Used Carrying Bag for sale (5,432)

Condition: used, Year of construction: 2023, Coperion Bag House 5, Barkerbille Fan, Heat exchanger,AE Autel SFNBB184F01 Air Pneumatic Filter Receiver, Bag filter Exhaust Fan Sales are conditional subject to seller approval. Successful bidders will be notified within 2 working days. Ppedezl Uaaopfx Amyew

Condition: ready for operation (used), Year of construction: 2004, A HD Wiegetechnik multihead weigher with a Deltapack vertical form fill and seal machine is available. 1) HD Wiegetechnik HDW 10 3.5 multihead weigher, year of manufacture: 2004, hopper volume: 3.5l/head, weighing heads: 10, controller: MD 400 E. 2) Deltapack DE 420 FU vertical form fill and seal machine, year of manufacture: 2004, max. film width: 740mm, longitudinal seal length: 540mm, cross seal length: 430mm, sealing jaw width: 450mm, machine dimensions X/Y/Z: approx. 2300mm/1550mm/1800mm. Documentation available. An on-site inspection is possible. Ppodpjznx Hvjfx Amyow

Condition: good (used), functionality: fully functional, REF: MM6465 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Psdpeznux Ujfx Amyjpw Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-22. Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left. PLEASE NOTE - There are 2 x units available for sale (4,800 EUROS/unit).

Condition: new, Year of construction: 2025, functionality: fully functional, Sales only within Germany and Austria!!! Ulma FM 300 C X (WASH DOWN VERSION) The ULMA FM 300 C X was designed to package fresh food in a protective atmosphere (MAP) using barrier film (BDF). This machine produces hermetically sealed "pillow packs" which are then shrunk in a hot air tunnel. Technical specifications Model: FM 300 C X Condition: New Year of manufacture: 2025 Performance: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging type: Barrier shrink film pouch Machine equipment Length of infeed conveyor: Free infeed section 2490 mm Equipment features ✅ Machine in wash-down version ✅ Motorized film roll holder (max. film width 900mm) ✅ Film end sensor ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Machine suitable for barrier shrink film and laminated film ✅ Sealing bar with double teeth for mono films Psdpfxszntrto Amyepw ✅ Independent compression sponge for controlling the package volume ✅ "No product / No bag" function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analysis device Dannsensor MAP Check 3 O2 & CO2 gas save Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,105 × 1,465 × 2,060 mm Shipping weight: 1570 kg (including transport packaging)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: XKMP20250407, We offer this brand-new paper bag / bakery bag / kebab bag machine, manufactured in 2025. Pedjzmw Atopfx Amyopw The machine has been run very little – it was only set up and tested – and is in like-new condition. Machine designation: V-bottom paper bag making machine Manufacturer: Ruian Xinke Machinery Co., Ltd. Model: XKJD-400 Serial number: XKMP20250407 Year of manufacture: 2025 Condition: very good (very little use – like new) Functionality: fully functional Disassembly and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2023, functionality: fully functional, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! Ulma FM 305 The ULMA FM 305 automatic flow-pack machine was specifically designed to package fresh products in multi-layer films under a modified atmosphere (MAP). This machine produces hermetically sealed “pillow-pack” flow-packs in a pillow format. Technical Specifications Model: FM 305 Condition: Showroom machine (fully functional) Year of manufacture: 2023 Performance: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging type: Flow-pack Machine Equipment Infeed conveyor length: Free infeed section 3000 mm Equipment Features ✅ Motorized film roll holder (max. film width 700mm) ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer / labeler ❌ Double film roll holder Ppodpjzmvw Nofx Amyew ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross-sealing bar made of stainless steel with Euro-hole cut ✅ Squeeze sponge for controlling the pack volume ✅ No product / no bag function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analysis device Dannsensor MAP Check 3 O2 gas saver Documentation & Operation Language (documentation & HMI): German (other languages upon request) Dimensions & Weight External dimensions (L × W × H): 6,150 × 1,180 × 1,960 mm Shipping weight: 1611 kg (including transport packaging)

