Used Carousel Lathe for sale (5,464)

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A Ppedpfx Aasydmbushju 3 turrets Parts conveyor Magazine Further details on request

Condition: good (used), Year of construction: 2015, Main and counter spindle Podpfx Aaeyx Tk Tjhepu 3 turrets Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Bar feeder FMB Turbo 2-20

Condition: used, Model:- AY 1000 x 1000, Serial No: Nc-A3-045 1 metre swing over bed, 1 meter between centres 390mm Swing Over Saddle Ppsdjyn R Hcspfx Aahou 180mm Spindle Bore 4 Jaw Chuck 800mm Diameter Quick Change Tool Post Fagor 8055 controls Made In Taiwan

Condition: good (used), functionality: fully functional, turning length: 2,500 mm, spindle bore 80 distance between centers 2500mm weight approx. 5000kg max. turning diameter 880mm 4.5/900 rpm length 490cm height 145cm width 150cm Ppodpfx Aaozhp Anjhsu digital readout on X and Z axis rapid traverse X and Z including 3-jaw, 4-jaw, and center chuck

Condition: excellent (used), Year of construction: 2015, DMG MORI NLX 2500 MC/700 lathe Year: 2015 M730M control system with CELOS-ERGOline Parts catcher Measuring probe Chip conveyor 5 driven tool holders Ppsdpfx Aaozgkdkeheu 2 ER32 axial tool holders 2 ER32 radial tool holders 1 end mill holder Very good condition, low operating hours.

Condition: used, Year of construction: 2006, centre distance 1000 mm turning diameter over bed 420 mm turning diameter over bed slide 235 turning length 1000 mm spindle taper DIN 55027 Gr. 6 control MANUALPlus 4110 spindle bore 51 mm turning speed range 3 - 3000 U/min feed: 5.000/10.000 mm / min drive capacity - spindle motor 11 kW taper in tailstock-quill MK 4 dia. of quill 70 mm quill stroke 110 mm coolant ja/yes voltage 400 V Number of working hours 6.908 h weight of the machine ca. 3 t dimensions of the machine ca. 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 Psdpfx Aaszgigdehepu -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder -Tailstock -Rapid traverse -Coolant system -Machine lamp Condition: Machine runs perfectly, no known faults, ready for immediate use. Accessories: 1 three-jaw chuck 250 mm, bore 62 mm 1 set of hard jaws 4 sets of soft jaws including jaw holders 23 tool holders including tools Translated with (free version)

Condition: used, Meuser Guide and Lead Screw Lathe Type/Model: Meuser M1L Condition: Used Year of Manufacture: 1980s Technical Data Center Height: 210 mm Distance Between Centers: 1000 mm Spindle Bore: 55 mm Bed Width: 340 mm Spindle Speed: 40 - 1800 (12) Motor Power: 7.5 hp Tailstock Arbor: MK 3 Tailstock Quill Travel: 120 mm Ppjdpfxjzgia De Aahou Dimensions (L x W x H): approx. 1750 mm x 1200 x 1750 mm Equipment / Accessories: - 3-axis digital display, Heidenhain - 3-jaw chuck - Collet chuck, Forkardt - Quick-change tool holder, Multifix, number of positions 1 - Bed stop - Follower center - Chuck guard - Taper turning attachment - Machine feet

Condition: used, Year of construction: 1999, CNC turning lathe PC turn 125, manufactured in 1999. Ppsdpfozghvkjx Aaheu

Condition: used, Year of construction: 2022, machine/vehicle number: 71.0363, CNC turning machine with a 12-position turret Travel / Working area • X-axis: 370 mm • Z-axis (without Y-axis): 260 mm Podpfx Aozggdyeahjpu Feeds • Speeds: continuously adjustable • Rapid traverse X: max. 45 m/min (370 mm) • Feed forces X: 3450 N • Rapid traverse Z: max. 45 m/min • Feed forces Z: 4600 N Main spindle • Spindle speed: spindle-dependent, up to max. 8000 rpm • Drive power: 12 kW S1 • Bar diameter: 26 mm Clamping device • Chuck: 80 - 160 mm • Short taper DIN 55026: Form A, size 4 Turret • Type: disc turret • Manufacturer: SAUTER • Number of tools: 12 • Tool holder: tool holder with cylindrical shank according to DIN 69880 VDI 25 • Drive power: 2 kW S1 up to 6000 rpm, up to 6 kW S3 40% duty cycle up to 6000 rpm • Max. tool length: from turret face to tool front edge 140 mm Technical data • Machine dimensions (width x depth x height): approx. 2309 x 1689 x 2014 mm • Weight approx.: 4500 kg

