Used Capper for sale (245)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Menslage
18,398 km
ACMI BLO2FILL Blowmoulder, filler, capper combiblock (2026)
ACMIBlasmaschine, Füller, Verschließer, Combiblock
Call
Condition: used, Year of construction: 2026, Overview
This blowmoulder, filler and capper combiblock was manufactured by ACMI (Italy). The machine can be operated fully floor level and is a very good solution offering the advantage of a dual-cavity design (one mold = two bottles up to 70mm diameter) achieving an up to 17% reduced footprint vs equivalent output from traditional single-cavity equipment, improving production line accessibility. The increased output on smaller formats allows better utilisation of downstream equipment in the production line, resulting in improved ROI of total investment (100% additional output on smaller formats with less than 36% additional CAPEX).
The BLO2FILL ESF 12/120/20 is designed for the production of PET bottles and subsequent filling and capping in a single integrated system. The machine is suitable for carbonated water, still water and carbonated soft drinks.
Technical data
- Capacity: up to 48,000 bph (500 ml PET)
- Formats: 500 ml PET bottles
- Application: Blowing, filling and capping of PET bottles
Kdjdpsyzc Hpjfx Abpjw
- Configuration:
- Rotary stretch blow moulding machine SBF412 (2-cavity configuration)
- Electronic-volumetric filler with 120 valves
- Fully electronic capper (FEC) with 20 heads
- Neck finish: 26/22 GME 30.40
- Cap type: Plastic screw flat / press-on caps
- Filling technology: Electronic-volumetric
- Products: Carbonated water, still water, carbonated soft drinks
- CO₂ content: up to 8.5 g/l
- Max. filling temperature: up to 18°C (carbonated water), 25°C ambient, 12°C (soft drinks)
Scope of Delivery
- Blowmoulder | Acmi | SBF412 | Rotary stretch blow moulding machine (2-cavity) - 100% r-PET and lightweight preform compatible
- Filler | Acmi | ESF | Electronic-volumetric filler with 120 valves
- Capper | Acmi | FEC | 20-head capper for screw and press-on caps
- Cap Feeder | Operator level waterfall orientation and feeding
- Preform orienter |Operator level preform feeding
- Preform insertion control | Control system
- Blowing air recovery system | For pre-blow and line
- Cooling system | Water recirculation on combo interface
- Automation package | PLC teleservice, Ethernet, UPS, remote access
- Lubrication system | Automatic centralized lubrication
- Foaming unit | Automatic system
Success:
Your message has been sent.
Listing
Fumane (Verona)
18,643 km
Used KHS filler + FERRUM type seamer 48/6 15000 CPH
FERRUM48/6
Call
Condition: used, Year of construction: 1990, machine/vehicle number: M360, Used KHS filler + FERRUM type seamer 48/6 15000 CPHTechnical Specifications & Performance DataThis KHS Ferrum filler-capper monoblock is designed for isobaric filling and seaming of aluminum cans in beverage production environments. The machine combines a 48-valve filling section with a 6-head seaming section, creating a compact can filling monoblock for integrated industrial packaging operations.Manufacturer: KHS and FerrumModel: 48/6Filling configuration: 48 filling valvesSeaming configuration: 6 seaming headsFilling method: IsobaricNominal capacity: 15,000 cph based on 0.5L cansStated capacity range: 15,000–20,000 cph depending on can sizeCompatible can formats: 0.25L, 0.33L and 0.5LCurrent tooling: 0.25L can format and corresponding lid sizeManufacturing period: 1990sAdvanced Automation & Control SystemsThe fully refurbished configuration includes PLC control and an HMI display to support machine operation and monitoring. This version also includes a new pneumatic system and a new electrical system as part of the refurbishment scope. These systems are intended to provide an updated operating platform for the filling and seaming process.The monoblock is configured for one can type and lid size at a time. Change parts are fitted for the 0.25L can format, while the machine is also specified as suitable for 0.33L and 0.5L cans when the appropriate format equipment is available.Production Line Integration CapabilitiesThis can filling and seaming monoblock can be positioned in a used bottling line or canning line between empty-can handling equipment and downstream drying, labeling, secondary packaging and palletizing systems. Its integrated filling and closure arrangement supports efficient transfer from filled can to seamed finished container.Machines of this type are suited to beverage production lines requiring pressure filling and secure lid seaming. The available 0.25L, 0.33L and 0.5L format capability supports production planning across common can sizes, subject to the relevant change parts and tooling.Machine Condition & Maintenance HistoryThe machine is used and dates from the 1990s. It was purchased as used equipment and has remained in warehouse storage for several years after being idle for an extended period. A dry run is not possible in its current state.Two supply conditions are described. The current-condition version is offered as used equipment and requires refurbishment. The fully refurbished version includes a complete mechanical overhaul, new pneumatic components, a new electrical system, PLC control and HMI display. The refurbished version is supplied with a 6-month warranty.Operational Performance & VersatilityThe KHS Ferrum monoblock uses isobaric filling, a process suited to pressurized beverage production applications. Its 48 filling valves provide the filling capacity, while the 6-head Ferrum seaming section closes cans with the corresponding lid format.Designed for aluminum can handling, the machine supports 0.25L, 0.33L and 0.5L ca...