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², volume flow: 50 m³/h, total width: 2,450 mm, total length: 8,500 mm, total height: 9,000 mm, warranty duration: 12 months, Equipment: documentation/manual, BAG FILTER - GALVANIZED STEEL STRUCTURE AIRFLOW RATE m³/h 50,000 FILTER FABRIC CLEANING VIA AIR JET WITH CONTROL UNIT FILTER FABRIC AREA m² 512 No. 04 ATEX-CERTIFIED ANTI-EXPLOSION PANELS FILTERED MATERIAL DISCHARGE - SCREW CONVEYOR - ROTARY VALVE UPPER GUARDRAIL - SAFETY LADDER CONTROL PANEL Ppjdpfx Amozfiy Ioyow No. 01 ELECTRIC FAN - kW to be defined with the user

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during a company liquidation. Flowpack Machine ITALDIBIPACK Dibiflow 500 – Year of Manufacture 2021 – Excellent Condition For sale is a high-quality flowpack packaging machine from ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in excellent, well-maintained condition and is ideal for the efficient packaging of various products in tubular bags. Technical Data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Power connection: 400V – 3Ph + PE + N – 50/60 Hz Power: 4.3 kW Pjdpfx Asxw S Ixjmyjpw Weight: approx. 500 kg Features & Equipment • Robust stainless steel construction • High-quality sensors for product and film detection • Adjustable guide rails for different product widths • Clean, modern control and drive technology • Ideal for food, non-food, industrial products, and more • CE marking • Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors, and the entire mechanical assembly are in very good condition (see photos). Price Negotiable – €15,000 + €4,000 for printer.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, Equipment: documentation/manual, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) Ppedpfx Amsxlzr Ajyew - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Our state-of-the-art VFFS packaging machine is a true all-rounder, specifically designed to optimally support companies that demand the highest quality standards. With exceptional build quality and a wide range of applications, our machine features intuitive operation that streamlines your packaging processes. The highly powerful motors and user-friendly color touchscreen control system provide maximum flexibility during format changes and significantly simplify your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic infeed systems, including weighing solutions, which can be retrofitted according to your requirements. If you want to optimize your packaging processes with robust productivity and high quality, Impuls Packaging is your ideal partner. Machine features: 1. Single film unwind 2. Individually servo-driven sealing jaw 3. Three servo drive controllers 4. HMI control panel 5. Two independent temperature controllers 6. Housing made of stainless steel 304 7. Documentation in the local language 8. Registration mark control 9. Programmable bag length 10. Vertical product flow 11. One format set is included in the price. Technical parameters: 1. Product length: L50-290mm 2. Product width: W80-200mm 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) Ppjdpfx Aewlgnremyjw 4. Maximum film width: 420mm 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flow pack bag 2. Stand-up pouch (classic flow pack bag with side gusset – available as an optional extra)

Condition: used, Year of construction: 2009, machine/vehicle number: 266, Beutel-Einschweißmaschine / Bag sealing machine Vision Pack Visionbag MF060111 Baujahr / Year 2009 - Serial-No. 000266 Produktion pro Minute 20 Stück / Production uop to 20 pcs/minute Produktabmessungen / Product dimensions: Breite / Width min. 160mm - max. 250mm Länge / Length min. 100mm - max. 360mm Stärke/Dicke / Thickness 15mm Verwendbare Folien: Polyethylen, transparent oder bedruckt (Version mit doppelter Lichtschranke). Stärke max. 30 micron. Films that can be used: polyethylene, transparent or printed (version with double light barrier). Thickness max. 30 microns. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ppjdpfxout Tipo Amyjw Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Pedpfjy Urtfjx Amyjpw Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2002, Description to follow! Psdpfx Ajwugmmsmyepw

Condition: excellent (used), Year of construction: 2008, Description to follow! Ppjdpfxsyrhmbj Amysw

