Used Carton Printers for sale (1,611)

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 Layer thickness: 20-80 μm Manufacturing speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage duration: Laser 1: 501 hours Laser 2: 503 hours Additional equipment: Inox 200 lifting device Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutting unit NA 7-11 H CL EU Zone 22 Dimensions: 800 x 480-570 x 755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Frequency: 50 Hz Housing: Steel sheet Hfedozh Dp Nepfx Agtel Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder automatic sieving station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer an untested ProJet 3D printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Printing Modes: HD – High Definition UHD – Ultra High Definition Net Build Volume (xyz) HD Mode: 298 x 185 x 203 mm UHD Mode: 127 x 178 x 152 mm XHD Mode: n/a Resolution: HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD Mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimension Accuracy depends on build parameters, part geometry, part placement, and post-processor settings. Email Notification: No Build Materials: VisiJet® EX200 Build Material: Durable solid material with a long service life VisiJet® SR200 Build Material: Cost-effective multipurpose material. Available in natural, blue, or gray VisiJet® HR200 Build Material: Available in blue, specifically developed for investment casting applications Support Material: VisiJet® S100 Support Material: Non-toxic wax material for melting away the supports without manual intervention Power Supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (LxWxH): Printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and machining optimization tools Extensive part file editing tools Automatic support generation Job statistics Network Compatibility: 10/100 Ethernet interface Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Hsdpozdnnusfx Agtofl Operating System: Windows XP Professional, Windows Vista, Windows 7 Supported File Formats: STL and SLC Ambient Temperature: 18-28 °C Noise Level

Condition: excellent (used), Stratasys 3D Printer Dimension Here we offer a Stratasys 3D printer, Dimension model. Stratasys 3D Printer Dimension The Dimension 3D printer is part of Stratasys' Design Series. Manufacturer: Stratasys Type / Printing Technology: FDM (Fused Deposition Modeling) Hsdpfx Aozdnpfsgtsfl Build Volume: 20.3 x 20.3 x 30.5 cm Printable Material / Filaments: original ABSplus spools, or other ABS or HIPS materials Dimensions and Weight: 68.6 x 91.4 x 104.1 cm; 127 kg Build Platform: Plastic; reusable Software / File Types / Operating Systems: CatalystEX / STL / Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista Special Feature: ideal for complex 3D models with a resolution of 0.178 mm or 0.25 mm layer thickness. Type: Dimension Condition: used Scope of Delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. Hjdpfx Agoyb Tw Rjtsfl AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: ready for operation (used), Year of construction: 2014, An industrial large-format digital printer is offered. Max. print area: 3020mm x 2020mm, compressed air requirement: 7-10bar (100-150PSI), short-circuit withstand strength: 10kA, control: PLC. Equipped with UV curing system, vacuum table. Weight: approx. 3750kg, overall dimensions X/Y/Z: approx. 5950mm/2900mm/1550mm. Inspection possible by arrangement. Hedpjzcfibofx Agtsfl

Condition: used, Year of construction: 2022, Cartoner including hot melt applicator. This device has a low operating hour count. It is particularly suitable for products that can be fed into the carton from the side. Hjdpfx Aovb E Evsgtsfl

Condition: good (used), Year of construction: 2006, 8 color (7 mounted) Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm Hfjdpen Utdqofx Agtol This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Year of construction: 2006, condition: good (used), 8 color Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm Hedpfen Utctox Agtofl * Max. cup diameter: 130 mm * Max. cup height: 160mm This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: excellent (used), Stratasys Objet Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the creation of prototypes from three materials, as well as simulating overmolding or equipping build plates with selected models. Using the triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model materials: Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Tooling and fixtures Architectural models Medical models Injection molding molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the full model size (only for rigid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) Hfjdpozh Dqyjfx Agtsl (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), Automatic Wrap-Around Cartoning Machine CAMA – Stainless Steel Automatic wrap-around cartoning machine CAMA, designed for the automated secondary packaging of products in cardboard boxes, forming the box directly around the product group during a continuous end-of-line process. Manufactured by CAMA, the machine integrates product feeding and grouping operations, cardboard feeding, box forming, folding, and closing, providing an automated solution for high-production industrial lines. The wrap-around system allows the packaging to be formed from a die-cut cardboard blank, wrapping the previously grouped product and creating a box ready for palletizing, storage, and distribution. MAIN FEATURES -Manufacturer: CAMA -Type: Automatic Wrap-Around Cartoning Machine -Application: Secondary packaging -Wrap-Around box forming system -Automatic product feeding -Product grouping and positioning -Automatic cardboard feeding -Box forming around the product -Automatic flap folding -Automatic box sealing system -Continuous industrial operation -Integrated conveying system -Control panel / HMI -Robust industrial construction -Perimeter enclosure with safety guards -Integrable into automated end-of-line systems PROCESS Products from the production line automatically enter the CAMA cartoning machine, where they are organized and grouped according to the configured packaging format. Simultaneously, the machine takes a die-cut cardboard blank and positions it in the forming area. The grouped product is placed on the cardboard, and through various mechanisms, it is folded around the product group. Subsequently, the flaps are closed to create a fully formed wrap-around box with the product inside. Hjdpfxjzbid Ho Agtjfl It can be integrated with: Filling and closing machines Labeling machines Conveyors Inspection systems Product grouping machines Automatic palletizers Pallet wrapping machines Complete end-of-line systems APPLICATIONS Particularly suitable for the food industry, canning companies, beverage manufacturers, and other packaging plants that require the automation of secondary packaging. Depending on the format and installed configuration, it can work with cans, jars, bottles, trays, packs, and other packaged products, grouping them in different configurations within cardboard boxes. CAMA's wrap-around technology provides a compact and automated solution for grouping, forming, and cartoning operations within high-production industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, type of input current: AC, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, 6x HD2500 plus Very good condition Hodpfx Agoyb R E Sstofl

