Used Cable for sale (3,907)

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, HAMOS KWS 1010-0 – complete electrostatic separation line We are selling a complete HAMOS KWS 1010-0 electrostatic separation line, including dust extraction, conveyors, hoppers, vibrating screens, and other accessories. The equipment is designed for dry electrostatic separation of conductive and non-conductive materials, particularly for separating metals from plastics and other non-conductive materials. It is suitable, for example, for processing plastic mixtures, cable waste, electronic waste, and other mixtures containing conductive and non-conductive components. The complete line includes: * electrostatic separator HAMOS KWS 1010-0 * dust extraction and filtration unit IGM PFLUX * large input hopper for material / big bag * conveyor for transporting material to the separation line * large vibrating screen * small vibrating screen * replaceable screens for preparing the desired 1 mm and 2 mm fraction * frame, hoppers, and other line accessories Material handling The large input hopper is designed so that it can be removed from the frame and transported to the desired location using a forklift. This allows the material from the big bag to be emptied into the hopper outside the line itself, and then the hopper can be placed back on the frame. From there, the material is transported to the next part of the process. HAMOS service and modernization The separator itself underwent service and modernization work directly at the HAMOS manufacturer in 2024. Kdsdpfszvgm Hex Ah Ejt As part of these works, the following were carried out, among other things: * new dust extraction solution * electrode cleaning adjustment * installation of a new control unit * other service and refurbishment work The line is available immediately. We prefer to sell the complete technology.

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Kdjdpfxez Abkyo Ah Eet

Condition: used, Year of construction: 2000, functionality: fully functional, operating hours: 32,590 h, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, Operating hours: 14,150 hours Kdjdpfxsu Ut A Ds Ah Ejt Power on hours: 32,590 hours Sensor cable and motor for tool changer – new Price upon request Various tools available; if interested, we will gladly send you pictures and a quote. Packaged for shipping.

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Automatic change table system Filter extraction system Kdsdpfxszz A A Ie Ah Ejt Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Inspection while the system is running is welcome.

Condition: used, “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Kdsdpfxozr Ucns Ah Eot Quantity: 2 available Manufacturer: Lapp Kabel Stuttgart Type: 0027969 Length: 9 m Description: High-quality Lapp control cable for industrial applications. Suitable for machine, plant, and control system engineering. Robust, flexible cable for permanent installations.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Manual winch Equipment: Net: €6,378.15 / Gross: €7,590.00 Article number: KTT227331600.01 Technical data: • Brand: Stedele • Model: KTT 27 • Vehicle type: Cable reel trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 330 x 163 x 0 cm • External dimensions (LxWxH): 499 x 247 x 265 cm • Loading height of the floor: 0 cm • Permissible total weight: 2,700 kg • Tare weight: 760 kg • Payload: 1,940 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable reels with a diameter of up to 2800 mm and a width of 1650 mm. • Standard tube holder approx. 80 mm • Torsionally rigid chassis with a massive receiving frame, hot-dip galvanized • Easy operation of the receiving frame with or without a cable reel • Barrier-free insertion of the cable reel • Play-free storage and securing of the reel by fixing • Massive support wheel holder and rear support • Stable telescopic crank supports at the rear • Includes robust and maintenance-free manual winch, pulling force approx. 2,300 kg • Very stable steel frame, welded • Frame completely hot-dip galvanized • Robust aluminum checker plate fenders, walkable • Reversing automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Foldable license plate holder _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! Kdsdjzy Dvtepfx Ah Ejt _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric winch Equipment: Net: €8,306.72 / Gross: €9,885.00 Article number: KTT235331600.02 Technical data: • Brand: Stedele • Model: KTT 35 • Vehicle type: Cable drum trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 330 x 163 x 0 cm • External dimensions (LxWxH): 499 x 247 x 265 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Tare weight: 740 kg • Payload: 2,760 kg • Chassis: Low-loader (wheels beside the superstructure) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable drums with a diameter of up to 2800mm and a width of 1650mm. • Standard pipe mount approx. 80mm • Torsionally rigid chassis with a solid mounting frame, hot-dip galvanized • Easy operation of the mounting frame with or without a cable drum • Barrier-free insertion of the cable drum • Play-free bearing and securing of the drum by fixing • Solid support wheel mount and rear support • Stable telescopic crank supports at the rear • Electric winch instead of manual winch for handling cable drums • Battery installed in a box • Incl. charging cable from the towing vehicle via a 13-pole plug • Very stable steel frame, welded • Frame completely hot-dip galvanized • Robust aluminum tread plate fenders, walkable • Reverse automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Folding license plate holder _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Kdjdpfx Ahjzy A A Eo Eet Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Functionally tested; item originates from the dismantling of equipment from an automotive supplier. Kodpfjzmm Nisx Ah Ejdt Manufacturer: Igus Type: i6FX8002-5DQ38 Description: Chainflex signal cable from Igus, suitable for Siemens controllers. Specifically designed for moving applications and energy chains, offering a long service life.

