Used Bulk for sale (682)

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. Nedozba Nyjpfx Ahkjda With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 7.5 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 7.5 m Ndsdsf Ekncjpfx Ahksa Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, type of input current: three-phase, Semi-Automatic Bagging Machine with 5 m³ Hopper – Bags 1-50 kg / Big Bags 1500 kg Industrial semi-automatic bagging station with a large-capacity hopper and a double weighing system, designed for the dosing and packaging of bulk materials into bags and big bags. This machine is particularly suitable for plants handling agricultural products, fertilizers, animal feed, chemicals, minerals, pellets, granules, and powders. Thanks to the two independent scales, it is possible to simultaneously fill small bags and big bags, significantly improving the productivity of the packaging line. The product is extracted from the 5 m³ wide-mouth hopper via two independent belt conveyors with gear motors, with continuous flow rate adjustment to ensure precision and control in dosing. The robust structure is designed for industrial use and features attachments for lateral and rear forklift access, allowing for easy and quick handling within the facility. Key advantages Double independent weighing for increased productivity Simultaneous filling of bags and big bags High weighing accuracy ±100 g 5 m³ hopper for mechanical shovel feeding Continuous adjustment of material flow rate Suitable for numerous granular or powdery products Easily movable structure with a forklift Complete, ready-to-use system with a bag sealer and conveyor Applications Fertilizer packaging Animal feed and agricultural products Plastic granules Minerals and sands Industrial powders Pellets and bulk materials Technical data Model: ARK03 Type: Semi-automatic bagging machine with hopper Hopper capacity: 5 m³ (filled) Hopper dimensions: 3000 × 2000 mm Machine dimensions: 5000 × 2100 × 2350 mm (L × W × H) Nodpfxod Nqmlo Ahkeda Weight: approximately 700 kg Weighing accuracy: ±100 g Packaging formats Small bags: 1 – 50 kg Big bags: up to 1500 kg Supported big bag heights: 100 cm / 150 cm Feeding system 2 independent belt conveyors with gear motors Continuous adjustment of material flow rate Equipment Bag sealer on adjustable platform Support conveyor Control panel User manual Power supply and certifications Power supply: 400 V – 5P – 16 A CE marking Production: Made in EU ✔ Ideal solution for industrial bagging lines that require precision, versatility, and the handling of bags and big bags with a single system.

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Nsdpfx Ahegau Uqjksda Bolted Silos Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix have succeed to install bolted silos in Peru, Israel, Germany and United Kingdom.

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Nedpsgau U Asfx Ahkoda Bolted Silos Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix has succeeded to install bolted silos (which's capacities of more than 500 tons) in Peru, Israel, Germany, Dubai, and United Kingdom.

Condition: used, functionality: fully functional, fuel type: electric, Year of construction: 2018, operating hours: 1,080 h, drive type: Elektro, Wheel loader Technical condition: good Njdpfsu D Ruxjx Ahkjda Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, pallet forks

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. Nsdpfjdubpuox Ahksda This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Year of construction: 2025, condition: new, hydraulic bin tipper for fruit bulk bins (1.2 x 1.0 meter) Nsdpfxjykhbe Ahksda lifting capacity: 500 kg outlet regulated with slider stainless-steel construction

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser Njdpfsl Sm Npox Ahkjda QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 4.5 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. Njdsl Uxkqopfx Ahksda • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. Ndjdpfx Ajl Uxtvjhksa • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 6m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture Njdpfjl Uxwcox Ahkoda • Bulk timber cutting Model: T460 Length: 6 m Linear Unit: ProfiStop Omicron Material Length: 5230 mm Pushing capacity: 60 - 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation Nodpsmcaawjfx Ahkoda • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Timber Saw 8 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture Njdpfx Ajmccnljhksda • Bulk timber cutting Model: T460 Length: 8 m Linear Unit: ProfiStop Omicron Material Length: 7230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Nodpfjmdqrkox Ahkeda Model: A700 Length: 4.5 m Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DMN-WESTINGHOUSE PTD plug-type deflectors are specially designed for conveying powder and pellets with minimal degradation in pneumatic conveying systems. PTD plug type baffle is used in chemical, pharmaceutical, plastic, food and other related industries. The smooth passage of products is guaranteed by precision machining, good sealing and completely unobstructed passage. The user-friendly, foolproof design enables quick in-situ internal inspection, cleaning and replacement of seals if necessary. The PTD design complies with all applicable workplace safety legislation. Consequently, there are no moving parts on the outside. Pressure up to 3 bar g with static seals PTD 80 Nedpjmgb Hhsfx Ahksda Aluminum housing, tube stainless steel Ø 76.1 x 2.0 mm Pneumatic operation 5/2 with two-way valve 2 coils 24 V DC With 2 inductive limit switches