Kedpfx Abs Akk R Ijpedw
Success:
Your message has been sent.
Listing
Stary Sącz
17,816 km
Triblock volumetric filling machine
KHSEV-VF 80 + FR-EM 45 + ALCOA KUPI 10/540
Call
Condition: used, KHS triblock filling line 45-80-10
- KHS bottle rinser, Innoclean FR-EM 45
- KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters
- ALCOA KUPI 10/540 capper (max. 25,000 bph)
Output: approx. 20,000 bph
Control system: S-7
Year of manufacture: 1998
Kedpfx Abjychaispsdw
Complete machine documentation – several folders.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Menslage
18,398 km
ALWID FAVORIT-3SK Solo Screw Capper (2023)
ALWIDSolo Schraubverschließer
Call
Condition: used, Year of construction: 2023, Overview
Kdedpfjxbrzaex Abpsw
This rotary vacuum capping machine was manufactured in 2023 by Alwid (Germany). The machine is equipped with three vacuum capping heads and is configured for TO82 twist-off closures on round jars. It is in excellent condition and comes with infeed and outfeed conveyors. The machine is available immediately.
Technical data
- Capacity: approx. 1,000–1,400 jars/h
- Formats: Round jars Ø77/86 mm, 90 mm height; TO82 twist-off closures
- Working direction: Right to left
- Working height: Adjustable from 850 mm
- Electrical connection: 400 V, 50 Hz, 3-phase/N/PE
- Capping heads: 3 vacuum heads with torque adjustment via hysteresis clutch
- Conveyor: 1.5 m infeed + 1.5 m outfeed, stainless steel chain, width 82.5 mm
- Control: Siemens S7 HMI (German)
- Construction: V2A stainless steel base, drip tray, capping head unit, CE-compliant safety guarding with Makrolon panels and safety doors
Scope of Delivery
- Alwid Favorit-3SK rotary vacuum capping machine (2023)
- Integrated conveyors (1.5 m infeed + 1.5 m outfeed)
Note: Sorting unit and additional format parts can be offered optionally.
Success:
Your message has been sent.
Listing
Menslage
18,398 km
Wildgoose, Slowbeer ENOSEURO Craft Can Line for Non-Returnable Glass Bottles (2016)
Wildgoose, SlowbeerAbfülllinie für Glasflaschen (Einweg)
Call
Condition: used, Year of construction: 2016, Overview
This compact filling line for cans and bottles consists of equipment from Wildgoose, Slowbeer, Enos Euro and Millipore and is designed for craft beverage production with flexible batch sizes.
The line combines isobaric and atmospheric filling technologies and includes semi-automatic and manual machines for filling, capping, labeling, and product filtration. The core component is a Wildgoose WG1-CE can filler (2021) with integrated seaming functionality.
With its modular setup, the line is particularly suitable for small to medium-scale producers, pilot production, or specialty beverages such as craft beer, kombucha, cider, or soft drinks.
Technical Data
- Capacity:
- Up to 24 units per minute (atmospheric – Wildgoose)
- Up to 16 units per minute (isobaric – Wildgoose)
- Additional manual / semi-automatic filling capacity depending on configuration
- Formats:
- 20 cl – 1.5 L (depending on machine)
- Container types:
- Cans and glass bottles
- Application:
Kjdpsyxr Anefx Abpjdw
- Beer
- Craft beverages
- Kombucha
- Cider
- Soft drinks
- Filling technologies:
- Isobaric filling (carbonated products)
- Atmospheric filling
- Manual filling
- Filtration:
- 3-stage microfiltration system (Millipore)
- Configuration:
- Modular / semi-automatic line
- Condition: used, good condition
Scope of Delivery
- Can Filler | Wildgoose | WG1-CE | Isobaric and atmospheric can filling with integrated seaming; 16 cpm (isobaric) / 24 cpm (atmospheric); formats 33 cl / 50 cl | 2021
- Manual Bottling Machine | SCH | SCHPK6 | 6-spout manual filler; approx. 250 bottles/hour; formats 20 cl – 1.5 L | 2016
- Bottling Machine | Slowbeer | RI4 | 4-spout filler; approx. 350 bottles/hour; formats 22 cl – 1.5 L | 2012
- Labeling Machine | Enos Euro | Base | Semi-automatic labeler; approx. 28–30 units/min; formats 22 cl – 1.5 L | 2017
- Crown Capper (2x) | Slowbeer | Tap Air Corona | Pneumatic crown cappers; crown sizes 26 / 29 mm | 2012
- Microfiltration System | Millipore | 3-stage | Stainless steel construction; 3-stage filtration system | 2016
Additional Information
- Seaming unit is integrated in the Wildgoose WG1-CE filler
- The Wildgoose WG1-CE fills cans only; bottles are filled on the separate Slowbeer and SCH bottle fillers
- Ideal for craft production with frequent product or format changes
- Compact footprint and modular design
Discover more used machines
Success:
Your message has been sent.