Condition: ready for operation (used), chuck outer diameter: 1,050 mm, turning diameter: 1,050 mm, rotational speed (max.): 117 rpm, Model: 36 EM Table Dia: 42” (Oversized) Pedpfx Aozggfdoahepu Max Swing: 42” Table Speeds: To 117 RPM

Condition: used, Cnc multispindle lathe TORNOS MULTIALPHA 8x20 Ppodpfxjzhph De Aahju

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Number of spindles : 8 - Max. part length : 100 [mm] SPINDLES - Max. bar diameter : 22 [mm] - Spindle speeds : 8000 [rpm] NUMERICAL AXES Pjdpfx Aaezhphwshspu - 1 chariot croisé position 1 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 2 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 3 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 4 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 5 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 6 : x=50 [mm], Z1=80 [mm] - 1 chariot de coupe 7 : x=65 [mm] - 1 chariot de coupe 8 : x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.300 x 2.200 [mm] - Machine height : 2.600 [mm] - Machine weight : 12.000 [kg] MACHINE HOURS - Number of hours under power : 73500 [h] EQUIPMENT - CNC : Fanuc 30i-TB - Chips conveyor - Coolant tank * with high-pressure pump * with cooling unit for coolant - Bar loader : ROBOBAR MSF-HC-522/8 - Oil mist extractor

Condition: used, TECHNICAL DETAILS - Number of axes : 18 - Number of spindles : 6 - Max. part length : 120 [mm] SPINDLES - Max. bar diameter : 8 - 25.4 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 18 [kW] NUMERICAL AXES - 1 chariot croisé position 1 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 2 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 3 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 4 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 5 : x=50 [mm], Z1=80 [mm] - 1 chariot de coupe 6 : x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 71 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.500 x 1.600 [mm] - Machine height : 1.950 [mm] - Machine weight : 8500 [kg] MACHINE HOURS - Number of hours under power : 72000 [h] Ppodezhphqepfx Aahsu EQUIPMENT - CNC : Fanuc 16i-TB - Hirth teeth - Contre broche avec dispositif de contre-opération - Porte-outils de tournage Goltenbolt à toutes les positions - 5 perceurs fixes - 1 porte-outils de tronçonnage - Chips conveyor - Coolant tank * with high-pressure pump * with cooling unit for coolant - Bar loader : ROBOBAR MSF-522/6 - Oil mist extractor

Condition: used, TECHNICAL DETAILS - Number of axes : 18 - Number of spindles : 6 - Max. part length : 120 [mm] SPINDLES - Max. bar diameter : 8 - 25.4 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 18 [kW] NUMERICAL AXES - 1 chariot croisé position 1 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 2 : x=50 [mm], Z1=80 [mm] Ppjdpezhphkefx Aahju - 1 chariot croisé position 3 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 4 : x=50 [mm], Z1=80 [mm] - 1 chariot croisé position 5 : x=50 [mm], Z1=80 [mm] - 1 chariot de coupe 6 : x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 71 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.500 x 1.600 [mm] - Machine height : 1.950 [mm] - Machine weight : 8500 [kg] MACHINE HOURS - Number of hours under power : 65000 [h] EQUIPMENT - CNC : Fanuc 16i-TB - Hirth teeth - Contre broche avec dispositif de contre-opération - Porte-outils de tournage Goltenbolt à toutes les positions - 5 perceurs fixes - 1 porte-outils de tronçonnage - Chips conveyor - Coolant tank * with high-pressure pump * with cooling unit for coolant - Bar loader : ROBOBAR MSF-522/6 - Oil mist extractor

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Ppodpfx Aasyyxzmjhju Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, turning diameter over bed 460 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 600 mm turning speeds 22 - 1500 U/min centre height 230 mm total power requirement 6,5 KW weight of the machine ca. 1,8 t Pedpfx Aaszhn Uvshepu dimensions of the machine ca. 2,8 x 1,2 x 1,5 m Centre lathe - Forkardt F200 3-jaw chuck - Multifix quick-change tool post - Steady rest - Chip tray - Tailstock centre

Condition: used, Year of construction: 1990, turning diameter over bed 500 mm turning diameter over slide rest 280 mm turning length 1000 mm turning speeds 23 - 1000 U/min centre height 250 mm Pedpfx Aaozhn Upohjpu spindle bore 105 mm total power requirement 8,0 KW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,5 x 1,3 x 1,5 m Centre lathe (lead-screw and feed-rod lathe) - 3-axis digital readout - Forkardt F315 3-jaw chuck - Multifix quick-change tool post - Chip guard - Coolant system - Chip tray - Tailstock centre