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors Ndedpfsgvqz Iex Ahkea - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Condition: used, Conveyor belt, trough conveyor, trough feeder, presumably GASUS type FB 400 x 5500 Nsdpfxohz U Azo Ahkoda Belt conveyor, transport conveyor, band conveyor Factory number: F, Year of manufacture: 1996 Useful length: 5.5 meters Belt width: 400 mm Pulley diameter: 225 mm Pulley width: 450 mm Belt speed: approx. 30 meters/min Motor power: 1.5 kW Mains connection: 400 volts, 50 Hz - Drive via tubular motor - Inlet hopper 600 x 400 mm - The support stations are 2-part trough-shaped - Metal support rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles - Smooth rubber conveyor belt - Sturdy tubular frame made of steel - Cover plate above the conveyor belt, removable - For horizontal or slightly inclined transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg Good condition

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   Ndsdpsghbkyofx Ahkea The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Year of construction: 2022, condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Ndsdpoh Utyrsfx Ahkja We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder adhesive binding machine with PUR with remote diagnostics with cooling and drying section with three-knife trimming system DGR D09 with compressor Base machine for solo or inline operation for connection with a three-knife trimmer Equipment - rotary feeder, integrated vacuum technology Winjector R - scoring station with split scoring tools for 2 and 4 grooves - feeder and pressing station including 1 set of standard pressing strips - ejector lift with gripper system for lightweight products - stack delivery (standing delivery) - industrial PC with TFT color display and touch screen function - graphical user interface Navigator E - motorized thickness adjustment * PUR spine gluing unit, mobile - Europe for the production of an adhesive-bound brochure with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR bulk melting system * Cooling and drying section * Hotmelt side gluing unit, mounted on the spine gluing unit * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of adhesive-bound products in offline and inline operation - Offline or inline operation possible Njdpsimqucsfx Ahkoda * Compressor system 1800 dm³/min.

Condition: new, Year of construction: 2025, Overband Magnetic Separator – Type DMPM 2000 | Industrial Version Manufacturer: die magnetprofis GmbH & Co. KG Model: DMPM 2000 Condition: New / unused Availability: Immediately ex stock ⸻ Technical Description: The DMPM 2000 overband magnetic separator is engineered for the reliable and continuous removal of ferromagnetic contaminants from product streams. It is ideally suited for use in recycling plants, bulk material processing, crushing plants, conveyor lines, and material processing facilities. ✅ Key Features: • Design: Cross-belt discharge with motor & discharge belt • Magnet type: Permanent magnet (maintenance-free) • Belt width: 650 mm Nodpfswx H E Dex Ahksda • Magnet length: approx. 2000 mm • Support structure: Robust welded steel construction • Drive: Electric motor with low-maintenance gearbox • Ready to operate: Pre-assembled, ready for operation, incl. lifting lugs • Options: Control unit in the form of a frequency converter, gallows for suspension ⸻ Fields of Application: • Recycling industry (metal, wood, construction debris, etc.) • Conveyor systems in the cement, energy, or waste sectors • Protection of downstream machinery (e.g., shredders, crushers, mills) • Food industry (optionally available in stainless steel version) ⸻ Scope of Delivery: • Overband magnetic separator DMPM 2000 (new unit) • Conveyor belt with drive unit • Suspension system (chains as required) • Documentation (operating manual, CE conformity) • Optional: Control – frequency converter Our core competence is delivering exactly what our customers truly need. Together with our customers, we develop tailored, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filtration systems

Condition: used, maximum load weight: 23,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 09/2025, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, Kotte combination trailer for slurry and bulk goods * Produced in 2015, new TÜV inspection and registration in 02/2019 Nedpfxswpyzgj Ahkeda * The slurry chamber at the bottom can be hydraulically raised to increase the tank volume. * Vogelsang slurry pump * Conveyor belt system at the top for unloading bulk materials * Hydraulic rear flap with slider * Grain-tight * The chassis and combination technology are fully functional * Air suspension * Self-steering axle For further information, we are happy to assist you.

Year of construction: 2020, condition: like new (used), With automatic feeding and removal. Workpieces are fed in as bulk material, inspected, and defective parts are sorted out. Good parts are then transferred as bulk material into containers. Workpiece: Bolts, Ø 6 - 12 mm Nedpfx Aslpcm Rshkoda Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - High-resolution matrix camera (21 Mp), dimension measurement - Line scan camera (4K), surface inspection Parts hopper SKAKO, 71 l volume Capacity: up to 125 kg New price: €230,000

Condition: new, functionality: fully functional, empty load weight: 6,500 kg, maximum load weight: 51,500 kg, loading space volume: 35,000 m³, tire size: 385/65 R 22,5, Year of construction: 2026, operation weight: 45,000 kg, chassis manufacturer: Lider, Equipment: ABS, Cement Tanker Semi-Trailer. Electric - Diesel Engine Compressor Lider Trailer for Heavy-Duty Trailers High Quality and Durability Manufacturing. EU Standards. EBS or Double Line Brake Systems. One-year Warranty. Customer Requested Colour. Ndsdpjrcb Rmofx Ahkoa 2026 Production