Used Butchers Bandsaw for sale (451)

Condition: new, capacity 90 degrees: round 105 mm capacity 90 degrees: square 100 mm 100 x 105 dimensions of saw-band 1335 x 13 x 0,65 mm dimensions 650 x 310 x 300 m band speed 30 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg Action Price!! Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Bjdofv Aq Repfx Ak Eswl Miter cuts up to 60° Share of freight costs: EUR 25.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one Bjdpefg E Hpjfx Ak Eewl high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° Bwoded Iiptjpfx Ak Ejl • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right Bwsdpfxjd Iip Rj Ak Eel - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Bedped Iip Uofx Ak Ejwl Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1 x Reich GmbH stainless-steel fixed table bandsaw for cutting typically used for cutting meat. Supplied with several spare parts and new blades. Model - Profi 400. Bsdpfxsyzxd Ro Ak Eswl Serial number - 400 1141. Date of manufacture - 2005. Size of blade - 3204mm x 16mm. Electrical requirements - 400 V / 50 hz / 3 phase.

Condition: excellent (used), Year of construction: 2020, Complete sawmill for pallet lumber consisting of: 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory log input measurement system by Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter from 20 - 90 cm. 2. Sawmill: Möhringer band saw, running bandsaw with Flexi Drive carriage. Slab scanning unit. Round timber intake with step-by-step singulation. Laser measurement by Bidac. Kallfass cross-cut unit. Resaw: EWD Optimes with chipper canter and double arbor saw NKU. Brodbaek edger system. Stacking system for main products, empty pallet handling for both main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electric and electronic control cabinets, etc. Waste disposal. Detailed plans or video can be provided upon request. Bwodpfx Aksx T Azwo Esl

Condition: excellent (used), Year of construction: 2007, cutting diameter 220 mm total power requirement 0,7 kW Bodpjyw Ti Tofx Ak Ejwl weight of the machine ca. 0,240 t

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Very neat twin-column automatic bandsaw with NC control on the length measuring system. Capacity Ø 360 mm; max. height 360 mm; max. width 380 mm. Saw blade dimension: 4430 x 34 x 1 mm. Infinitely variable band speed from 25 to 112 m/min. Main motor 3.75 kW, total power 4.7 kW. Single feed stroke 500 mm, multiple up to max. 4500 mm. Machine equipped with chip conveyor, powered chip brush, and bundle clamping device. Bwsdpjyzcacsfx Ak Ejl

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm Bwedpfx Akovf N Suo Eol weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Bwsdpfx Akow N S Ece Ejl Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm

Condition: refurbished (used), Year of construction: 2011, Used automatic metal band saw MEP SHARK 282 nc evo Year of manufacture: 2011 Blade dimensions: 2950x27x0.9mm Cutting angle: from -45° to +60° Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Blade cutting speed: from 15 to 100m/min Cutting capacity at 0°: - round 250mm - square 220mm - rectangle 280x220mm Machine weight: 980kg Bedsykvg Hspfx Ak Eowl The machine is fully refurbished.

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads Bwjdpfx Aovwbg Uek Ejl 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: used, functionality: fully functional, Band Saw Blade Sharpener PERFECTA Specification: • condition - used, after maintenance • manufacturer - PERFECTA • 0.75 kW motors (3-phase) • grinding angle adjustment range 0-10 degrees Bedpfxjyy Sdbj Ak Eewl • original paintwork • body dimensions - 50 x 50 x 130 cm (width x length x height) Additional information: • the machine is in good technical condition, ready for immediate use • the displayed photos show the actual condition of the sale item • possibility to turn on and test the device on site • the auction price does not include VAT or transport costs Financing and transport: • we organize transport via MDD fleet, courier companies, or external carriers • we offer financial support in the form of leasing or lease loan

Condition: used, functionality: fully functional, Band Saw Blade Sharpener OSAMA Specification: • Condition – used, after inspection • Manufacturer – OSAMA • Motors with 0.75 kW power (3 phase) • Grinding angle adjustment from 0 to 15 degrees • Original paintwork • Body dimensions – 50 x 50 x 130 cm (width x length x height) Bodpeyy Nqxjfx Ak Eswl Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power on and test the machine on site • The price listed in the auction does not include VAT or transport costs Financing & Transport: • We organize transport via MDD fleet, courier companies, or external carriers • Financing options available in the form of leasing or lease credit

Condition: used, Year of construction: 1999, dimensions of saw-band 4200 x 34 x 1,1 mm saw band length 4200 mm cutting speed 15 - 150 m/min capacity 90 degrees: round 325 mm capacity 45 degrees: round 300 mm capacity 90 degrees: flat 500 x 300 mm capacity 45 degrees: flat 300 x 300 mm cutting speed 15 - 150 m/min Working height 750 mm Bjdpfoyv Nk Djx Ak Ejwl dimensions 1300 x 2050 x 1400 mm

