Used Channel Compressor for sale (4,278)

Condition: ready for operation (used), Year of construction: 2022, An oil-lubricated screw compressor AiRKO is offered. Motor power: 7.5kW, Motor speed: 3000rpm, Volume flow: 1.02m³/min, Max. operating pressure: 10bar. Viewing possible by prior arrangement. Hnjdpfx Ajzlkapja Esp

Condition: used, color: yellow, operating hours: 2,371 h, Pressure: 9.3 bar Hnsdpfxoy T Rgne Aa Eep Tank pressure: 9.3 bar

Condition: used, color: red, Year of construction: 1981, operating hours: 4,391 h, Pressure: 11 bar Hsdjx S Nxajpfx Aa Eenp Tank pressure: 11 bar

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Hnjdpfx Aezlhp Uja Ejp Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: good (used), Year of construction: 2004, operating hours: 35,000 h, functionality: fully functional, power: 15 kW (20.39 HP), type of cooling: air, Equipment: refrigerant dryer, Almig screw compressor flex 15 Drive (year of manufacture 2004) – including MDX 3600 air dryer (year of manufacture 2011) – well-maintained, inspected, and ready for use. For sale is an Almig screw compressor flex 15 Drive (year of manufacture 2004, 15 kW power) in well-maintained, technically flawless condition – including a matching MDX 3600 air dryer (year of manufacture 2011). The compressor has been regularly maintained and is in very good condition both visually and technically. It is fully functional, inspected, and ready for immediate use. The included MDX 3600 air dryer reliably provides dry, clean compressed air, thus protecting your downstream equipment and tools. Hnsdpfx Aaszlgmfo Eep With our comprehensive all-inclusive package, we can personally take care of the complete service for you – from delivery to commissioning of your new compressor. This includes unloading, installing, and aligning the system. Subsequently, our experienced service technicians will professionally commission the system, perform all necessary functional tests, and ensure that your Almig flex 15 Drive, together with the MDX 3600 air dryer, runs reliably and efficiently. In addition, we offer individual training sessions for your employees so that you can optimally utilize the system from the very beginning. We will also be happy to continue to support you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machinery. We place great emphasis on personal support and are always happy to assist you even after the purchase. You also have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come to our location and see for yourself the condition and functionality. With us, you are in the best hands – professionally, reliably, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: used, Refrigerant compressors system Bitzer -Type: 4J-13.2Y (x3) -Volume: 63.5 m3/h (x5) -Cooling capacity for R404A: 126 kW at -5°C/40°C, 105 kW at -10°C/40°C, 54 kW at -25°C/40°C -Cooling capacity for R134a: 75 kW at -5°C/40°C, 60 kW at -10°C/40°C, 25.8 kW at -25°C/40°C -Dimensions: 2250 x 890 x 1500 mm -Items in magazine: 1 -Reference number: Z137 Hodpjzldutsfx Aa Ejnp -Condition: Used, ready to work

Condition: good (used), Bitzer Model: S4G-12.2Y-40P Bitzer Refrigeration Compressor / Refrigeration Unit Description: For sale is a BITZER refrigeration compressor / condensing unit complete with pressure vessel and control system. This unit is designed for generating refrigeration or compressing refrigerant in cooling and industrial applications. Typical applications include: - Refrigeration units / cooling systems - Industrial cooling / process cooling - Cold storage / commercial refrigeration - Machine cooling The robust Bitzer compressor is engineered for continuous operation and is renowned for its high reliability. The unit features pressure switches, oil monitoring, and an integrated pressure vessel/heat exchanger. Technical Data: Manufacturer: BITZER Kühlmaschinenbau GmbH Compressor model: S4G-12.2Y-40P Receiver tank model: K573H Electrical specifications: Voltage: 400 V three-phase (3~) Frequency: 50 Hz Max. operating current: 24 A Starting current: 69 A / 113 A Hedpfx Aszizpvja Eonp Protection class: IP54 Performance data: Displacement: approx. 42.3 m³/h Speed: 1450 RPM Max. low/high pressure: 19 / 28 bar Receiver tank: Volume: 29.4 liters Max. permissible pressure: 33 bar Temperature range: -10 °C to +120 °C Approximate dimensions & weight: Length: approx. 110 – 120 cm Width: approx. 50 – 60 cm Height: approx. 70 – 80 cm Weight: approx. 180 – 220 kg Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Hnsdpfx Aasu Ic Ryj Eop 225 Kw Year 2012

