Used Castowig 200 Gw for sale (16,524)

Condition: refurbished (used), Year of construction: 2014, operating hours: 2,269 h, load capacity: 2,000 kg, fuel type: electric, mast type: simplex, construction height: 1,300 mm, Manufacturer: BT Model: BT LWE 200 – low-lift pallet truck Drive type: Electric Ksdpfswzuwmex Ah Nsll Load capacity: 2,000 kg Year of manufacture: 2014 Operating hours: 2,269 Serial no.: 6071472 Mast data/forks Mast type: - Lift height: 54 mm

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Type: K-200 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Kedpfow Hc Spjx Ah Noll Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: Klsdpeuhm E Ssfx Ah Njl - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19981 Kedpfxsxt Dgrj Ah Njll Description:Handtmann VF 200 sausage stuffer for making sausages, equipped with automatic twister. The machine has been in operation until March 13, 2025 and has worked. It is ready for immediate delivery.

Condition: used, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 19095 Klsdpfxov U Sg Ho Ah Nsl Specifications: - 2013 model - Km: 6192 - Hours: 1644 - 2m2 vacuum sweeper - 4 wheel steering - 2 brush system - high pressure washer - 40 km/h - Ready for delivery Description: An owner who has operated his own property/parking garage since new. Vacuum container leaks a little water when it is not pressurized. The protective profile around the machine is rusted and needs to be replaced, rust water from this has discolored the plastic. The cable for the emptying lever return water is stuck, must be replaced/repaired. Some scratches/damage around the machine. For the most part, the machine is ok. Was in normal use until June 2024. Service carried out November 2023.

Condition: used, Year of construction: 2015, operating hours: 2,487 h, machine/vehicle number: 94xxxx, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21576 Specifications: 2015 model 2487 hours 10050 kg 34 kW Kedpfxoxp Awns Ah Nell Hydrostatic transmission Basket Tires (see pictures) 4x4 4 wheel steering Transport length: 6.30 m Width: 2.40 m Turn on all wheels Working height: 20 m Platform height: 18 m Range: 12 m Lifting capacity: 230 kg Overhang: 8 m Side shift on basket Control panel Ready for delivery Certified to June-2026   Description: We have a 2015 Manitou 200ATJ Telescopic Forklift for sale. Robust and efficient lift for demanding jobs in the field! The Manitou 200 ATJ is a powerful articulated boom lift with impressive reach and accessibility. Perfect for contractors, rental companies and industrial companies who need reliable access to heights, even on rough terrain. Everything works as it should and services are carried out continuously. Ready for delivery Hours: 2487 Own weight: 10050 Kw: 34 CE: Yes Model: 200 ATJ Teleskoplift

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Ksdpovxmy Nofx Ah Nell Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Kjdpfxox Dnb Us Ah Nell Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, machine/vehicle number: 6516248, Year of construction: 2017, operating hours: 3,585 h, lifting height: 1,900 mm, fuel type: electric, mast type: duplex, battery manufacturer: Hawker, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,150 mm, Empty weight: 880 kg Lifting capacity: 2.000 kg Maximum passing height: 147,5 cm Klsdpfxeu Thtmo Ah Njl Supply voltage: 24 V Remanufactured: Yes Tyre brand: Vorne: Vulkollan tandem Hinten: Vulkollan Transport dimensions (LxWxH): 1,96x0,77x1,475 Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 6464445, Year of construction: 2016, operating hours: 4,085 h, lifting height: 2,100 mm, battery capacity: 375 Ah, battery voltage: 24 V, Empty weight: 1.479 kg Lifting capacity: 2.000 kg Maximum passing height: 159 cm Supply voltage: 24 V Tyre brand: Vorne: Vulkollan Hinten: Vulkollan tandem Transport dimensions (LxWxH): 2,31x0,79x1,59 Kjdpfeqmc I Ajx Ah Nsll Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 6487624, Year of construction: 2017, operating hours: 2,450 h, fuel type: electric, battery manufacturer: Hawker, battery capacity: 260 Ah, battery voltage: 24 V, fork length: 1,150 mm, Empty weight: 571 kg Lifting capacity: 2.000 kg Supply voltage: 24 V Ksdpfx Ahou Thrvo Nell Remanufactured: Yes Tyre brand: Vorne: Vulkollan tandem Hinten: Vulkollan Transport dimensions (LxWxH): 1,74x0,725x0 Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 6794408, Year of construction: 2021, operating hours: 991 h, fuel type: electric, battery capacity: 400 Ah, battery voltage: 24 V, fork length: 1,150 mm, Empty weight: 836 kg Lifting capacity: 2.000 kg Kledpfx Asray Syoh Nol Supply voltage: 24 V Remanufactured: Yes Tyre brand: Tandem Schwerlast Transport dimensions (LxWxH): 1,95x0,73 Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 6626999, Year of construction: 2018, operating hours: 2,521 h, fuel type: electric, battery manufacturer: BT Classic, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,150 mm, Empty weight: 751 kg Lifting capacity: 2.000 kg Supply voltage: 24 V Reconditioned: Yes Remanufactured: Yes Tyre brand: Vorne: Vulkollan einfach Hinten: Vulkollan Transport dimensions (LxWxH): 1,88x0,73x0 Please contact Karl Leitner for more information Kledpfxeu Thrpo Ah Nsl