Condition: used, Year of construction: 2008, operating hours: 34,160 h, functionality: fully functional, overall weight: 1,040 kg, load capacity: 60 kg, controller model: IRC5, The IRB 4400 serie is ABB Robotics latest generation of high payload, high performance industrial robots. With a focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 4400 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Kedpswf U T Aofx Ah Ejdt Year: 2008 (Multiple options available) Cabinet: IRC5 Teach Pendant: Included Condition: Used & Painted Signalling & Power Cables: Included (15m) Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman. (Source: ABB's Website)

Condition: excellent (used), mileage: 142,744 km, first registration: 06/2019, fuel type: diesel, axle configuration: 8x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - Low noise - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Reversing camera - Sleeper cab - Sun visor - Stability control - Toolbox - PTO (power take-off) - Towing jaw = Further Information = Technical Details Number of cylinders: 6 Engine capacity: 12,742 cc Unladen weight: 18,043 kg Transmission Gearbox: OPTICRUISE, automatic Axle Configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Twin wheels Rear axle 2: Lift axle; steering Functional Lifting capacity: 10,000 kg Lifting height: 1,750 cm Crane: HIAB X-HIPRO 362 EP-5, mounted behind the cab Body manufacturer: SAWO CABLE LIFT 326 3W 20 TON Condition Technical condition: very good Visual condition: very good Kdjdpfxouxuthe Ah Est Financial Information Price: On request SCANIA G500 NGS 8X2 + SAWO 3-SIDED CABLE SYSTEM + HIAB X-HIPRO 362 EP-5 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X2 WITH LIFTABLE AND STEERABLE LAST AXLE AIR SUSPENSION WHEELBASE 560 CM CG20N SLEEPER CABIN WITH AIR CONDITIONING, NAVIGATION, FRIDGE, CAMERA AUTOMATIC GEARBOX WITH ENGINE BRAKE TRAILER COUPLING WITH HYDRAULIC CONNECTIONS SAWO 3-SIDED CABLE SYSTEM 20 TONNES NUMEROUS TOOLBOXES HIAB X-HIPRO 362 EP-5 CRANE 5X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5+6 FUNCTIONS ON THE CRANE ROTATOR OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 10,000 KG MAX LIFTING CAPACITY AT 1500 CM: 1,860 KG MAX WORKING HEIGHT: 1,750 CM ONLY 711 OPERATING HOURS!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: new, *IMMEDIATELY AVAILABLE* Kdedpfx Aszy Akveh Eet Includes: Electric winch, microroll mounting Equipment: - Welded frame - Microroll mounting - Electric winch Net: €9,735.29 / Gross: €11,585.00 Article number: KTT235331600.22 Technical data: • Brand: Stedele • Model: KTT 35 • Vehicle type: Cable drum trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 330 x 163 x 0 cm • External dimensions (L x W x H): 499 x 247 x 265 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 740 kg • Payload: 2,760 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Microroll frame hot-dip galvanized - Shaft diameter approx. 60 mm - Accommodates several small cable drums • Designed for cable drums up to a diameter of 2800mm and a width of 1650mm. • Standard roll mounting approx. 80mm • Torsionally rigid chassis with massive mounting frame, hot-dip galvanized • Easy operation of the mounting frame with or without a cable drum • Barrier-free insertion of the cable drum • Play-free bearing and securing of the drum by fixing • Massive support wheel mounting and rear support • Sturdy telescopic crank supports at the rear • Electric winch instead of manual winch for accommodating cable drums • Battery installed in a box • Incl. charging cable from the towing vehicle via a 13-pin connector • Very stable, welded steel frame • Frame completely hot-dip galvanized • Robust aluminum tread plate fenders, walkable • Reversing automatic • ALKO overrun device and parking brake • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • License plate holder _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibrating and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior design companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm Contact roller can be pneumatically adjusted, low wear due to ribbed steel roller Grain size compensation Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed speed can be steplessly adjusted via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the discharge end Kdjdpjzqvmrofx Ah Eet Constant working height of 900 mm by adjusting the upper part of the machine, thus can also be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm Workpiece height approx. 3 to 150 mm Common sanding belt dimension: 1360 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable discharge table Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar setting points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibrating roller. CE marking Operating manual Without the illustrated connection cable Original paint, only retouched in some areas Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Condition: excellent (used), mileage: 209,020 km, power: 390 kW (530.25 HP), first registration: 11/2020, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,460 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional options and equipment = - Aluminum fuel tank - Brake booster - High beam headlights - Speed limiter - Refrigerator - Air suspension - Particulate filter - Rearview camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system - Towing jaw = Further information = Technical specifications Number of cylinders: 6 Engine displacement: 12,809 cc Axle configuration Brakes: Disc brakes Front axle 1: Tyre size: 385/65/22.5; Max. axle load: 8,000 kg; Steered; Suspension: Leaf spring Front axle 2: Tyre size: 385/65/22.5; Max. axle load: 8,000 kg; Steered; Suspension: Leaf spring Rear axle 1: Tyre size: 315/80/22.5; Twin tyres; Differential lock; Max. axle load: 11,500 kg; Suspension: Air suspension Rear axle 2: Tyre size: 385/65/22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Suspension: Air suspension Weights Unladen weight: 16,545 kg Payload: 15,455 kg Gross vehicle weight (GVW): 32,000 kg Functional Lifting capacity: 5,330 kg Lifting height: 1,460 cm Crane: HMF 2820, year of manufacture: 2020, mounted behind the cab Condition Ksdpfoyiun Tox Ah Eedt Technical condition: Very good Optical condition: Very good MERCEDES-BENZ AROCS 3253 L ENA 8X2/4 HMF2820 CRANE WITH TF.324 CABLE SYSTEM EURO 6 530 HP DRIVELINE ENA 8X2/4, 4TH AXLE LIFTED/STEERED TECHNICAL PERMISSIBLE GROSS VEHICLE WEIGHT (GVW) 35,000 KG WHEELBASE 530 CM DAY CAB WITH AIR CONDITIONING 27MC, REFRIGERATOR BOX REARVIEW CAMERA AUTOMATIC TRANSMISSION TRAILER COUPLING FOG LIGHTS HMF2820 K5 POWER-OPERATED CRANE MAX. LIFTING HEIGHT 14.6 M MAX. LIFTING CAPACITY AT 4.6 M: 5,330 KG MAX. LIFTING CAPACITY AT 14.7 M: 1,410 KG 5-6 FUNCTION HMF TF.324 CABLE SYSTEM LOADING LENGTH: 600 CM, WIDTH: 246 CM 2 X SIDE BOARDS WITH HYDRAULIC CONTROL