Condition: used, Diameter of the table 3000 mm turning diameter Max. 5500 mm column travel 1000 mm passage Querbalken 1000 max. mm Passage height Vertikalschlitten 1854 ma mm table turning speeds 82 U/min table load max. 25 t Ppodpfxjzhn Txo Aahju The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2023, machine/vehicle number: 21760666, feed length X-axis: 420 mm, turning height: 780 mm, Machine Data • Year of manufacture: 2023 • Recorded operating hours: 2,730 • Machine control system: SIEMENS, Type SINUMERIK 840D SL Technical Data • Travel ranges o X-axis travel: 420 mm o Z1 / Z2-axis travel: 780 mm Pedpszgfphofx Aahjpu o Z3-axis travel (tailstock): 600 mm o Z4-axis travel (steady rest, optional): 550 mm o Y-axis travel (optional): +51 / -23 mm • Rapid traverse rates o Z1 / Z2-axis: 60 m/min o Z3-axis (tailstock): 30 m/min o Z4-axis (steady rest, optional): 30 m/min o X-axis: 30 m/min o Y-axis (optional): 15 m/min • Working area o Distance between centers (spindle nose - tailstock): 780 mm o Max. turning diameter: 300 mm o Max. turning length: 750 mm o Workpiece weight: approx. 300 kg • Performance data o Max. speed: approx. 6,000 rpm o Power: approx. 26 kW • Tool turret o Tool positions: 12 o Turret indexing time, one station with locking: 0.3 s o Turret indexing time, station to station with locking: 0.5 s o Tool holder (DIN 69880): VDI 40 • Weight o Total weight: approx. 13,000 kg Peripherals • Chip conveyor, BÄR & CO., Type GF25L42L-P63, year of manufacture 2017, serial no. 61170009 • Air filter unit, IFS, Type M 1600, year of manufacture 2015, serial no. 544070-1, self-weight approx. 85 kg, connection power 400 / 460 V, 50 / 60 Hz, 0.75 kW, 1.7 / 1.5 A • Coolant filter unit, BÄR & CO., Type SF 51, year of manufacture 2018, serial no. 61180006 • Cooling unit, RKV, Type 4.3 K, year of manufacture 2018, serial no. 3-36613, connection power 400 V / 50 Hz, permissible operating pressure approx. 28 bar, tank volume approx. 90 l

Condition: reconditioned (used), Gomad wood lathe, type DNXA-40x100 A, after overhaul. For sale: Gomad DNXA wood lathe, Polish-made. Overhauled, with new electrical components and a one-year warranty. Turning diameter: approximately 42 cm. Bed length: 132 cm. Tailstock with rotating and eccentric locking. Ppjdozhn Shjpfx Aahou Two sizes of tool rests. Can be disassembled for transport; delivery is possible within approximately 100 km upon agreement. Three turning speeds adjustable by belt. M24 thread on the spindle, making it easy to attach chucks and faceplates. Excellent for learning woodturning. Suitable for both small and large bowls.

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Hydraulic pump motor with a power of 1.5 kW Ppedpezgc Rcjfx Aahju Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. counter spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool positions 6 / 4 Fixed stations 6 Driven stations 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool positions 2 / 3 Fixed stations 2 Driven stations 3 SLIDE Y2 Tool positions 3 / 2 / 2 External machining 3 Internal machining 2 Driven stations 2 Weight: 4,500 kg Bar loader: IEMCA BOSS Pedpfx Aajzgdk Dshjpu

Year of construction: 2005, condition: ready for operation (used), A Gildemeister CNC lathe is available. Tool stations: 8, max. turning diameter: 350mm, max. swing diameter over bed/cross slide: 400mm/270mm, max. turning length: 650mm, travel X/Z: 220mm/700mm, rapid traverse: 15m/min, chuck diameter: 200mm. Machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 2800kg, control: Fanuc 10i, automatic operating hours: approx. 462h. Documentation available. An on-site inspection is possible. Ppjdezhntfjpfx Aaheu

Year of construction: 2002, condition: ready for operation (used), A relatively lightly used Traub CNC universal lathe is available. Spindle bore: 82mm, max. chuck diameter: 315mm, turning length: 750mm, X/Z travel: 360mm/750mm, Z-axis travel: +/-60mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Documentation available. An on-site inspection is possible. The image is for reference only. Ppsdpfx Aszhnrnjahou

Year of construction: 2007, condition: ready for operation (used), A CNC short-bed turning machine Emco is available. Travel X/Z: 100mm/300mm, max. turning diameter: 85mm, max. swing diameter: 250mm, max. turning length: 255mm, center distance: 405mm, max. bar capacity: 25.5mm, spindle bore: 30mm, spindle speed: 6300rpm, tool stations: 12, tool interface: VDI16, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/1850mm, weight: approx. 1400kg, control: Siemens Sinumerik 810D, operating hours: approx. 27000h, spindle hours: approx. 11000h. Including bar feeder. The spindle was replaced in 2021 at approx. 25000 operating hours. Documentation available. An on-site inspection is possible. Psdpfxjzhnt Se Aahspu