Condition: good (used), Year of construction: 2008, Ingersoll Rand screw compressor 110 Kw Year 2008 Hjdpfx Aju Idnaja Esnp

Condition: good (used), Fluidair RPK47 Air compressor Serial: 41449 Rotary air compressor, working pressure 100PSI, Discharge pressure 8Bar, with fluidair rotastar control, 3Ph Hedpfxjrq Itqo Aa Ejnp

Condition: excellent (used), Year of construction: 2015, Worthington Creyssensac RLR208B500G10 Air compressor 2015, air compressor and dryer, 8Bar, mounted on 500L tank, 3Ph Hnodpfx Aewtqufsa Eep

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2019-21130, overall weight: 1,950 kg, pressure (max.): 300 bar, Equipment: type plate available, AIRCO PSAL 15 SN – Nitrogen generation system (PSA nitrogen generator), year of manufacture 2019, serial number 2019-21130. Manufacturer: AIRCO Systems GmbH, Frankfurt. Complete, turnkey PSA system for on-site nitrogen (N₂) generation – for example, for laser cutting machines, packaging, or process engineering. Equipped with an integrated AIRCO/Bauer MINI-VERTICUS high-pressure booster, control cabinet “NITROGEN N₂”, buffer tanks, and piping station. Technical data: – Type PSAL 15 SN (INMATEC technology) – Max. pressure 300 bar – Weight approx. 1,950 kg Hnodpszlat Ejfx Aa Esp – Year of manufacture 2019, low operating hours, serviced (AIRCO Systems service) Operates on electricity – Inspection with demonstration possible by appointment. Maintenance documentation available upon request. Dismantling/loading to be carried out by the buyer or by agreement. Payment before collection. Sale as is, excluding warranty. Export possible. Please include a call-back number with your inquiry.

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Hnjdpoxq Elwsfx Aa Esp

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Tank capacity Tank capacity 2 x 100 l Tank surface galvanized Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain Hjdoy Ifmrjpfx Aa Esnp

Condition: excellent (used), Year of construction: 2013, operating hours: 29,558 h, functionality: fully functional, Screw compressor, Atlas Copco GA55FF Hodpfx Ajzil Iija Eonp Dryer integrated 55 kW 9.75 bar 8.94 m3/min Year of manufacture: 2013 Operating hours: 29,558

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer: Kaeser Type: SM 12 Year of manufacture: 2016 Hnedpfx Aewx I Rusa Esp Power: 7.5 kW Operating pressure: 8 bar Refrigerant dryer: Manufacturer: Kaeser Type: ABT 12 Year of manufacture: 2016 Refrigerant: R-134a Tank: Manufacturer: BWB Behälter-Werk Year of manufacture: 2016 Design pressure: 11 bar Capacity: 270 liters After oil and filter inspection (replacement) Technically in perfect condition! PRICE REDUCTION FROM 4250 TO 3550 EUR!!!

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Used Jun-Air 6-J mini air compressor providing quiet, oil-free compressed air for laboratory instruments and analytical equipment. Hodpfx Aaexzg Sas Eonp

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAHS186 portable compressor, equipped with an end cooler, after a complete service. Technical data: capacity: 10.50 m3/min; working pressure: 12 Bar; year of manufacture: 2015; DEUTZ engine, 104 kW; mileage: 2016 hours. The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: 109,500 PLN Hnedszk Amxjpfx Aa Eep Gross price: 134,685 PLN The machine was imported in perfect condition and has all the necessary documents for registration. Links to videos are provided below.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, KAESER M31 diesel compressor – in perfect condition, fully serviced, ready for registration!!! Technical specifications: capacity: 3.15 m3/min year of manufacture: 2015 engine: KUBOTA engine power: 24.1 kW operating hours: 1319 h Hnedpfx Ajzky Rzoa Eop The machine has been imported and is fully functional, ready for operation. net price: 29,500 PLN gross price: 36,285 PLN Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAS137 portable compressor, equipped with an aftercooler, fully serviced. Hnodpozky Nkofx Aa Esp Technical data: flow rate: 7.70 m3/min; working pressure: 7 bar; year of manufacture: 2015 engine: KUBOTA operating hours: 2000 h compressor in perfect working order, ready for operation, with warranty. net price: 59,500 PLN gross price: 73,185 PLN machine imported in excellent condition. Links to videos are provided below.