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply - Siemens SCALANCE X208 - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. Kdedpezyyynofx Ah Eet RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Kedezx Uwxspfx Ah Esdt Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 200 h, machine/vehicle number: 31015, control type: PLC-controlled, degree of automation: manual, actuation type: manual, controller manufacturer: 4JET, overall weight: 350 kg, total length: 1,310 mm, total width: 525 mm, total height: 1,454 mm, power: 200 kW (271.92 HP), laser hours: 200 h, compressed air connection: 5 bar, laser power: 200 W, laser wavelength: 1,064 nm, type of cooling: water, laser type: fiber laser, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, We offer a non-contact, mobile laser cleaning system, model 4JET M200, which was used solely for demonstration and testing purposes. We also offer a wide range of accessories, including: fiber extension cables (3m to 10m), 5 pieces; laser safety goggles; and a mobile laser protection curtain with frame. Kdodpfezlrzzjx Ah Eet

Condition: good (used), mileage: 1,038,505 km, power: 331 kW (450.03 HP), first registration: 01/2015, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 6,250 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, number of seats: 2, total length: 8,940 mm, total width: 2,550 mm, total height: 3,610 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, trailer coupling, - 2. Diesel tank - Heated mirrors - Digital tachograph - Driver's cab recorder (control unit) - Fixed - Halogen lamp - Highline - Manual - Auxiliary drive - Pump - Radio/cassette - Fabric - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Payload: 15320 kg, Tare weight: 11680 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 1050 liters, 2. Diesel tank, Trailer coupling, Trailer load, unbraked: 750 kg, Axle pin diameter: 50 DIN, Chassis material: Steel, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling force: 2 tons, Suspension type: Air suspension, Cabin type: Highline, Cruise control, Driver's cab recorder (control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Engine power: 331 kW (444 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, Auxiliary drive, PTO type: 1, Superstructure year: 2014, System length: 644 cm, Manufacturer of hooklift and cable system: HTS, System type: 2525.5.130, Pump, Central locking, Seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Tire tread depth left: 13 mm; Tire tread depth right: 12 mm Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 14 mm; Tire tread depth left outer: 14 mm; Tire tread depth right inner: 14 mm; Tire tread depth right outer: 13 mm Axle 3: Tire size: 385/55R22.5; Lift axle; Steerable; Tire tread depth left: 8 mm; Tire tread depth right: 10 mm Weights Unladen weight: 11,680 kg Payload: 15,320 kg GVW: 27,000 kg Functional Load area height: 124 cm Pump: Yes Maintenance MOT (Periodic Technical Inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: 54-BFN-1 Kleyn Trucks is one of the world's largest independent traders in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Fair trading practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty... Kedpfxszqalrs Ah Eodt

