Mounting plate with T-slots from cast steel - grey cast iron
Nx7hxn8d
T - plate from the plate field
Length 1170 mm
Width 1100 mm
Thickness 250 mm
-T-slots 48 mm
-strongly ribbed
Weight: approx. 1400 kg
good condition
2 piece available, quotation depending on the clamping table is all plate by a Plattenbohrwerk, many sliding blocks on all sides angular cut available.
See stock no: 55886 55887, 55888, 55889, feet to the align see bearing no. 56195
Cast iron bed
Length: 2210 mm
Pe2al
Width: 1500 mm
Thickness: 260 mm
With T-slots in both directions
Weight: approx 2,5 T
(4 similar pieces available)
diameter 670 mm
individually adjustable clamping jaws
height 90 mm
jaw height 90 mm
Be9qy2cx98
through bore 140 mm
bolt circle 235 mm
weight approx. 179 kg
Technical description:
- Saw inclinable up to 45° with angle reading
- Saw blade max. 500 mm
- Max. Cutting height at 90° is 175 mm!
- Motor power 7,5 kW/ 10 PS, braked
- Drive via double V-belt pulley
- Cutting width right 1.280 mm, with fine adjustment
- speeds; 2.800, 4.000 and 5.000 rpm
Bohr8uwu
- short cut table left, stroke approx. 1.350 mm
- short cut fence/linear fence extendable up to 3.000 and with 2
folding stops
- With table extension
- Automatic star delta switch
- Incl. wide p...
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design
-Middle bearing: for Ø 50 mm shaft
-made of: gray cast iron
-Number: 7x bearings available
-Price: per piece
-Dimensions: 92/70/H85 mm
Fb3tr09
-Weight: 2.0 kg/piece
Buderus 455-510 kW oil / waste oil, gas boiler (Cast Iron Sectional Boiler !)
Sale at an extraordinary introductory price! Buderus Logano Ecostream GE 515/510 KW cast iron sectional boiler, 2000kg!
- The gas boiler can be put into operation immediately in a very good condition with complete documentation!
- with Logamatic 4311/12 control,
- Weishaupt G5 / 1- D with gas burner,
whose power can be varied, 175-940 KW, but we can also provide a combi burner that can operate in gas or oil mode at t...
Straightening and welding plate, cast iron is strongly ribbed
Length 1000 mm
Width 750 mm
110 mm thick
Working height 810 mm
Bc9v0flqe7
Plate thickness without ribs 34 mm - 3 piece adjustable support points table with metal base
-simple metal base
Weight 280 kg
Cast iron bed STOLLE
Length: 6000 mm
Width: 2500 mm
Thickness: 350 mm
10 T-slots - dimensions: 50 x 28 mm
Slots spacing: 250 mm
Weight: 13 T
Su3sec
diameter 400 mm
Yxd7ygcwf
passage / inner diameter 100 mm
4 individually adjustable clamping jaws
mounting short taper DIN55022 size 6
taper diameter 106 mm
bolt circle of the 4 fixing screws 133.4 mm
height approx. 100 mm
height of the jaws 58 mm
screw size M12
weight approx. 69 kg
Karl Krause cast iron bookbinding guillotine
Production Germany.
Guillotine in very good condition, ready for production.
The structure is fully made of cast iron for stiffness and repeatability of the cut.
Cutting length approx. 120 cm
Perfect for bookbinding, corrugated cardboard, leather and canvas.
Front cutting stop with millimeter scale.
Foot material clamp.
Table margin
HSS knives, very tall.
Jofrdfg7
Weight over 400 kg
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design
-Middle bearing blank: for Ø 35 mm shaft
-made of: gray cast iron
-Number: 12x stock available
-Price: per piece
Mswpw8
-Dimensions: 70/52/H75 mm
-Weight: 1.2 kg/piece
Seamer is in good working conditions. Equiped with tooling for 99mm, 73 mm and 84mm cans.
Height from 25mm to 150 mm.
Iwg9ar7
Speed up to 150 cans per minute.
Mounting plate with T-slots from cast steel - grey cast iron
Cc0eioyg
Length 1900 mm
Width 1600 mm
475 mm thick
Thickness approx. 130 mm
Foot size 1800 x 1890 mm
-Clamping surface with aufgeschrubter T - Groove plate steel, thickness 70 mm
-T-slot distance 22 mm = 300 mm
-Parallel to the bottom of the milled upper side = clamping surface
-Machined bottom also the bridges rest flatly and wear
-Very high load possible through the strong ribbing and the structural editing
-Ideal as a press table, c...
Cast iron clamping cube
T-slots dimensions: 58 x 36 mm
Glxdw3l
Cube dimensions : L 2000 x H 1500 x Depth 1200 mm
4 faces with T-slots
Total height with enhances angle plate: 2050 mm
Total height with rail: 2700 mm
Weight: approx 7 T
Hello,
For sale Casting ladle for cast iron with a gear.
Quantity: 2 pcs.
Technical data:
Btpg3n7kum
Ladle type - pouring
Capacity - 5000 kg
Drive wheel diameter - 1000mm
The ladle without lining.