Listing
Freising
18,468 km
Bucket filler and capper
Miromatic
Call
Condition: used, Year of construction: 2001, Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place.
Additional title: weight-based filling
Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity
Kdedpfxeyvtrle Abpsw
Power: 11 kW
Voltage: 400 V
Frequency: 50 Hz
Heating / Cooling: steam 3 bar; 10 kg/h
Compressed air: 6-8 bar; Qmax = 300 l/min
Length: 3708 mm
Width: 968 mm
Height: 2442 mm
Formats: 1.3-litre bucket (H = 132 mm, Dmax = 132 mm); 6.1-litre bucket (H = 195 mm, Dmax = 226 mm); 10-litre buckets are also possible
Running direction: left -> right
Base construction: linear filler
Features: Filling head; Capping head; Bucket magazine; Lid magazine; Heating cartridge; Load cell; Protective housing with doors, control cabinet with control buttons and 12-inch touchscreen; Product connection/CIP inlet DN50; Steam connection 1"; Compressed air connection 3/8"; CIP return DN40
Success:
Your message has been sent.
Listing
Fumane (Verona)
18,643 km
Used GANGLOFF filling triblock 23000 BPH
ZalkinCX 6/12
Call
Condition: used, Year of construction: 2011, machine/vehicle number: M327, Used GANGLOFF filling triblock 23000 BPHTechnical Specifications & Performance DataThis rotary Filling Monoblock CX 6/12 is engineered for high-efficiency beverage production and industrial packaging. Manufactured by Gangloff, it integrates precise filling with reliable capping to support demanding used bottling line and second hand equipment projects without compromising quality. Optimized for PET bottles and still water, the machine combines robust construction with a compact rotary footprint and neck-handling transfer for stable container control at high speeds.Manufacturer: GangloffModel: CX 6/12Year of manufacture: 2011Production speed: up to 23000 bottles/hourFiller configuration: 54 valvesCapper configuration: 13 heads (Zalkin)Current bottle format: 1.5LCompatible container material: PETNeck finish: 29/25Transfer type: Neck-handlingMachine type: RotaryWork direction: CounterclockwiseMaximum bottle height: 340 mmOperating pressure: 6 barControl platform: Schneider PLC and HMIAdvanced Automation & Control SystemsThe monoblock is equipped with Schneider PLC and HMI for stable, intuitive operation and simplified diagnostics. Automated sequences manage filling and capping synchronization, while recipe-based adjustments support quick format transitions. The neck-handling architecture reduces mechanical adjustments when switching bottle heights, enhancing uptime and repeatability. Operator interfaces provide clear status visualization and alarms to maintain consistent beverage production quality.Production Line Integration CapabilitiesDesigned for seamless integration in a complete bottling line, the machine can operate inline with upstream rinsing machines and downstream labeling, inspection, and packaging machinery. The neck-handling conveyor interface ensures gentle container transfer, minimizing scuffs and misalignment. Format flexibility centers on PET bottles with 29/25 necks, with the current setup optimized for 1.5L water. The rotary monoblock layout conserves floor space while delivering continuous, stable throughput for industrial packaging applications.Machine Condition & Maintenance HistoryThe unit is ready for operation and has been overhauled. It is supplied with compatible spare parts and includes a 6-month guarantee. Its current configuration supports immediate deployment in beverage production environments, particularly for still water in PET bottles. The maintained condition and recent service provide a reliable starting point for second hand line upgrades or capacity expansions.Operational Performance & VersatilityThis monoblock is ideal for Water production in PET containers. The 54-valve filler delivers uniform fills at high speeds, while the 13-head Zalkin capper ensures precise torque application and consistent sealing for 29/25 neck finishes. Neck-handling transfer enhances stability across tall form...
Kdedpe Adt Nbofx Abpew
Success:
Your message has been sent.
Listing
Menslage
18,398 km
ALWID AD Solo Cork Capper (2016)
ALWIDSolo-Korkenverschließer
Call
Condition: used, Year of construction: 2016, Overview
This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately.
Kdodpfsxb Uncex Abpow
Technical data:
- Mobile stainless steel frame
- T-cork head for Ø34/19 mm and height 22/13 mm
- cap-chute for Ø34/19 mm and height 22/13 mm
- Sorting unit via vibrating feeder bowl with noise insulation hood
- Conveyor belt
- Stopper
- Protective housing with safety switch
- Electrical control via SIEMENS Logo
Success:
Your message has been sent.
Listing
Heerhugowaard
18,525 km
Plastic bottle filling and capping machine
TelmAstra 117 mixer, filler and capper
Call
Condition: ready for operation (used), Suitable for:
Kdjdpjyxpqcefx Abpew
- Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing
- Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes
- Cosmetics: shampoos, creams, shower gels, oils, lotions
Piston filler with 4 volumetric filling heads, with upward dispensing
Manual cap placement by operator
Automatic capping unit
Incl. 80-liter heated tank with mixer
Up to 2,000 bottles per hour
Success:
Your message has been sent.