Condition: ready for operation (used), Year of construction: 2019, operating hours: 600 h, number of axes: 2, Plasma cutting machine manufactured in 2019. This KOIKE PNC-12 Extreme features an effective cutting area of 1,500 x 3,000 mm and a maximum programmed cutting speed of 3,000 mm/min. It includes a robust downdraft cutting table and a Cebora plasma power source with a maximum cutting current of 110 A. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE PNC-12 Extreme machine we have for sale. Contact us for further details. • Operating hours: approx. 600 h • Condition: Excellent • Effective cutting area: 1,500 x 3,000 mm • Rapid travel speed: 4,000 mm/min • Maximum programmed cutting speed: 3,000 mm/min • Drive system: Rack-and-pinion X/Y with linear guides • Control unit: KOIKE D420, 7-inch colour display, USB and manual program input • Torch control features: Initial height sensing, arc-voltage height control, collision/breakaway protection • Plasma cutting performance: • Maximum cutting current: 110 A • Recommended mild-steel cutting capacity: up to 35 mm • Maximum cut: approx. 40 mm • Maximum severance: up to 50 mm • Mild-steel piercing capacity: up to 20 mm • Duty cycle: 90 A at 100% / 95 A at 60% / 110 A at 50% • Oxy-fuel cutting performance: • Mild-steel cutting capacity: up to 80 mm (depending on nozzle, gas type, material and cutting conditions) • CNC-controlled piercing sequence Additional equipment • Plasma power source: Cebora Plasma Sound PC 110/T (Art. 336) • Machine torch: Cebora automatic torch with approx. 10 m cable package • Oxy-fuel: Original KOIKE motorised oxy-fuel cutting torch; automatic gas solenoid valves Kdodsz Dhqaspfx Ah Est • Downdraft cutting table: Sideros Engineering Sirion 1000 (2019), S/N 1027/19 • Max air pressure: 6 bar • Max table load: 500 kg/m² • Design: Sectional/zoned downdraft table with central extraction channel • Nesting/CAD-CAM software on USB drive • Available documentation and accessories

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: Kdjdpfxozp Nz Tj Ah Est ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us. Kodpfxozrmigj Ah Esdt

Condition: excellent (used), Year of construction: 2017, operating hours: 267 h, functionality: fully functional, KUKA KR10 R1100 sixx robot with KRC4 controller - orange 1 x Serial number 508436, only 267 operating hours 1 x Serial number 508438, only 273 operating hours Ksdezmt Ulopfx Ah Eodt Year of manufacture: 03/2017 Number of axes: 6 Max. payload: 10 kg Max. working range: approx. 1100 mm Scope of supply: Robot, controller, cables, teach pendant Price is per robot. Used item – normal signs of wear. Further details, article numbers and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to abroad upon request – please specify country, city, and postal code. Freight costs upon request – please specify delivery address.

Condition: excellent (used), mileage: 422,117 km, power: 315 kW (428.28 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 470 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 8,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking air conditioner, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - Speed limiter - Air horn - Parabolic suspension - Particulate filter - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Towing jaw = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,677 cc Axle Configuration Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Weights Unladen weight: 14,110 kg Payload: 29,890 kg Gross vehicle weight: 44,000 kg Functionality Body brand: VDL S-30-6600 Condition Technical condition: Very good Visual condition: Very good Identification License plate: 61-BKH-9 MERCEDES-BENZ AROCS 8X4 VDL S-30-6600 HOOKLIFT TIPPER EURO 6 430 HP 8X4 DRIVE WHEELBASE 485 CM FULL LEAF SUSPENSION DIFF LOCK AUTOMATIC WITH ENGINE BRAKE TRAILER COUPLING VDL S-30-6600 HOOKLIFT TIPPER HYDRAULIC CONTAINER LOCKING TOOLBOX FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR FORKLIFTS AND MACHINES FOR SALE. WE SPEAK GERMAN Kdodpfxowhprrs Ah Eet WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU ГОВОРИМО УКРАЇНСЬКОЮ

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, Kdodpfx Ahezt Hmze Eet • paper and cardboard, • textiles, • cables, • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, ROTER BERG / Polishing machine - Spindle stock - Infinitely variable speed control, 200 - 1200 rpm - Automatic brake - Chuck diameter 200mm & interchangeable jaws - Center height approx. 300mm - Drive power 0.75 kW - Connection cable Kedpfx Aezwva Eeh Ejdt Dimensions: L x W x H 0.6 x 0.5 x 0.4 meters / Weight 95 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Kedpozu Rzfofx Ah Esdt Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.