowl capacity 200 l Knives amount 6 pc. Ppsdpern S Azjfx Amyjw Knife shaft revolutions 680-5050 rpm Bowl revolutions 4-16 rpm

Condition: good (used), D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph Pjdjrwz I Ajpfx Amyjpw

Condition: excellent (used), NNP Cheese block cutter Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h, Pedpfjwtilpox Amyspw

Condition: used, Year of construction: 2005, functionality: fully functional, collet bore: 18 mm, spindle speed (min.): 2,800 rpm, grinding wheel diameter: 100 mm, type of input current: three-phase, overall weight: 45 kg, total height: 350 mm, total length: 400 mm, total width: 450 mm, Equipment: lighting, Stichelschleifmaschine Pregraph U2 Year of manufacture: 2005/11 Type: Tool grinding machine U2 For grinding scribing tools, milling cutters and all round parts. The machine is a Taiwanese replica of the well-known German model, but with an improvement: the grinding wheel can be adjusted axially to the dressing tool, thus maintaining the setting. There are many replicas, but most are not suitable for professional use. We use this machine ourselves in our workshop and it is equal to the German original. Motor power: 0.25 kW Speed: 2800 rpm Grinding wheels: Ø 100 mm Dimensions: 450 x 400 x 350 mm Weight: 45 kg Included: 1 pc. cup grinding wheel for steel/HSS, used 1 pc. cup grinding wheel for carbide, used 1 pc. diamond cup grinding wheel for carbide, used 1 pc. cut-off wheel Ø 100 x 1 for steel/HSS, used 1 pc. holder for cut-off wheel 35 pcs. collets Ø 0.5 to 17.5 in 0.5 increments 16 pcs. collets (e.g. 1/8" and special sizes, some duplicated) Machine light Operating manual Optional: NEW, unused stock items: Collets type 355E; from Ø 0.5 to 18 mm, in 0.5 mm steps and fixed collets Ø 18 / 20 / 25 mm Cup grinding wheel Ø 100 x 50 mm for steel/HSS, grit 80 (medium) Cup grinding wheel Ø 100 x 50 mm for steel/HSS, grit 120 (fine) Diamond cup grinding wheel Ø 100 mm for carbide, grit D126 (medium) Diamond cup grinding wheel Ø 100 mm for carbide, grit D64 (fine) Cut-off wheels Ø 100 x 1 mm Flanges for grinding wheels, also with balancing option Balancing stand with mandrel for balancing grinding wheels Tool bit grinding attachment Drill bit grinding device Psdpfx Aezldwnjmyjpw Base cabinet Dimensions: 445x345x840 mm Weight: 26 kg

Condition: excellent (used), Urschel GRL strip cutter for French fries. The machine has been serviced and is ready to work. SPECIFICATIONS Length: . . . . . . . . . . . . . . . . . . . . . . 59.25" (1505 mm) Pjdsv Srfqopfx Amyjpw Width: . . . . . . . . . . . . . . . . . . . . . . . 63.38" (1610 mm) Height: . . . . . . . . . . . . . . . . . . . . . . 53.24" (1352 mm) Net Weight: . . . . . . . . . . . . . . . . . . . . . 906 lb (411 kg) Motor: . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HP (1.5 kW) The Urschel® Model GRL is designed specifically for strip cutting plain and crinkle cut potato strips. Transverse fracturing and feathered edges of french fry pieces are minimized and longer cuts are produced with greatly reduced scrap. The machine features continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance. Maximum product infeed is 9" (229 mm) in length.

Condition: reconditioned (used), Number of milling spindles 2 St. fence ja ja /nein workpiece ja STEGHERR Cross-bar Milling Machine, Type KSF-mini ----- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERR's extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. Ppedpfszip Nwsx Amysw The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors; workpiece clamping is pneumatic. The profile cutter is designed to match the web width. The saw blades that perform the lap-joint cut can be adjusted to the profile cutter's dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. - Motor: 2.2 kW, 380 V, 50 Hz - Pneumatic pressure: 6 bar Includes: ----- - Machine stand - Foot pedal control - NEW ORIGINAL stop rail with scale and sliding stop featuring an optical setting aid, as shown in the photos. Tools as shown in the photos: 1 Profile cutter 3 Saw blades (corresponding to a web width of 10 mm) Footprint approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg ----- (All technical specifications provided by the manufacturer; no liability assumed!)

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Podpfx Asv Azb Nomyjpw