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: Hfodpfstp Up Esx Agtol • 2 build frames • Hydac water cooler Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: used, Stratasys Objet Objet30 Prime V3 + Cleaning Glovebox Technical specifications: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Hfjdpozgcqcsfx Agtol Model materials: Transparent, rigid (VeroClear) Rigid, opaque, white (VeroWhitePlus) Rigid, opaque, blue (VeroBlue) Rigid, opaque, black (VeroBlack) Rigid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: excellent (used), Here, we offer you a Stratasys Objet 3D printer. The Objet Connex 500 is the groundbreaking multi-material 3D printer from Objet. With a large build volume of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material inkjet technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex 500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent, and standard to ABS engineering plastics. Excellent productivity The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue separate model elements together • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - allows printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of uninterrupted capacity • High speed - simultaneous printing of multiple items from different materials; models cure during printing; models can be processed immediately after printing Hjdpjzdnplefx Agtsfl • Easy-to-remove support material for complex geometries • Office comfort - quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. According to the last operator, it is in working condition. No functional test has been carried out by our company. Year of manufacture: 2010 Type: Objet Connex 500 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2016, The Durst Rho 512R is an industrial super-wide-format UV inkjet printer designed for high-volume production of banners, mesh, textiles, billboards, and other flexible media. Four colours 5 meter UV digital printer. 600.000m² Hsdpfx Agszil Naetsfl In production Decommissioning and loading on truck can be organized. Installation and training available upon request. Very good status, under Durst service contract For further specifications please refer to enclosed data sheet. Key Technical Specifications Specification Value Printing technology UV inkjet, roll-to-roll Maximum media width 5.2 m (204.7 in) Maximum print width 5.0 m (196.8 in) Printheads Durst Quadro Array 12M Drop size 12 picoliters Resolution Up to 900 dpi (some later documentation and Plus models state up to 1200 dpi) Maximum production speed 350 m²/hour Technology Variodrop variable droplet technology Ink type UV-curable Rho Roll Ink (VOC-free) Ink channels CMYK standard; optional Light Cyan, Light Magenta, White (configuration dependent) Roll capability Up to three 1.6 m rolls simultaneously Printing mode Continuous unattended roll-to-roll production Textile option Available for mesh without liner Border cutter Integrated

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Hfjdpszixziefx Agtsl Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals Hjdpovu Syyjfx Agtsfl 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Arburg Type: Arburg Freeformer 300-3X Additive manufacturing of complex functional components With high-temperature option The new, larger freeformer 300-3X processes three components in ARBURG's freeforming process (AKF) and enables – for the first time worldwide – the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation "300" refers to the available component carrier area in square centimeters. Compared to the freeformer 200-3X, the build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters. "3X" always refers to the three axes of the component carrier that can move in the x, y, and z directions. For additive manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Hsdpfx Aozd Tiwsgtsfl Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a 3D SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows even large models to be produced without prior division. Furthermore, the large base area increases productivity when printing many small models in a single print job. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinters, operate using a layer-by-layer process based on the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unsolidified powder supports the parts during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Fully automatic (automated setup and self-monitoring, automated powder loading, automated recycling and powder removal, locking binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Hedpfx Agszdyxrotefl Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special setup requirements: None Type: ProJet 660 Pro 3D printer Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2022, condition: like new (used), Zebra ZE511 Thermal Transfer Print Engine Model: ZE51143-L0E0000Z Year: 2022 Hfedpfx Agjzpy Abstel Brand new, unused, ex stores stock (open box)

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: Hsdpfx Agev Iy H Istjfl M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: excellent (used), German RepRap 3D Printer Here, we offer a German RepRap 3D printer. The X1000 from German RepRap is a large-format 3D printer that produces objects in industrial quality. 3D Printer Data Sheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standard (PLA, ABS, PP ...) Technology: Fused Deposition Modeling (FDM/FFF) Pre-assembled: n.a. Dimensions: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Hfedpfx Aezd Td Uogtel Nozzle diameter: 0.4 / 0.6 mm (in.) Minimum print density: n.a. Printing speed: 150 mm/s XY precision: XY: 20 µm Max. volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Additional features: Touchscreen Type: German RepRap X1000 Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Hjdpfszx Dwnox Agtjfl Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Hfsdpfxjux Sfzs Agtol Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, functionality: fully functional, Fully operational printer. Model material licences for model materials type : ABS , PC, Ultem 9080 Hjdeyzzmbjpfx Agtsfl