Listing
Stary Sącz
17,816 km
Filling and capping machine for alcoholic beverages and drinks.
StorkHVS 32/8
Call
Condition: used, Professional bottling monoblock from the renowned manufacturer STORK, designed for filling alcohol (vodka, liqueurs, and other still beverages) into glass bottles with aluminum ROPP closures.
Technical data:
Manufacturer: STORK
Year of manufacture: 1991
Model: HVS 32/8
Machine type: Monoblock (filling + capping)
Ksdpfx Abeyxv Nlspjdw
Capacity: approx. 8,000 bottles/h
Filler: 32 valves
Capper: 8 ROPP heads (aluminum, e.g., 28 mm)
Technical condition: Used machine, condition as shown in photos, serviced and operational up to the end of production.
Success:
Your message has been sent.
Listing
Lorquí
19,581 km
SOMME 343 CLOSER WITH 7-PISTON FILLER
SOMME343
Call
Condition: excellent (used), SOMME 343 Automatic Capper with 7-Piston Filling Unit
SOMME 343 automatic capper equipped with a 7-piston filling unit, designed to integrate the dispensing, filling, and capping operations of containers within an automated food production line.
The system combines a volumetric filling system with 7 pistons and an SOMME 343 automatic capper, enabling continuous dispensing of the product and subsequent closing of the container.
The piston filling technology is particularly suitable for products that require controlled volumetric dispensing, including liquid, semi-liquid, and viscous products, depending on the installed configuration.
MAIN FEATURES
-Capper manufacturer: SOMME
-Model: 343
-Type: Combined filling and capping line
-Filling unit: 7 pistons
-Volumetric filling system
-Simultaneous dispensing using multiple pistons
-Automatic capping of containers
-Continuous industrial operation
-Automatic feeding and positioning of containers
-Integrated transport system
-Automatic transfer between filling and capping
-Robust industrial construction
-Designed for automated production
-Integrable into complete packaging lines
PROCESS
The containers are automatically fed to the 7-piston filling unit, where they are positioned to receive a controlled amount of product.
The volumetric system performs the dispensing, and once the filling is complete, the containers are automatically transferred to the SOMME 343 capper, where the capping operation is performed before continuing to the next stage of production.
Combining both operations in a single line allows for a continuous flow between filling and capping, reducing intermediate handling of the container.
It can be integrated with:
Product feeding systems
Container feeders
Cap feeders
Conveyors
Weight checkers
Inspection systems
Pasteurizers and autoclaves
Container washers
Labeling and coding machines
End-of-line equipment
APPLICATIONS
Particularly suitable for canning industries, sauce manufacturers, tomato product manufacturers, cream, puree, pate, food preparation manufacturers, and other packaging industries that require automating filling and capping simultaneously.
Kdsdpfxozxcghj Abpew
The 7-piston filling unit + SOMME 343 capper provides a compact solution for industrial lines that require automatic volumetric dispensing and subsequent container capping.
Machine available for inspection.
Additional technical information, dimensions, additional photographs, or videos can be provided upon request.
Success:
Your message has been sent.
Listing
Stary Sącz
17,816 km
Filler + capping machine for 5 L PET bottles
RIVI Bottling Ermes 12+ ZALKIN 4
Call
Condition: used, Set of machines for the production of beverages in 5-liter PET bottles.
1) RIVI 24 carousel filling machine
- machine modernized in 2013
- previously used for 1.5 L bottles (24 fillers)
- number of filling heads: 12 pcs (for 5 L bottles)
- capacity: approx. 1800 bph 5 L
2) ZALKIN 4 PET bottle capper
- number of closing heads: 4 pcs
Kodpfx Aou I N Npsbpodw
- capacity: approx. 2000 bph
Used machines, functional at the time of dismantling.
Complete original technical documentation.
Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers.
.
Success:
Your message has been sent.
Listing
Geisenheim
18,603 km
Triblock 16-16-3
Technovin / Afimex16-16-3 0,2 Liter PET und Glas 22 mm
Call
Condition: used, machine/vehicle number: 04 897, consisting of:
Rinser 15 Nozzles
Kdedpfj Aikn Njx Abpsw
Vacuum filler 16 Filling valves
Screw capper 3 heads 22 mm screw cap
Success:
Your message has been sent.