Weight: 1 piece 1580 kg / 1 piece 1379 kg
We also sell other casting ladle on other auctions.
I can send photos.
The price is for 1 item.
5 Cast iron floor plates size approx. 1530 x 3050 x 406mm.
O7l3p
Lifted and stacked ready for loading
Cast iron angle
Clamping surface size H x W 1000 x 800 mm
70 mm thickness of plate
Yq8shc
Depth 600 mm
Stand area 8000 x 600 mm
T-slots 50/30 mm
with:
-6 T-slots
used, in good condition
Make ASQUITH UK
YOP 1989
Technical data
Nlgqt
Length4000 mm
width 165 mm
Height140 mm
Quantity T-slots1
Distance T-slots / jump 0 mm
T-slot sizeT 30
Weight per plate ca.635 Kg clay
Number of identical pieces22 units
Clamping plate with T-slots made of cast steel and grey cast iron
length 2570 mm
width 1800 mm
thickness 237 mm
plate thickness 94 mm
base 1800 x 1890 mm
- clamping surface with T-slots 28 mm, distance = 300 / 450 mm
- Top side milled parallel to the bottom side = clamping surface
- Milled underside, also the webs lie flat and support the load
- Very high load capacity possible due to strong ribbing and load-bearing machining
- Hole grid with ejector plungers in the table surface (grid dimension...
Cast iron bed - No 1
Length: 6000 mm
Width: 1500 mm
Thickness: 350 mm
T-slots numbers: 5 T-slots
T-slots dimensions: 60 x 36 mm - Height 60 mm
2 beds available (Possibility to assemble bed No 1 + bed No. 2
Buspynx0qi
to get an overhall surface of 6000 x 3000 mm)
Weight: approx 7 T
Dimensions:,
1200 x 1000 x 140 mm,
with stable base 800 mm total height,
Bgvhe0gtj2
Remark:,
Storage compartment and rear wall made of VA sheets,
6 tables each 15' x 6' (approx 4570mm x 1830mm)
Hoa3hgy8a
Cast iron angle
Clamping surface size 800 x 250 mm
778aofo
70 mm thickness of plate
Depth 500 mm
Stand area 250 x 500 mm
with:
-5 pieces horizontal T-slots 38/22 mm
used, in good condition
Make
Yop
Coruwr9c
Dimensions
Length 1450 mm
Width 1250 mm
Height 3000 mm
Clamping plate of cast steel - grey cast iron
1890 mm
Width 1785 mm
400 mm thick
Nxllq3mh
Thickness approx. 70 mm
Foot area 2000 x 1890 mm
-Wind holes 24 and M 20 mm
-Parallel to the bottom of the milled upper side = clamping surface
-Machined bottom also the bridges rest flatly and wear
-Very high load possible through the strong ribbing and the structural editing
-Ideal as a press table, comes from a 200 ton press
Weight: 3500 kg
good condition
Force cylinder: 120-400 to
Capacity: 3500-6000 kg/h
Power: 22 kW
Installation surface: 5,3 x 3,5 x 2,9 m
Obp2p
Measuring plate on steel frame L2770 x W1100 x H310mm
Measuring table with cast iron plate
Dwmjam
Plate dimensions:
L2770 x W1100 x H310mm
Total height:
785 mm
Shipment via forwarding agency possible, please contact us.
More articles - new and used - you will find in our store!
International shipping costs on request!
Measuring plate one-piece, cast steel
L x W 7,500 x 3,000 x 350 mm
Adjustable feet flexibly available
Manufacturer Meuselwitz Casting
Crfdlmk0
Cast iron T-slot clamping table (formerly press table)
Technical data:
length 1520 mm
width 850 mm
0oqicayc
height 980 mm
with
- 6 T-slots
Cross running Lg. 850 mm
Groove size 38 / 22 mm
used, in very good condition
Make Leifeld Ahlen Germany
E29q8v2
Yop
Cleaner DOZAMET OWT 400A made in Poland in 1988. The cleaner is offered with a filter chamber. A few years ago, the machine was thoroughly refurbished.
Technical specifications:
- useful capacity of the working chamber: 0.35 m3
- minimal dimensions of castings: min. 25 x 25 x 25 mm
- maximum dimensions of castings: 400 x 400 x 400 mm
- minimum wall thickness: 5 mm
- minimum unit weight of cleaned castings: 40 kg
- maximum casting load weight: 400 kg
- cleaning time for one load of iron castings...
Chiron FZ 18 Siemens Brushless servo motor, used, general overhaul price on request, type: 1FT 5072-01671-2-Z, number: YF VN47 7363 01 001 EN 60034 You can also view our terms and conditions on our website.
Pud99m
Inquiries please only by mail!
Chiron FZ 18 Siemens Brushless servo motor, used, general overhaul price on request, type: 1FT 5064-0AG71-2-Z, number: YF W812 1598 01 001 EN 60034 You can also view our terms and conditions on our website.
Bigd9ja2er
For further technical data please contact the seller.
