Used Chainstitch Machine for sale (64,985)

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Nedszwfqyjpfx Ahkolf

Year of construction: 2019, condition: used, Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible. Nljdpszwgidefx Ahkjf

Condition: used, Year of construction: 2015, A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible. Njdpfxezwnzbe Ahkslf

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 111, Ceetec IP250 industrial painting machine for painting, varnishing, oiling or lacquering of mouldings, claddings, deckings etc. Nlsdpfx Ahswa D N Njksf Industry model, robust heavy duty machine for daily production. Maximum work piece cross section 100x250mm. Production speed up to 150 m/min. Including infeed and outfeed roller conveyors (manual). Very good condition. New price ca 30 000€

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks Nledpfx Asy Nkhdjhkef 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: used, Surface Grinding Machine ERNAULT SOMUA FU 660 Travel X: 660 mm Nljdezwxf Repfx Ahksf Travel Y: 400 mm Travel Z: 400 mm Magnetic chuck BRAILLON 700 x 300 mm Grinding wheel: Ø 355 mm Motor power: 7,5 CV Swivel head Automatic diamond cutting Auto stepover X - Y - Z Lubricant tank Hydraulic Group Voltage: 220 V Tri Length: 2900 mm Depth: 2000 mm Total height: 2200 mm Weight: approx 4,5 T

Year of construction: 2015, condition: good (used), functionality: fully functional, For sale is a HAIMER Power Clamp 2006 Economic NG including a HAIMER tool cooling unit. This system is ideally suited for shrinking and then rapidly cooling tool holders. Technical data: * Manufacturer: HAIMER * Type: Power Clamp 2006 Economic NG * Year of manufacture: 2015 * Serial number: 7105551 * Includes HAIMER AirCool tool cooling unit * 400-volt connection * Adapters SK40, SK50, HSK 63 Condition: The system is in good, used condition. Inspection and functional testing are possible by appointment. Shipping is possible. Nedezwptfspfx Ahkjlf Please contact us if you have any questions or would like to see a functional video. Note: The sale is made by a commercial seller. The stated price includes the statutory value-added tax. You will, of course, receive an invoice with the VAT shown. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Nlodjyi A Tdspfx Ahkof Storage location: Nattheim

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Nedpfx Ahozwxz Ejkelf Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: used, Year of construction: 2002, For sale: Junget / Biesse Rover 24 L CNC milling machine / machining center. The machine is designed for professional processing of furniture panels, wooden components, plastics, and production components. It is suitable for carpentry workshops, companies producing furniture, kitchen elements, fronts, structural panels, PEHD components, and other parts requiring precise milling and drilling. The Biesse Rover 24 L is a robust CNC machining center equipped with a vacuum table, automatic tool changer, and a set of drilling spindles. The machine enables quick and repeatable performance of milling, vertical and horizontal drilling, and grooving operations. Technical specifications: Model: Junget / Biesse Rover 24 L Type: CNC milling machine / CNC machining center Machine dimensions: approx. 5.8 × 2.45 × 2.5 m Work table: vacuum X-axis travel: 4500 mm Y-axis travel: 1300 mm Z-axis travel: 180 mm Vacuum pump: 120 m³/h Control system: NC1000 Operating system: Windows XP Automatic tool changer: yes Vertical drilling spindles: 7 pcs Horizontal drilling spindles: 8 pcs Circular saw: for making grooves / slots, e.g., in fronts or furniture components Safety features: safety grid / safety mat Tools installed in the machine: included Applications: The machine is particularly well-suited for the production of furniture, kitchen cabinets, fronts, carcasses, base panels, and components requiring serial drilling and milling. The drill array allows for the simultaneous execution of several holes, which speeds up production and ensures dimensional repeatability. The machine was mainly used for processing PEHD1000 plastic, which confirms its versatility and the ability to work not only with wood-based materials but also with engineering plastics. Technical condition: The machine has been used. According to information from the previous owner, the device is functional, starts up, and has no known defects or reservations. The equipment is sold as used and is subject to verification by the buyer upon collection. Nlsdpozf E E Hefx Ahkef Key advantages: * robust industrial construction, * large working area, * vacuum table, * automatic tool changer, * vertical and horizontal drilling spindles, * circular saw for grooves and slots, * ability to process panels, wood, and plastics, * good machine for the production of furniture and serial components. The machine is suitable for continued operation in a production plant, carpentry workshop, or company engaged in CNC machining.