Listing
Fumane (Verona)
18,643 km
Used AROL speciale kamma PKV capping machine 10000 BPH
ArolSpeciale Kamma PKV
Call
Condition: used, Year of construction: 2013, machine/vehicle number: TP129, Used AROL speciale kamma PKV capping machine 10000 BPHTechnical Specifications & Performance DataThis Arol rotary capping machine is designed for automated bottle closure in a used bottling line. The Speciale Kamma PKV model combines rotary operation with neck-grip transfer, providing controlled bottle handling through the capping process. It is configured with five capping heads and a maximum speed of 10000, supporting efficient industrial packaging operations where consistent closure application is required.Manufacturer: ArolModel: Speciale Kamma PKVYear of construction: 2013Capping heads: 5Maximum speed: 10000Machine configuration: RotaryBottle transfer: Neck-grip transferWorking-table height: 1200 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for coordinated operation of the rotary capping cycle. Clockwise working direction is specified. Electrical supply is 400V, 3 Ph+N +T, with a 20 A electrical rating. This configuration is suited to integration into an industrial bottling line with compatible electrical and control infrastructure.Electrical supply: 400V 3 Ph+N +TElectrical rating: 20 APLC: SiemensRotation direction: ClockwiseProduction Line Integration CapabilitiesThe rotary capper can be positioned downstream of filling equipment and upstream of inspection, labeling, or secondary packaging machinery. Neck-grip transfer supports stable bottle movement at the closure station, while the included cap elevator provides automatic cap feeding to reduce manual handling. The machine is suitable for integration with conveying systems used in beverage production and broader industrial packaging applications.For bottle-based applications, capping machinery of this type can support PET and glass container handling when the bottle neck, cap format, and transfer interfaces are compatible with the installed configuration.Machine Condition & Maintenance HistoryThis second hand Arol capping machine is ready for use. It has been refurbished and is supplied with compatible spare parts. A 6-month warranty is included. The machine is offered as inspected and accepted, making it suitable for buyers seeking a prepared capping unit for a used bottling line or production-line upgrade.Operational Performance & VersatilityThe machine is specified for natural water, sparkling water, soft drinks, milk, oil, beer, wine, alcoholic beverages, and preserves. Its rotary design and automatic cap elevator make it relevant to beverage production and food-packaging environments requiring repeatable bottle closure operations. Final suitability depends on verification of the required cap type, cap dimensions, neck finish, bottle geometry, and line speed.Installation Requirements & Site PreparationInstallation requires a 400V 3 Ph+N +T electrical connection and a compressed-air supply at 6 bar. The working-table height is 1200 mm and should be considered when aligning infeed and dis...
Kdodsz E Dgtepfx Abpsw
Success:
Your message has been sent.
Listing
Menslage
18,398 km
Bertolaso DELTA 512 S Solo Cork Capper (2000)
BertolasoSolo-Korkenverschließer
Call
Condition: used, Year of construction: 2000, Overview
This solo cork capper was manufactured in 2000 by Italian company BERTOLASO. The machine was used for capping glass bottles with corks in a cider production line and is immediately available. Production at the original facility ceased in 2022.
Ksdpfowhwvlex Abpjdw
Technical data
- Capacity: From 9,000 bph to 12,000 bph
- Formats: 75 cl glass bottles
- Application: Cork caps for cider bottles
Scope of Delivery
- BERTOLASO DELTA 512 S solo capper
Success:
Your message has been sent.
Listing
Menslage
18,398 km
KHS Innofill NRF, Krones, Kematec Line for Returnable Glass Bottles (2007)
KHSAbfülllinie für Glasflaschen (Mehrweg)
Call
Condition: used, Year of construction: 2007, Overview
Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site.
Technical data
- Product: still wine
- Containers: glass bottles, design bottle 0.75 l
- Line output: 12,000 bottles/h
- Closures: natural cork, aluminium roll-on screw caps, shrink capsules
- Years of manufacture: 2006 - 2023
Scope of Delivery
Type | Manufacturer | Model | Description | Year | Listing
Bottling line
- Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off depalletizer, layer-pad and empty-pallet handling, 14,000 containers/h | 2023 |
- Bottle washer | KHS | INNOCLEAN | single-end washer for returnable glass, up to 14,500 bottles/h, drive and panel modernised in 2022 | 2007 |
- Empty bottle inspector | Krones | LINATRONIC M | base, finish, thread, sidewall and residual liquid inspection | 2018 |
- Filler-closer monoblock | KHS | INNOFILL NRF | 50 filling valves, cork closer and Zalkin roll-on capper with 10 heads each, CIP, 12,000 bottles/h | 2007 |
- Capsuling machine | Kematec | MBK 12 AS | shrink capsules, 12 heating stations, up to 12,000 bottles/h | 2006 |
- Bottle dryer | Kematec | T20-3 KMT | air-knife tunnel | 2006 |
- Labeller | Krones | ERGOMODUL | 2 cold-glue and 2 self-adhesive stations | 2020 |
- Case packer | KHS | INNOPACK SP | pick-and-place packer, KUKA controller | 2006 |
- Palletizer and stretch wrapper | ABB, Strapex | FLEXPALLETIZER, SWR 30 | 2 robot cells, pallet destacker, ring wrapper | 2007 |
Kdodpfxez I Rcae Abpsw
- Pallet labeller | Logopak | LOGOMATIC 920 II PF | print-and-apply | 2007 |
- Conveyors | all connecting bottle, case and pallet conveyors of the line
Process area
- Filtration system | KHS | CORVUS | cartridge microfiltration, 4 housings | 2007 |
- Wine warmer-cooler | KHS | INNOPRO | plate heat exchanger, up to 9,900 l/h | 2006 |
Condition
Used, still installed. Each machine is also listed on its own page with full technical data and photos - follow the link at the end of each row in the scope of delivery.