Condition: new, Technische Daten: fly wheel DM 800 mm Max. cutting height 400 mm Max. max cutting width 780 mm tabel dimensions 580 x 810 mm tildable table 15 Grad Max. saw blade dimension 80 x 0,8 mm saw blade length 5380 - 5530 mm motor 11,0 kW, 400 V, 50 Hz suction 2 x 100 mm fly wheel speed 680 U/ min suction DM 1 x DM 100 mm & 2 x DM 120 mm compressed air 6 - 8 bar machine weight: ca. 850 kg machine dimensions L x B X H 1550 x 950 x 2500 mm welded steel structure, fully closed pneumatic brake table in cast iron upper & lower saw blade guide star triangle switch emergency push button telescopic saw blade guard/ guide work table tillable 20 deg. saw blade cooling/ cleaning device with diesel tank saw blade tension indicator cleaning brush for fly wheels solid work piece fence cast iron fly wheels motor circuit protection switch Bwjdoby U Dpopfx Ak Eel CE CENTAURO Model RVP200 feeder roller height 160 mm work piece fence with rollers height 160 mm var. feed speed 1 - 21 m/ min pneumatic opening / closing of feeder Max distance saw blade - feeder approx 220 mm Max. distance saw blade - work piece fenceapprox . 200 mm CE

Condition: used, power: 2.2 kW (2.99 HP), cutting height (max.): 340 mm, cutting width (max.): 600 mm, total height: 2,350 mm, total length: 1,200 mm, total width: 800 mm, overall weight: 500 kg, No. 04515 Bandsaw HEMA PH 630 Used Roller diameter 630 mm Motor 2.2 kW, with electric brake Table dimensions with extension 930 x 660 mm LW Cutting height approx. 340 mm Cutting width approx. 600 mm Bjdpfx Akoyvifno Ejwl Transport dimensions approx. 1200 x 800 x 2350 mm LWH Weight approx. 500 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm Bodpfx Ajxw T Ugek Eswl - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Bsdpfofg E H Nox Ak Eewl Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: used, Infeed mechanization TWIN double-frame sawmill edger Blade diameter: 120 mm Bwjdoyxywtspfx Ak Eel

Condition: new, Semi-automatic bandsaw with double-sided mitre cutting R/L 60° including hydraulic blade tension indicator Option for retrofitting minimum quantity lubrication Cutting capacity 90° round 280 mm / flat 410 x 280 mm / square 280 mm 45° right round 280 mm / flat 310 x 150 mm / square 270 mm 45° left round 280 mm / flat 330 x 100 mm / square 280 mm 60° right round 210 mm / flat 205 x 100 mm / square 190 mm 60° left round 220 mm / flat 225 x 100 mm / square 210 mm Material support height 756 mm Bwsdod Dpzgepfx Ak Eel Saw blade dimensions 3800x0.9x27 mm Cutting speed 20-120 m/min Drive power 2.2 kW Dimensions LxWxH 2130 x 1070 x 1440 mm Weight 530 kg Price on request

Condition: new, Year of construction: 2025, functionality: fully functional, saw band length: 4,242 mm, High-performance fully automatic band saw in robust double-round column design and full enclosure. Developed for the highest sawing requirements. Technical Data: Cutting range Ø 325 mm or 380 x 325 mm Saw blade dimensions 4242 x 34 x 1.1 mm Saw drive 3.75 kW Working height approx. 820 mm Weight 2200 kg Connection 400 V-50 Hz Including technical features: - Smart NC control with 5.7" HMI touch screen for up to 100 different programs - V-Drive - Mitsubishi PLC control - Display of improper operation in plain text - Frequency-controlled saw drive 15–100 m/min - Material database for easy setting of cutting parameters - Digital display of saw feed rate in mm/min and cutting performance in cm²/min - Display of saw frame position in mm - Automatic cut-in, selectable with or without front cut. Length of the front cut is freely programmable - LED strip work light - LED signal tower for visualizing machine status - Automatic band guide arm positioning - Vibration damping roller for vibration-free sawing - Hydraulic, adjustable chip conveyor - Clamping pressure regulation for both vices - Hydraulic saw blade tensioning with band breakage monitoring sensor - Coolant device with additional cleaning nozzle - Saw cut detection via rapid advance button - Manual material positioning with slow-motion function - Automatic cutting pressure regulation, pre-settable based on material quality - Material retraction after completion of cut to protect the saw blade during upward movement - Integrated material support on the infeed side, approx. 1,500 mm Bjdpfx Asbrxk Usk Ejwl - Discharge table with coolant return, approx. 500 mm

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: Bwjdpfeu R S Aksx Ak Ejl 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: good (used), Year of construction: 2002, MEP automatic bandsaw Model Shark 320 AXI Year : 2002 Capacity round : 260 mm. Bwedpfx Aoyvzvxek Esl Capacity 45 / 60 degrees : 230 mm. / 150 mm. Capacity square. : 320 x 220 mm. Speed: 40 - 80 m./min.