Condition: good (used), Year of construction: 1981, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow, snow pusher -Manufacturer: Schulte-Henke, Snowplow type RKS 200 DFG 4035 A -Sign length: 2000 mm -Plow height: 520 mm -with: Spring-loaded flap drive-over system -Recording: Dimensions see photo technical drawing -Plow: mechanically adjustable Klsdpeqxvwysfx Ah Nol -Attachment: to forklifts or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Kljdpfox S Hm Ijx Ah Nol Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 125 kg, empty load weight: 275 kg, construction height: 1,670 mm, total length: 1,180 mm, construction width: 735 mm, working height: 400 mm, Special work platform Kledpfsu U Nxbsx Ah Nol Technical condition: new Battery condition: new

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 48 h, load capacity: 250 kg, empty load weight: 2,782 kg, construction height: 1,998 mm, fuel type: diesel, total length: 5,324 mm, drive type: Diesel, arm reach: 8,500 mm, construction width: 780 mm, working height: 20,000 mm, Crawler work platform Technical condition: very good Battery condition: very good Kledpfx Ahewx Txqe Nol

Year of construction: 2005, condition: ready for operation (used), General Data Machine weight 3300 kg Control Unit Brand FANUC Model Series 21i-TB Main Drive Number of axis 2 Movement X-Axis Movement 185 mm Z-Axis Movement 370 mm This Takisawa TC 200 was manufactured in 2005. It features a standard turning diameter of 225 mm and a maximum of 340 mm. With X-axis movement of 185 mm and Z-axis movement of 370 mm, it also includes a 12-position turret. Consider the opportunity to buy this Takisawa TC 200 horizontal turning machine. Contact us for more information. Kjdpfxex D R Sps Ah Njll Application Types Turning

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, sheet thickness steel (max.): 2 mm, warranty duration: 12 months, working length: 6,400 mm, Immediately available Thalmann TZ 200 / 6.4 m TZ series single folding machine Working length: 6400 mm 6 machine stands Sheet thickness: 2.00 mm at 400 N/mm² Equipment: VFD (vertical force drive) Continuous control shafts Kljdpfx Ahewlq Naj Nel Manual crowning (optionally dynamic) 3D graphical control Backgauge 1250 mm Folding rails 10/10 and 17 mm Motorized backgauge, range 1250 mm with 6 fingers Electric slitter Automatic crowning and radius adjustment Curved folding beam Hardened tools in clamping and folding beam LED bending illumination M-Guard for remote diagnostics directly from the factory

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, repeat accuracy: 0.06 mm, empty load weight: 1,155 kg, number of axes: 6, Auction of a package of 4 KUKA KR 200 robots! The machines have been fully overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload: 200 kg Arm reach: 2,400 mm Number of controlled axes: 6 Working envelope: 38.6 m³ Positional repeatability (ISO 9283): ± 0.06 mm Range of motion: A1: ±185° A2: -142° / 0° A3: -120° / 148° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load): A1: 90 °/s A2: 85 °/s A3: 85 °/s A4: 117 °/s A5: 120 °/s A6: 195 °/s MACHINE DETAILS Controller model: KRC2 Weight per robot: 1,155 kg Noise level: < 75 dB Tilt angle: ± 5° Ambient temperature (operation): 10 °C to 55 °C Ambient temperature (storage/transport): -40 °C to 60 °C INCLUDED EQUIPMENT Manipulator KRC2 control cabinet Teach pendant Kjdpfx Ahjx Syktj Nsll Cable sets

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Klodpfx Ajx Sw Ezeh Nel Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: excellent (used), functionality: fully functional, working width: 2,060 mm, sheet thickness (max.): 3 mm, back gauge adjustment: motor-driven, Equipment: emergency stop, safety light barrier, Vimercati mechanical guillotine shear. - Cutting width: 2060 mm - Sheet hold-down cylinders: 11 units - Maximum cutting thickness for steel with Rm 410 MPa: 3 mm - Maximum cutting thickness for steel with Rm 600 MPa: 2 mm - Pneumatic rear sheet support Kjdpfx Ahexdr R To Nell Machine is currently in operation and fully functional. Equipped with motorized back gauge with manual control and display showing cutting dimensions. Machine comes complete with added safety guards and an operation and maintenance manual.

Condition: new, Year of construction: 2026, Description Double-sided grinding machine TS 200 SD P with extraction system, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Klodpfx Ahor Eqzfe Nol Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 - Speed (rpm): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Year of construction: 2019, We can now offer one Vertical Lift Modules from SSI Schaefer of the latest model. SSI Schaefer is the world's leading manufacturer of warehouse automation and their model of vertical storage lifts Logimat SSL is just like their other solutions, of the highest quality and standard. These vertical lift is configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Module is each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. Kodpfx Aendcbceh Nell These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. Available for immidiate delivery. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Maximum weight per tray: 200 kg Electronics: 25 A, 400 V

Condition: used, Year of construction: 2010, Suction nozzle diameter: 200 mm Rated airflow: 2262 m³/h Max. airflow: 3500 m³/h Filter area: 12.65 m² Cleaning system: vibration motor Chip disposal: 2 collection containers Collection volume: 330 liters Filter material: polyester needle felt Negative pressure at nominal flow: 2750 Pa Installation: mobile Approx. weight: 450 kg Motor power: 4 kW Power connection approx.: 400 Volt/50Hz Storage location: with customer Kjdpfx Ahox U Egxo Njll