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault Hnodpeziawrefx Aa Eep - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Here we offer a FPZ side channel blower. FPZ side channel blower. Original retail price 2356 euros, now 1999 euros! Installed engine power: 9.2 kW 50 Hz 2900 rpm / 10.6 kW 60 Hz 3500 rpm pressure difference: Hnedjkt S H Sspfx Aa Esp - 230 / + 230 hPa ( mbar ) 50 Hz 2900 min-1 - 175 / + 175 hPa ( mbar ) 60 Hz 3500 min-1 Max sound pressure level: 80.5 Lp / Lw (1) dB (A) 50 Hz 2900 min-1 82.5 Lp / Lw (1) dB (A) 60 Hz 3500 min-1 Maximum absolute pressure: 0.28 (2.8) Ps max A MPa (bar) Weight: 93.0 kg new in the sense of unused! Type: SCL K11-MS MOR Scope of delivery: (see picture)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,928 h, functionality: fully functional, machine/vehicle number: API124918, overall weight: 810 kg, power: 30 kW (40.79 HP), volume flow: 331.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Chicago Pneumatic CPVS 40 variable speed screw compressor – 30 kW – manufactured in 2015 For sale: a well-maintained Chicago Pneumatic CPVS 40 screw compressor. This compressor features variable speed control, allowing it to efficiently adapt to the compressed air demand. The compressor has already been serviced and is ready for immediate use. Hjdpfxozkvb No Aa Eenp Specifications: Type: Chicago Pneumatic CPVS 40 Year of manufacture: 2015 Motor power: 30 kW / 40 hp Capacity: 5.52 m³/min Maximum working pressure: 10 bar Voltage: 400 V / 50 Hz / 3 phases Motor speed: 3,555 rpm Weight: approx. 810 kg Operating hours: 29928/27409 Variable speed control Serviced and ready for use This compressor is suitable for industrial applications where a reliable and energy-efficient compressed air supply is required. Optionally available with a new or used compressed air tank.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: API607459, overall weight: 1,580 kg, power: 55 kW (74.78 HP), volume flow: 637.2 m³/h, operating pressure: 7 bar, pressure (max.): 7.3 bar, type of cooling: air, Equipment: refrigerant dryer, Atlas Copco GA55+ FF screw compressor – 55 kW – manufactured in 2009 For sale: a well-maintained Atlas Copco GA55+ FF screw compressor with an integrated air dryer. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Atlas Copco GA55+ FF Year of manufacture: 2009 Motor power: 55 kW / 75 hp Capacity: 10.62 m³/min Working pressure: 7.3 bar Motor speed: 2,978 rpm Weight: approx. 1,580 kg Operating hours: 17473/4022 Equipped with an integrated air dryer Serviced and ready for use Hnedpszku Ubefx Aa Eop This compressor is suitable for industrial applications that require a reliable compressed air supply. Optionally available with a new or used compressed air tank.

Year of construction: 2010, condition: used, Used machine Used screw compressor from Schneider, type AIRMASTER AM 7-10, with refrigerated air dryer Schneider DK 985 ECO and compressed air tank. Year of manufacture: 2010 Technical data compressor: Volume flow: 930 l/min Final compression pressure: 10 bar Motor power: 7.5 kW Hnjdpfx Aaszh Rt Is Eop Technical data refrigerated air dryer: Air volume flow: 985 l/min Max. operating pressure: 16 bar Refrigerant: R134a Air connection: 3/4 inch Power consumption: 0.3 kW Technical data compressed air tank: Tank volume: 270 l Max. operating pressure: 16.5 bar Availability: short notice Location: Flörsheim