Psg7vbvx
Professional all-terrain mower with Variospeed. Year 2018 from unused with full warranty With two blade speeds and five gears, the meadow mower AS 73 4T B&S copes with steep slopes. dense vegetation and large areas. With this all-mower you have the choice via Variospeed: the faster blade speed to achieve a finer mulching result. the slower one for higher torques in harder applications - an indispensable advantage for infrequently mown areas. Efficiency is ensured by the large cutting width of 73...
round bar steel: 40 mm
square edge steel: 38 mm
angle steel: 100x100x12,5 mm
pressure capacity max.: 50-105 t
Number of working hours: 1426 h
total power requirement: ca. 6 kW
weight of the machine ca.: 2,8 t
Nt0oj
space requirements of the machine approx.: L:2,75x1,3x1,85 m
Combined Section Steel Shear hydraulic also suitable to cut wavy profile.
- hole punch: 50 t with max. 37mm in 16mm sheet
- edge shear: 45t with 76x76x8 sheet
- notching: 45t with 76x50,8x9,5mm sheet
Attention! Machine is w...
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor
Nv3bv
-Motor comes from a Weisser Heilbronn Type 29 CNC lathe
-Speed: 2000 rpm
-Power kW
-Construction: B5
-Shaft diameter: Ø 30 mm
-Number: 1 piece of motors available
-Price: per piece
-Dimensions:
-Weight: 20 kg
gebr. AS-Motor mulching mower in basic equipment Briggs + Stratton engine 4,2 kW / 5,7 PS Vario wheel drive Cutting width 51 cm
Bt09krdutq
Extraction fan 5.5 kW
Bu7ff8zcz3
3-fold cutting height adjustment,storage location:zero
Bvhsmuni98
13,5 hp Briggs&Stratton 4-stroke OHV engine with oil pump, oil filter, petrol pump and ì electric start, hydrostatic transmission with lock, cutting width 800mm, rear discharge, ì ace tyres, large climbing capacity two-wheeler, hydrostatic drive, rear discharge,Storage location:AS 800
Ifafgdulg
Machine number: 2021-233
Adam Power Systems GmbH
thank you for your interest in our machines, please have a look at our other offers,
Nothing found ? then please ask us
*****
Technical Data :
-engine Scania DI16 42 M. Marine
- Operating hours : only 5500 hours
Bu2v89pxdo
-Year of manufacture :2011
- HP :600
-Kw 441
-RPM 1800
Net price plus VAT
Delivery max. 500€ possible nationwide.
for further questions we are at your disposal
*****Adam Power Systems GmbH*****
***power unit of all kind***
Falck...
For sale stands a Deutz engine air cooled in very good condition.
Technical data :
Engine : Deutz 6 cylinder turbo diesel air cooled
Type number : BF6L913C
Power : 115 KW / 156 PS at 2150 U/Min.
Condition : very good
Location : 24145 Kiel
Pbz8n
Price : 3200,-€ net plus tax.
Delivery against surcharge is possible
Pendulum saw Iron
140 mm cutting height
With wooden frame
Buievwpxbk
For sale 1 pc. vertical multistage centrifugal pump, Shimge (Grundfos) BL16-12, 12 stage high pressure in-line pump, booster, priming pump, stainless steel, 3 ~ 15 kW-50Hz, 8-16 m3 / h, 180m.
3 ~ 18 kW, (25 HP) 8-20 m3 / h, H = 218m / 60 Hz, 230 / 460V 2Δ / Δ, 3530 rpm.
3 ~ 15 kW, (20 HP) 8-16 m3 / h, H = 180m / 50Hz, 230 / 460V 2Δ / Δ, 2940rpm.
DN1 = DN2 = 60 mm with flanged connectors.
Weight: 184 kg.
Bhmhahn089
Availability: 1 item
Net price: 1100.- Euro
Parcel delivery by appointment.
Please...
2-stroke engine,Stock location:null
Bvhqiwbgi0
All-wheel
The all-wheel drive ride-on mower with more ground clearance for use on steep slopes and difficult terrain Cutting width 90 cm Engine B&S Professional Series 8 4T engine, 2-cyl. displacement 724 cm³ Maximum power 20.1/27.0 kW/hp Rated power 16.5/22.4 kW/hp Rated speed 3300 rpm. Drive, 4WD permanent Stepless hydrostat Differential lock Automatic parking brake Cross blades Rear discharge Closed mowing deck Surfing mowing deck Cutting height 80 - 135 mm Fuel tank capacity 15 l Seat suspen...
Machine number: 2021-228
Adam Power Systems GmbH
thank you for your interest in our machines, please have a look at our other offers,
Nothing found ? then please ask us
*****
For sale is a diesel engine in mint condition - special offer for purchase of the two units together-----
Engine : Volvo Penta 6 cylinder turbo diesel
Type number :TW D 63 OME
HP 190
Kw 140
Rpm 2500
Operating hours : only 4300hours
Year of manufacture : 2005
Price net plus tax
Pbkdh
Immediately ready for use
Delivery ma...
For sale is a used Deutz engine air cooled in very good condition.
Technical data :
Engine : 6 Cylinder Turbo Diesel
Type number : BF6L513 R
Power : 167 KW /