Availability
Available immediately. Location: Belgium. Delivery terms: Ex Works Belgium.
Success:
Your message has been sent.
Listing
Menslage
18,398 km
KOSME, Semidepal Barifill, Flexa 600 Line for Non-Returnable Glass Bottles (2015)
KOSME, SemidepalAbfülllinie für Glasflaschen (Einweg)
Call
Condition: used, Year of construction: 2015, Overview
Kedoyigigopfx Abpedw
This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance.
The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks.
With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling.
The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request.
Technical Data
- Capacity: up to 135 bottles per minute (BPM)
- Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz
- Filling product: beer, carbonated beverages, kombucha, functional drinks
- Filling system: isobaric probe filling with electronic level control
- Fill range: 12 oz – 24 oz containers
- Labeling system: cold glue labeling
- Bottle detection: integrated bottle burst detection system
- Construction: all stainless steel, high-hygiene design
- Cleaning: automatic CIP capability
- Operation: touchscreen HMI with recipe and product management
- Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply)
- Note: frequency / voltage converter required for non-US markets
- Condition: machine basically in good condition, dismantled and ready to ship
Scope of Delivery
- Depalletizer | KOSME / Semidepal | 2015
- Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015
- Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015
- Bottle Conveyors | KOSME | – | Included | 2015
Additional Information
- Manuals included
- Basic tooling and format change parts for 12 oz and 22 oz included
- Additional documentation available upon request
- All conveyance lines included
- Dismantling team available to supervise reinstallation and recommissioning
- Utility specifications (air, CO₂ / gas) available upon request
Success:
Your message has been sent.
Listing
Fumane (Verona)
18,643 km
Used Filling Monoblock GAI 2405 1500 bph
GAI2405
Call
Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph pre-owned monoblock filler / used bottle filling triblockThis Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines. As a monoblock filling machine (often searched as a used bottle filling triblock integrating rinser, filler, and capper), this pre-owned solution is ideal for wineries seeking a compact, reliable monoblock filler within a single frame.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks. As a gravity/light-depression system, it is not an isobaric configuration, making it well-suited to still products while remaining compatible with ancillary options such as a nitrogenator upstream or downstream if the line owner wishes to manage dissolved oxygen more tightly. These traits make it highly competitive among monoblock filling machines for still beverages.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality. In the context of a compact used bottle filling triblock, this integrated rinser enhances hygiene while maintaining a streamlined footprint.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands. Within a monoblock filling machine architecture, this single-head corker provides dependable, repeatable cork application aligned with premium still-wine presentation.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility. The turret rotation is clock...
Kjdps Adywrofx Abpedw
Success:
Your message has been sent.
Listing
Fumane (Verona)
18,643 km
Used Filling Monoblock ALFATEK Elvira for beer 2000 bph
AlfatekElvira 3/9/1
Call
Condition: used, Year of construction: 2016, machine/vehicle number: M296, Used Filling Monoblock ALFATEK Elvira for beer 2000 bph
Kods Adt Tajpfx Abpodw
General Characteristics of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph
The Used Filling Monoblock ALFATEK Elvira for beer 2000 bph serves as a filling system specifically designed for bottling beer in glass containers, ideal for artisanal or semi-industrial production lines. Alfatek built the unit in 2016, and the Elvira 3/9/1 model handles a production speed of 2000 bottles per hour in the 33 cl format, while also supporting the 75 cl format. Therefore, it meets the needs of breweries with varying product volumes. Moreover, its configuration allows easy integration into existing lines. In particular, this monoblock suits breweries focused on maintaining product quality.
Mechanical Configuration and Working Direction
The machine operates with a clockwise rotation and includes certified safety guards, which ensure compliance with workplace safety regulations. Furthermore, the safety system prevents accidental operator contact with moving parts. Currently, the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph remains offline but fully functional. In addition, all technical manuals are available, and the system has undergone regular maintenance and revision. As a result, the machine retains its mechanical integrity. Thus, it stands ready for immediate use upon installation.
Light Pressure Filling System
At the core of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph lies the filler with 9 valves, configured for light pressure filling. Notably, this system is ideal for beer, as it preserves carbonation and minimizes agitation. Consequently, it prevents foaming and ensures a clean fill level. The system ensures precision, consistency, and compatibility with 33 cl and 75 cl glass bottles. Additionally, operators can clean and maintain the valves with ease. In other words, this machine simplifies process control. Therefore, it supports stable and hygienic production.
Single-Head Capper for Two Cap Sizes
The capping unit, integrated into the monoblock, features a single head for crown caps, compatible with 26 mm and 29 mm diameters. The capper, manufactured by AROL, offers high reliability and synchronizes perfectly with the filling phase. Moreover, its construction ensures durability even under regular use. As such, it guarantees a secure seal for each container. Besides that, the capper minimizes the risk of misalignment. For this reason, many small breweries prefer this model for its simplicity and efficiency.