Condition: used, Year of construction: 2000, O F F E R We can offer you, without obligation and subject to prior sale and errors, the following ex stock: H U G O – B E C K Flow Wrapping Machine Type FLEXO 400 Year of manufacture: approx. 2000 Serial no. 12131 _____ Working height: 850 mm Product dimensions: 55-400 mm width 2-150 mm height 80-unlimited mm length Pedpfx Aewugmtemyjpw Max. output: 20 m/min 60 cycles/min Machine length: 2000 mm Machine width: 1450 mm Connected load: 3 kW Packaging films: PP, PE, Polyolefin Weight: 650 kg Machine dimensions: 2,140 x 1,450 mm Accessories / Special equipment: • Cross-sealing unit with permanently heated profile sealing element for long service life and secure seals • Side sealing unit, mechanically controlled, permanently heated sealing element for stable seals • Extremely short changeover times without tools • User-friendly control elements • Compact footprint We would also like to point out that, if interested, we have similar packaging machines in stock on site! Condition : Very good Please click here shortly for a video of the machine: Delivery : Ex stock - as inspected Payment : Net - after receipt of invoice

Condition: used, Film Packaging Machine, Bagging Machine, Vertical Form-Fill-Seal (VFFS) Packaging Machine, Hastamat R 250, Used Machine Manufacturer: Hastamat Verpackungstechnik GmbH Model: R 250 Year of Manufacture: 1999 Power: 5 kW Supply Voltage: 230/400 V, 50 Hz (requires a 3-phase industrial power supply) Bag Width: 70–250 mm Bag Length: 100–400 mm Capacity: Up to 160 bags/minute Overall Dimensions: Pedpfx Amezktxlsyepw Width: 2600 mm Depth: 1780 mm Height: 2500 mm

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % Pjdelhqndjpfx Amyepw - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: new, Year of construction: 2026, functionality: fully functional, Industrial filtration unit with FI450 filter cartridges – 12,000 m³/h Industrial filtration unit with filter cartridges, model FI450. The system operates under negative pressure and is designed for efficient dust extraction and filtration in demanding industrial environments. The unit is equipped with 35 filter cartridges made of antistatic polyester and an automatic cleaning system with counter-flow compressed air blowing, which ensures efficient cartridge cleaning and reliable continuous operation. Main technical features: Model: FI450 Airflow: 12,000 m³/h Operation under negative pressure Suitable for outdoor installation Design in accordance with EN 16770 standard 35 filter cartridges made of antistatic polyester Cartridge dimensions: Ø 144 × 1,220 mm Total filtration area: 157 m² Filter material weight: 270 g/m² Cleaning system with counter-flow compressed air blowing Air inlet diameter: Ø 450 mm Pressure: 280 mm H₂O Noise level: 75 dB(A) The unit is equipped with: A settling chamber to reduce air velocity at the filter inlet and prevent damage to the filter cartridges from larger particles or sparks, thereby extending their service life A backflow damper to prevent dust from returning to the production area An automatic powder extinguishing system Three dust collection containers, each with a nominal capacity of 180 liters One high-performance fan, designed for operation with clean air A premium-grade S1 electric motor, IP55 protection, with a power of 15 kW A control cabinet with a connection for automatic start and stop Technical data: Dimensions: 3,500 × 1,100 × 2,440 mm Weight: 1,670 kg Installed power: 15 kW Electrical supply: 400 V / 50 Hz Dust collection: 3 containers of 180 liters each Number of filter cartridges: 35 Filtration area: 157 m² Airflow: 12,000 m³/h Air inlet diameter: 450 mm Price: 19,210.00 EUR For additional information on availability, delivery terms and technical documentation, please contact us. Ppjdpfozlrr Tjx Amyjw

Condition: used, Year of construction: 2021, functionality: fully functional, Used industrial dust extraction system made of stainless steel (INOX) – 50,000 m³/h The dust extraction system is suitable for companies in the wood industry, carpentry workshops, sawmills, and production facilities where a powerful and reliable dust extraction and filtration system is required. Ppedpezlq Tpjfx Amysw Main technical features: * Airflow: 50,000 m³/h * Positive pressure filter system * Made of stainless steel (INOX), not galvanized sheet metal * Piping included * Previously used for extracting oak sawdust * Used and fully functional industrial system The system is designed for the efficient collection and extraction of sawdust, wood dust, and other particles generated during wood processing. It ensures reliable operation even in demanding industrial environments. Suitable for: * Wood industry * Carpentry and joinery workshops * Sawmills * Wood processing production facilities * Central dust extraction systems For additional information regarding the condition, dimensions, included components, and price, please contact us.

