Used Calibration Grinding Machine for sale (64,420)

Condition: good (used), Year of construction: 2001, Ref. -No.: 10608 Manufacturer: KEHREN Type: RI 64 Year of construction: 2001 Hsdpfx Asya A U Aedaeh Type of control: CNC Control: Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany Table Diameter: 800 mm Grinding Diameter: 1250 mm Max. Table Load: 2000 kg Connection: 92 kVA Machine weight: 18000 kg Rated voltage: 3AC 400 V Rated frequency: 50 V Rated current: 157 A Performance assurance: NH-Sicherung 225 A Max. cabinet internal temperature: 55 °C Temperature change: max. 10 K innerhalb 1 Stunde Altitude max. above sea level: max. 1 K innerhalb Minuten m Further information: - Mold growth - Negligible risk inside the equipment - Impact of rodents and other pests - Temperature change max. 10 K within 1 hour - max. 1 K within 3 minutes - Supply line fuse - The machine control system complies with the applicable regulations DIN VDE 0660 Part 500 Edition 04.91 - Standards complied with EN 60 204-1 / EN 60 439-1

Condition: used, magnet 400X170 Hsdoydnhpjpfx Adajh

Condition: used, magnet 400X170 Hsdjydngxopfx Adaeh

Condition: used, Year of construction: 2000, input voltage: 400 V, * Manufacturer: LÖWER * Machine No.: 10068 * Year of manufacture: 2000 * Type: KFM (see manufacturer's brochure) * Weight: 220 kg * Full load current: 18 A * Connection: 3~ three-phase, 400 V, 50 Hz Hjdpfsydm A Esx Adaoh * Protection: on-site protection 25 A The machine was used in our production facility until the end of operations, always running reliably and without issues. The balls have been replaced. The machine is ready for use and shows minimal signs of wear. Technical specifications can be found in the attached PDF. Collection from 41334 Nettetal.

Condition: repair required (used), Type AS - 900 Machine No. 74054 Centre distance 900 mm Centre height 150 mm Hedoydfu Tjpfx Adaoh Max. grinding wheel 400 x 80 x 127 mm Centre height 150 mm Centre distance 900 mm ..... Condition: The machine cannot be switched on! The following applies to this machine: Condition unknown! Scope of delivery as per attached images ....

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, grinding length: 6,000 mm, grinding width: 1,100 mm, total height: 700 mm, total length: 6,650 mm, total width: 1,050 mm, grinding height: 830 mm, grinding wheel diameter: 610 mm, table load: 9,000 kg, grinding wheel width: 150 mm, overall weight: 39,200 kg, grinding spindle motor power: 40,000 W, grinding wheel speed: 960 rpm, space requirement height: 3,410 mm, space requirement length: 16,500 mm, space requirement width: 3,710 mm, Equipment: documentation/manual, CNC SIEMENS SINUMERIK WORKING CAPACITY: Max length mm 6000 Max width mm 1100 Max height mm 700 GRINDING WHEEL HEAD: Power HP/kW 40/30 Grinding wheel dimensions (diam. x bore x width) mm 610x304.8x150 Wheel speed rpm 960 LONGITUDINAL TABLE AXIS: Speed m/min 1–40 Max load (without magnetic chuck) kg 9000 Max load (with magnetic chuck) kg 6150 Table size mm 6000x900 Useful travel mm 6150 Total travel mm 6650 HEAD CROSS AXIS: Rapid traverse speed m/min 5 Stepped feed adjustment mm 1–50 Infinitely adjustable feeds mm 0–2000 Min. working increment mm 0.001 Useful travel mm 950 Total travel mm 1050 HEAD VERTICAL AXIS: Rapid traverse speed m/min 1 Min. working increment mm 0.001 Useful travel mm 730 Total travel mm 830 APPROX. DIMENSIONS: Hedsydfc Dopfx Adash Length mm 16500 Width mm 3710 Height mm 3410 APPROX. WEIGHT: Total weight kg 39200 Approx. total installed power kW 50 USED MACHINE

Condition: good (used), Year of construction: 1987, functionality: fully functional, Jung JF 520 MS 1987 magnet 175 x 450 mm max. grinding range 600 x 220 mm variable magnetic force variable speed creep feed grinding automatic feed for plunge and surface grinding diaform Hodpfx Ajydd S Djdash 4x grinding flange with wheel documentation machine powered for inspection.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, grinding length: 2,000 mm, grinding diameter: 630 mm, grinding diameter 630 mm grinding length 2000 mm centre height 315 mm grinding wheel diameter x bore x width 750 x 100 x 305 mm Hsdpfx Adoydd H Ujajh grinding wheel dia. according abrasion 610 mm swing in open rest 250 mm swing in closed rest 350 mm taper bore of workpiece spindle 6 Morse taper of tailstock quill 6 Morse Diameter of chuck ca. 315 mm 100 mm

Year of construction: 1974, condition: used, Grinding machine Hodpfxsydc N Ue Adaeh