Condition: excellent (used), Year of construction: 2009, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 12,000 rpm, spindle motor power: 12,000 W, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Available: End of October/Beginning of November Manufacturer: DECKEL MAHO (DMG MORI) Model: DMU 60 monoBLOCK Year of manufacture: 2009 Operating hours: approx. 30,000 h Spindle hours only: approx. 8,000 h Nodszwx Aispfx Ahkjlf Control system: HEIDENHAIN iTNC 530 Axes: 5-axis simultaneous machining Technical data & spindle: Travels: X = 730 mm | Y = 560 mm | Z = 560 mm 4th axis (B-axis – swivel head): +30° to -120° (NC swivel milling head with hydraulic clamping) 5th axis (C-axis – rotary table): 360° (endlessly rotatable NC rotary table, resolution 0.001°) Main spindle: max. 12,000 rpm (high-torque version) Tool interface: SK 40 Tool changer: 60-position chain magazine (large expansion stage) Equipment & accessories: Cooling: Internal coolant supply (IKZ) including paper band filter system Chip conveyor Measuring probe available - DMG TS 649 Documentation and key available Videos available

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Nlsdpfxezuyp Ej Ahksf Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2014, Drilling and dowel insertion machine Nlodjzuyn Iopfx Ahkef Manufacturer: Weeke Type: OPTIMAT ABD150 Year of manufacture: 2014 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Technical data: Nljdpfjzuyi Ssx Ahksf - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent - Pressing zone with heated tower pads (can be replaced with pressing rollers) - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units - Computer control for quick, easy and precise adjustment of the machine's main functions and units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, Edge banding machine with workpiece return system Manufacturer: HOMAG Type: PROFI KAR310/11/A20/S2 Year of manufacture: 2009 Nledezuyhuopfx Ahksf Technical data Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Nlodezuyqispfx Ahkjf Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 2005, Technical specifications: - Machining area: 2500x1000 mm - Travel range X-axis: 2980 mm Nlodpfx Ajzuxhtohkef - Travel range Y-axis: 1280 mm - Travel range Z-axis: 200 mm - Programmable speed in the X-axis: 25 m/min - Programmable speed in the Y-axis: 30 m/min - Programmable speed in the Z-axis: 22.5 m/min - Vector speed: 40 m/min - 16 spindles, 4000 rpm, 2.2 kW (10 vertical and 6 horizontal) - Electric spindle with 6.6 kW, 12000 - 18000 rpm, HSK-63 - Side tool magazine with 7 positions - Footprint (L x W x H): 6970x3000x2680 mm - Weight approx. 3295 kg

Condition: used, functionality: fully functional, Robust wire stitching machine Brehmer Polygraph 703/1 Stitching thickness up to 25mm Round wire No. 23-30 Flat wire No. I-V Staple spine length 12mm Stitching speed 155-215 staples/min. Electrical connection 400V/50Hz Nljdpfx Asxbf Iyehkef Weight 200kg

Condition: good (used), Paint casting machine, paint casting station Nsdsc R Iyajpfx Ahkslf -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Nlsdszuur Uopfx Ahksf Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Nljdpszg U R Iefx Ahkjf Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports Nlodpfxjzux Tis Ahksf - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: used, Year of construction: 2020, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: Nledpszux T Nofx Ahkjf - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Nljdszux Tcopfx Ahkof Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, CNC cylindrical grinding machine Lizzini IG-FL Year of manufacture: 2019 Condition: Absolutely like new Control system: Siemens 840D sl Equipment: - 2 external grinding wheels Nodpezmhumjfx Ahkjlf - 1 internal grinding attachment with C-axis and fully controlled B-axis Distance between centers: 1000 mm Distance between centers (vertical): 200 mm