Product Application and Container Type
Manufacturers designed the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph specifically for beer bottling in glass containers. The machine does not support plastic or can formats. Because of this, it best suits craft breweries seeking high-quality packaging solutions. The light pressure filling system preserves the beer’s organoleptic properties and maintains its effervescence. In contrast, gravity filling would compromise carbonation. Therefore, this setup remains optimal for delicate products. Furthermore, the glass packaging ensures longer shelf life and consumer appeal.
Operational Condition and Spare Parts
The monoblock remains in good working condition and is available for functional testing. Even though it is no longer in production, it maintains its full operability. A full set of origi...
Success:
Your message has been sent.
Listing
Freising
18,468 km
Glass Bottle Filling Line (single-Use)
Call
Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: - Bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 - Swing top sealer Manufacturer: Rico - Labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 - Laser printer for dating Manufacturer: Domino - Bottle collecting table
Kdjdpfx Abezu Rw Tepew
Additional title: Filling line (long-tube filler, various bottle formats, various cappers)
Capacity: 3000 bottles/h
Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles
Features: Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine; Domino laser printer for dating; bottle collection table
Success:
Your message has been sent.
Listing
Geisenheim
18,603 km
Worm gearbox
SiemensBF 38 KQ
Call
Condition: used, machine/vehicle number: FDU1308/2161348 001, Main Gearbox Bertolaso Capper for Servo Motor
Kdedpfx Abs Akknzepew
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Geisenheim
18,603 km
Capping head for MCA 28
Call
Condition: used, z.B. for Borelli Alexa / Futura screw capper
Kdedpfxo Akkm De Abpow
Success:
Your message has been sent.
Listing
Fumane (Verona)
18,643 km
Used AVE OCEANIC-V filling line 12-12-1 2500 BPH
AVEOCEANIC-V 12/12/1
Call
Condition: used, Year of construction: 2001, machine/vehicle number: LC627, Used AVE OCEANIC-V filling line 12-12-1 2500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete AVE engineering solution designed for glass bottle oil filling and packaging. It delivers reliable performance for industrial packaging and beverage production environments seeking a second hand system with proven components.Production speed: up to 2,500 bottles/hour with 0.5L formatCompatible bottle formats: 0.25L, 0.5L, 0.75L square; 0.5L, 1.0L roundContainer types: Glass bottlesChange parts: Starwheels for 5 formats includedClosures: Aluminum screw caps 31.5mm and 35mm; heat-shrink capsules 31.5mm and 35mmPrimary models: AVE OCEANIC-V 12/12/1 filling monoblock; AVE 4T automatic rotary self-adhesive labeller (two stations)Monoblock key data (rinser/filler/capper): water consumption ≈ 200 L/h; air consumption 80 L/min; installed power 5 kW; absorbed current 13 A; weight 3500 kg; bottle running level 1100±50 mm; footprint approx. 3500 mm (L) × 1392 mm (W) × 2550 mm (H)Labeler key data (model 4T): air consumption 35 L/min; installed power 2 kW; weight 1000 kg; bottle running level 1100±50 mm; overall length 3000 mm; overall height 2000 mmAdvanced Automation & Control SystemsThe line integrates AVE control and electrical boards for centralized management of rinsing, filling, capping, capsuling, and labeling. Machine guarding with safety interlocks supports safe operation, while clearly marked utility connections simplify setup. Quick-change starwheels and guided adjustments support format changes across square and round bottles, reducing downtime and improving overall equipment effectiveness.Production Line Integration CapabilitiesThis complete bottling line is configured for inline operation with a monoblock rinsing-filling-capping system, a heat-shrink capsule applicator, and a rotary self-adhesive labeling machine with two stations for body and back labels. It is ideal for edible oil production on glass bottles in multiple formats and shapes. The standardized bottle running level (1100±50 mm) across modules simplifies conveyor alignment and integration with upstream and downstream handling equipment.Machine Condition & Maintenance HistoryThe line is presented as second hand industrial packaging equipment in good working condition and ready for operation. It has been configured and used for oil, with format parts included for five bottle formats. Components show consistent technical coherence across the system, characteristic of AVE manufacturing and design.Operational Performance & VersatilityEngineered for oil filling applications on glass containers, the monoblock ensures stable handling for both square and round bottles. The aluminum screw capping system handles 31.5mm and 35mm closures for a wide range of edible oil formats. The dedicated heat-shrink capsuling unit accommodates matching 31.5mm and 35mm capsules for a premium finish. The rotary self-adhesive labeler with two stations applies front and back labels with precision, supporting brand presentation and regulatory requirements.Installation Requirements...
Kjdpfj Adty Tox Abpedw
Success:
Your message has been sent.
Listing
Freinsheim
18,623 km
Beverage machine
BertolasoType 63/40/6/6
Call
Condition: excellent (used), Year of construction: 2006, functionality: fully functional, General
- Bertolaso filling and capping plant, built in 2006
- Well-maintained system with annual inspection
- Left/right running direction
- Capacity up to 8,000 bottles/h
63-station clamp-type overhead rinser
- Ozone sterilization medium
- Fully automatic sterilization before filling begins
- Centrally adjustable inlet starwheels, easy inlet screw replacement
40-station vacuum filler
- With new gearbox
- Centrally adjustable inlet screws
- Easy inlet screw replacement
- Fully automatic damping
- Central height adjustment
6-station natural cork capper
- With separate cork supply
Kdjdpeu A Imvofx Abpew
6-head screw capper for BVS 30/60 and MCA 28
- Central cap supply
- With central inspection station
- Automatic reject bottle ejection and collection station
- With fully automatic starwheel adjustment and easy screw replacement
The The filling and capping plant is available immediately and can be inspected at any time upon request.
-----
English version:
General Information
Filling and closing line Bertolaso, year 2006
- Well-maintained system with annual inspections
- Running direction: left/right
- Capacity up to 8,000 bottles/hour
- 63-station cap overhead inserter
Sterilization medium: ozone
- Fully automatic sterilization before filling starts
- Centrally adjustable feed stars, easy feed screw replacement
- 40-station vacuum filler
With new gearbox
- Centrally adjustable feed screws
- Easy feed screw replacement
- Fully automatic damping
- Central height adjustment
- 6-Station Natural Cork Closer
With separate cork supply
- 6-Head Screw Capper for BVS 30/60 and MCA 28
Central cap supply
- With central control station
- Automatic rejection of defective bottles and collection station
- Fully automatic star adjustment and easy screw replacement
- The filling and closing line is immediately available and can be inspected at any time upon request.
Used machinery for the beverage industry Hans Biedert
Success:
Your message has been sent.
Listing
China (People's Republic of China)
18,643 km
Used SIG filling monoblock 6000 BPH - year 2012
SIGGTN-00
Call
Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: M319, Used SIG filling monoblock 6000 BPH - year 2012Technical Specifications & Performance DataThis automatic filling and capping monoblock is engineered for reliable, mid-range output in beverage production and industrial packaging environments for fresh milk. Manufactured by SIG in 2012, it combines filling and capping on a single compact frame to reduce footprint and streamline changeovers. Designed for second hand installations and upgrades of a used bottling line, it offers dependable performance with standardized utilities and CE conformity.Manufacturer: SIGModel: GTN-00Year: 2012Production speed: 6000 bphBottle formats: Compatible with 0.5L to 1.0L bottlesContainers: Designed for PET and Glass bottle handlingOperating hours: 10000+Electrical supply: 380 V, 3-phase, 50 HzFull load current: 120 ALargest motor load current: 5.4 AShort-circuit interrupting capacity: 5000 AConstruction: CE-marked packaging machineryAdvanced Automation & Control SystemsThe monoblock is configured for automated operation with centralized machine controls, ensuring stable production at 6000 bottles per hour. Electrical architecture is standardized for 380 V, 50 Hz, three-phase networks, supporting safe integration into existing bottling equipment. CE conformity underpins safety circuits and compliant machine wiring, while the integrated design simplifies synchronization between the filler and capper to minimize downtimes during format changes.Production Line Integration CapabilitiesThis unit is well-suited for integration within a used bottling line or as a standalone monoblock in beverage production. Its adjustable working range supports bottle formats from 0.5L to 1.0L, with compatibility for PET and glass bottles, making it adaptable for diverse industrial packaging requirements. Conveyors and upstream/downstream modules can be synchronized to line speed, supporting efficient infeed and discharge configurations.Machine Condition & Maintenance HistoryThe machine is second hand with 10000+ operating hours and configured for ready-for-operation deployment, subject to standard installation and commissioning procedures. Its CE-marked construction and preserved utility specifications indicate a well-documented industrial asset suitable for continued service within beverage production environments.Operational Performance & VersatilityCombining filling and capping on one frame, the monoblock eliminates inter-machine transfer points and reduces footprint. The 6000 bph throughput is ideal for medium-scale operations, contract packaging, and line expansions. Flexibility across PET and glass bottles within 0.5L to 1.0L allows rapid response to product mix changes in bottling equipment portfolios. The integrated capping system ensures precise torque application aligned to the selected closure format when appropriately tooled.Installation Requirements & Site PreparationThe machine requires a 380 V, 50 Hz, three-phase electrical supply...
Kdsdpfxsymdqfs Abpow
We make it easier for you to find: "capper"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Capper (245)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month



































































































































































































































