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2025, Drill grinding machine suitable for grinding/sharpening twist drills, countersinks, etc. with 2, 3, or 4 cutting edges, with diameters from 5 to 75 mm. The machine has been mechanically and technically overhauled, wearing parts replaced, grinding spindle new, newly painted. The machine features automatic feed including end stop. Accessories: - Reducing sleeves MK5/MK4/MK3/MK2/MK1 including new quick-action chuck for small diameters Hedpfxjydc Hto Adaoh - Diamond dresser - Operating manual - Ejector tool for MK5 to MK1 - Coolant system, new including new coolant pump - Machine LED light, new The machine can be tested under power or inspected upon request. Operating voltage: three-phase current

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: RU2000, center height: 335 mm, workpiece weight (max.): 280 kg, grinding length: 2,100 mm, grinding wheel diameter: 610 mm, grinding diameter: 650 mm, quill diameter: 80 mm, feed length X-axis: 460 mm, grinding spindle speed: 4,420 rpm, overall weight: 20,000 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece spindle speed (max.): 750 rpm, We offer this used AZ RU2000 cylindrical grinding machine, year of manufacture 2019. Rated voltage: 400 V Frequency: 50 Hz Pneumatic pressure: 6 bar Hedpfsydagdsx Adash Rated power: 110 kVA Maximum current draw: 160 A Machine weight: 20,000 kg The machine is configured for external grinding with CBN and Corundum wheels, featuring two wheel spindles on a freely positionable B-axis turret. CNC Siemens 840d. The machine is prepared for integration with automatic hydraulic steady rests and for connection with an automatic loading and unloading system.

Condition: new, Year of construction: 2025, weight 540 kg diameter 1200 mm height 1100 mm 0 382 l total power requirement 1,9 kW voltage 350/50 V length in total 1820 mm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. Hedpfxsuddbvj Adash This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2025, weight 340 kg diameter 960 mm height 980 mm 0 219 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories Hodpfxet U Sffe Adajh - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2025, weight 1350 kg diameter 1760 mm height 1240 mm 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control Hjdsuddctspfx Adash - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2025, weight 800 kg height 1180 mm 0 502 l length 1800 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz engine output 2,5 kW The VKT-500 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 500 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. Hodpfxouddmfj Adaoh

Condition: new, Year of construction: 2025, weight 2600 kg height 1550 mm 0 2197 l length 3800 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz Hsdpfx Ajuddi Tedaeh engine output 2 x 7 kW The VKT 2200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 500 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, Year of construction: 2025, cutting speed 35 m/s grinding height 210 mm workpiece length / mm weight of the machine ca. 210-260 kg Hsdpfx Adsvuuvkeash required space 1100 x 760 x 860 mm The G115 Surface Grinder is a compact grinding machine designed for processing the circumference or face of the grinding wheel on the horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, inclined or shaped surfaces can also be processed. The machine is ideal for small businesses, maintenance industries, home workshops, laboratories, teaching demonstrations, and more. TECHNICAL DATA Maximum cutting amount: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal stroke of the worktable: 340 mm Transverse travel of the worktable: 170 mm T-slot of the worktable: 1-12 mm Outer diameter × inner diameter × thickness of the grinding wheel: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical feed handwheel interval: 0.025 mm Lateral feed handwheel interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Package size: 1100×760×860 mm FEATURES The worktable can be moved back and forth as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. The grinding head runs smoothly. Compact design with low noise. The machine is lubricated by a manual oil pump. To lubricate, simply pull out the handle. Work cabin is available separately. If you need any other special accessories to improve work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: From the proximal end of the main spindle to 100 mm, the radial runout of the tapered hole axis is 0.01~0.02 mm.

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Hodpfxexxb Nbj Adajh total power requirement / kW weight of the machine ca. / t required space / m

Condition: used, Year of construction: 1979, grinding diameter 630 mm grinding length 4000 mm centre height / mm weight of the machine ca. 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG Hedpjvm Dzasfx Adajh HS-Code: 84602910 Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, ensuring top-notch results. With its reliable design and precise performance, this cylindrical grinding machine is ideal for processing a variety of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for companies striving for the highest quality standards in metal machining. Trust in the proven technology of STANKO to optimize your manufacturing processes and achieve superior results. Invest in the future of your production with the STANKO Cylindrical Grinding Machine 3M194 - the perfect combination of performance, precision, and reliability. Contact us today to learn more about this outstanding grinding machine and how it can meet your manufacturing requirements.

Condition: used, width of the strips / mm band length / mm Hjdpfowgi Tajx Adaeh band speed / m/min

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Hsdpfx Adsn Smbroaeh Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Hjdpfxsxb Uq Ds Adaoh Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve Hjdpfx Ajn Smclsdajh - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: used, BERCO CONVENTIONAL GRINDER | 700 MM X 2,300 MM Technical Specifications: Swing: 700 mm Distance Between Centers: 2,300 mm For maximum rigidity on a large scale, the Berco 2,300 mm series delivers the exact control required for high-tolerance industrial applications. A proven workhorse for professional workshops. Hodpfxoyc Ryfj Adajh

Condition: used, Used machine Condition: age-appropriate Table size: 2,600 x 900 mm Maximum usable grinding length: 2,500 mm Belt size: 7,100 mm x 150 mm 1,100 mm throat on the right Motor: 5.2 kW Hodjxwz N Sspfx Adaoh Shipping dimensions: 4,300 x 1,650 x 1,800 mm Weight: 620 kg Availability: approx. mid/end of January 2026 Stock location: Frankfurt