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 04/2003, loading space length: 9,380 mm, loading space width: 2,480 mm, loading space height: 3,300 mm, Equipment: ABS, Berdex OV 1218 | Car Transporter | Mobile Workshop | Team Lounge | LBW Internal No. for inquiries: 0726566 Ppodpfx Aezllzzjmyjw * Condition: very good * First registration: 04/2003 * Aluminum work platforms on the left and right * Permissible total weight: 30,000 kg * Unladen weight: 10,420 kg * ABS * EBS * 2-axle air suspension * Interior lighting * 2 refrigerators * Lift tail lift with access ramps Dimensions (cargo area/loading area) Cargo area length: 9,380 mm Cargo area width: 2,470 mm Cargo area height: 3,300 mm Lounge/meeting room * Seating area and lift table * Air conditioning - Fujitsu * TV * Roof hatch / glass version Interior dimensions Length: 3,100 mm Width: 2,480 mm Height: 2,070 mm ----Price: 39,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale reserved.

Condition: used, Product: Big bag sack holder. Ppjdpfexdh E Hox Amyow Condition: used Dimensions: 2400 x 1450 x 1100 mm Load capacity: 1 t Available quantity: 32 pcs Stackable.

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette Ppsdpfju Ni Rpex Amyjw 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag and so on 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is easy, requiring just two simple steps: filling the bag from the top and sealing the bag. For sale: Autobag bags in the following sizes: 150 × 250 – 1.5 million bags 200 × 320 – 2.5 million bags Price for full Euro pallet: 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on 10 or more pallets: €0.01 per bag Ppsdper E Dpzjfx Amyow From 1 million Autobag bags: from €0.01 each Currently reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Production orientation: Vertical Conveying system: Infeed and outfeed optional and dependent on product Film feed: Rear Forming shoulder: Fixed Operator display: Touchscreen with memory function Drives & controls: 3 servo motors and PLC control system Packaging length: 50–190 mm Packaging width: 50–150 mm (depending on film width) Packaging height: Dependent on forming shoulder Speed: 15–30 bags/min, depending on material, pack size, and product Film width: 110–320 mm Power consumption: Approx. 4.6 kW Machine material: “304 stainless steel with surface treatment” Printer bracket: Suitable TTO or ink wheel printer optionally available at extra charge Delivery time: Current lead time under 10 weeks Z-conveyor system: €8,500 Features: Stainless steel configuration, suitable for the food industry • Application for granules and small parts such as screws • Sectors: Pet food, food (coffee, nuts), metal industry • Simple touchscreen operation with color icons Pedpfx Amoq Ikhasyepw • Safety protection covers • Can be integrated upstream/downstream with other machines • Customer-specific modifications/designs on request • 12-head scale integrated, hopper 0.8L Additional options (on request and at extra cost): • Euro hole punch etc. Production orientation: vertical

Condition: new, functionality: fully functional, Features of the system 1. Chain conveyor, 2.9 meters in length (other lengths available upon request) 2. Two custom-made forming shoulders with a fixed shape, adapted to the product dimensions 3. Single film loader + Automatic film centering device 4. End sealing unit, box motion, single sealing jaw Psdpfxek Dz Hwo Amyopw 5. Robust, medium fin sealing structure 6. Eight servo-controlled drives 7. HMI control panel 8. Four individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Bag length programmable 13. Standard running direction: left to right Technical parameters 1. Product length: L120-600mm 2. Product width: B70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1 phase, 220V 50Hz 7. Total power consumption: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm