Used Bulk for sale (685)

Condition: excellent (used), 447 USED REIMELT: Automatic dosing system for bulk raw materials at the Reimelt bakery. EQUIPMENT: - 4 internal silos for flour, - 6 tanks, silos for mixes or flour. - 6 tanks for micro-raw materials, - mixers, - pumps, - raw material transport pipes, - bowl dosing station (hopper), - flour catcher, - water mixer, - water cooler, - automation control, THE SET IS A COMPLETE INSTALLATION. Paid options available: transport of the device. Klsdpfx Asziqqvop Aew Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2026, operating hours: 8 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Klsdpfx Apjxfwds Aow Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, functionality: fully functional, New device!! Special offer!!! New price: €160,000 Firing and thawing chamber for the pharmaceutical industry. Application Pharmaceutical and Bioprocessing. The Farrar Scientific Controlled Rate Chamber permits fast freeze/thaw from +40C to -80C, uniform bulk freezing and/or thawing of Phase-Change Material (PCM) or products contained in a variety of containers (bags, bottles or any size containers) such as single use system (SUS), polycarbonate vessels or polypropylene vessels. Temperature Range Programmable +40 ̊C to –80 ̊C Gbs7obps Chamber Volume 659.8 L (23.3 Cu. Ft.) Interior Dimensions (W x D x H) 34” x 27.5” x 43” 863.6 x 698.5 x 1092.2mm Exterior Dimensions (W x D x H) 75” x 38” x 80” 1901.5 x 960.4 x 2028.8mm Pull Down Empty Chamber < 38 minutes from +25 ̊C to –80 ̊C Door Open Recovery at –80 ̊C < 10 minutes 100L Load +25 ̊C to –80 ̊C < 12 Hours Unit comes with the complete documentation. Also the factory report. Kledpfxsv Rnl Dj Ap Aew The unit is unused and in its original packaging. Shipping worldwide in a wooden box. (#7709) No further warranty or guarantee.

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Kljdpfxoxukh Ee Ap Asw Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: AW016804, A-WARD UO20 CONTAINER TILTING SYSTEM, designed for the safe and efficient handling of 20-foot ISO containers in bulk material handling operations. Kledpjzbtu Ajfx Ap Aew The equipment allows for hydraulic tilting of the containers from 0° to 90°, facilitating the quick loading or unloading of bulk products such as scrap metal, minerals, grains, or other loose materials. • Type: container tilter with universal frame • Application: loading/unloading of 20-foot ISO containers • Tilting range: hydraulic tilting from 0° to 90° • Operation: self-contained hydraulic system with remote control • Status: available for sale • Condition: available for inspection The system improves safety, productivity, and loading efficiency by enabling controlled gravity-fed handling of bulk materials directly within the containers. Remarks: The unit is sold in its current condition. It is missing hydraulic hoses, and the weighing system is not operational.

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Kljdsyb Tucepfx Ap Aow Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: used, Year of construction: 2022, Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  - Capacity: Up to 150 bottles/min Kodpsxqpk Djfx Ap Aolw - Operation: Continuous from bulk hopper feed - Bottle types: Plastic (PET, HDPE, etc.) - Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) - Bottle orientation: Bottom-first via pneumatic flipping device - Machine direction: Left to right - Working height: 900 mm - Frame: Welded, stainless steel (AISI 304) - Sort drum diameter: 1,500 mm - Control system: B&R industrial computer with 12.5” touchscreen, integrated diagnostics, remote access - Electrical supply: 3 × 400 V, N, PE, 4 kW - Compressed air: 400 Nl/min at 6 bar - Machine guarding: Polycarbonate panels - Safety: Error detection with clear text display - Condition: As new (used for demonstration only) - Warranty: 12 months manufacturer warranty

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51N292010-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are suspended by injected air and consequently float downwards. The application areas include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with a motor. Nominal width: 1000 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, oscillation amplitude, inclination, speeds, etc. Design: dust-proof Control cabinet: in an IP 55 housing with a frequency converter for motors and fan, included as standard. Ksdpozkvaxefx Ap Aolw The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: new, Year of construction: 2022, functionality: fully functional, tank capacity: 700 l, usable tank capacity: 700 l, total length: 1,000 mm, total width: 1,200 mm, total height: 1,470 mm, overall weight: 187 kg, wall material: stainless steel, wall thickness: 1 mm, number of chambers: 1, manhole diameter: 400 mm, manhole location: top, We offer this new Thielmann KB5-GGU storage tank, silo, stainless steel silo. Kodpfxsy Aft Ue Ap Ajlw These are new, unused stainless steel bulk material silos. Liquid-tight Product data sheet available Manhole diameter: 400 mm Outlet diameter: 250 mm (DN 25) Minimum wall thickness: 1.5 mm Filling volume: 700 L Weight: 187 kg Stackable (load capacity 1710 kg) Completely made of stainless steel with a slide valve. Total: 350 units available If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: 32114, mileage: 71,900 km, power: 260 kW (353.50 HP), first registration: 10/2022, fuel type: diesel, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6e, suspension: air, loading space volume: 22 m³, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, differential lock, electronic stability program (ESP), power assisted steering, power mirror, tachograph, traction control, truck registration, Available from December 2026. The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Kodpszkt N Dofx Ap Aelw Weight variant 26 t, engine OM936, disc brakes, parking brake, front axle 8 t with leaf suspension, rear axles with air suspension, rear axle 13 t with differential lock, steerable and liftable 7.5 t trailing axle, regulated water pump, ABS, ASR, ESP, M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), 3 seats, driver's comfort suspension seat, passenger's comfort suspension seat, tinted windshield, sunroof, electrically heated and adjustable mirrors, electric windows, comfort locking system with central locking, axle load measuring device, multi-function steering wheel, multimedia radio with touch screen, trip computer, 12/24 V sockets in the passenger footwell, circuit breakers, pre-installation for toll collection system, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, sun visor, rotating beacon, Active Brake Assist 5, lane keeping assist, attention assist, turning assist, hill start assist, daytime running lights, rain sensor. Rear section side walls 5 mm, highly wear-resistant loading platform 8 mm, maintenance door, line break protection against sudden lowering of the rear section, camera system, CAN-BUS control, running boards with integrated weight sensor and time monitoring, warning signal when reversing, automatic lifting of the lifting platform when moving forward and backward, LED work lights, rotating beacons, central lubrication system BEKA-MAX, drain spigot (loading platform), bio drain front right, bio drain loading platform, rear monitoring system, 360 degree Backeye camera system Brigad, bulk material system Faun Skylift X.

Condition: used, Year of construction: 2018, operating hours: 4,717 h, functionality: fully functional, machine/vehicle number: 222319, total height: 6,500 mm, total length: 18,500 mm, total width: 12,500 mm, type of input current: three-phase, temperature: 250 °C, operating temperature: 250 °C, space requirement height: 6,500 mm, space requirement length: 19,000 mm, space requirement width: 12,500 mm, heating capacity: 30 kW (40.79 HP), year of last overhaul: 2023, Equipment: documentation/manual, emergency stop, lighting, We are selling our dipping conveyor system, which was installed in 2018 by Forplan AG. The system is fully functional and was used until 2022/2023 to overcome capacity bottlenecks, allowing for approximately single-shift operation. There are 4 sets of baskets (16 in total) for the system, with different wire diameters, making it suitable for smaller connecting elements, stamped, and bent parts that can be coated as bulk material. After prior arrangement, the system can be inspected at any time. Klodpfjzkt I Tex Ap Aow

Condition: used, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 09/2026, Equipment: ABS, Tipping silo semi-trailer for powders and granular materials, aluminum tank 45 m³, 4 manholes DN 450 with pivoting and folding dome covers, stainless steel discharge chute DN 800 that can be folded up and locked, and pivoted sideways, stainless steel slotted discharge system, shut-off valve DN 180, 24V tipping hydraulics, ABS, saddle height 1,100 mm - 1,200 mm, lightweight trailer, aluminum chassis, aluminum axle blocks, optimized tire rolling resistance – axles BPW type ECO 3 Airlight II, lift axle, aluminum rims Alcoa type Dura Bright, aluminum walkway, aluminum side impact protection, telematics components, weight-optimized WABCO braking system, aluminum box for hydraulic system, lifting and lowering valve for automatic height adjustment, weight-optimized underrun protection, color white. Kljdjza Ny Espfx Ap Aew

Condition: used, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 07/2026, Equipment: ABS, Tipping silo semi-trailer for powders and granular materials, aluminum tank 45 m³, 4 manholes DN 450 with pivoting and folding dome covers, stainless steel discharge chute DN 800 that can be folded up and locked, and pivoted sideways, stainless steel slotted discharge system, shut-off valve DN 180, 24V tipping hydraulics, ABS, saddle height 1,100 mm - 1,200 mm, lightweight trailer, aluminum chassis, aluminum axle blocks, optimized tire rolling resistance – axles BPW type ECO 3 Airlight II, lift axle, aluminum rims Alcoa type Dura Bright, aluminum walkway, aluminum side impact protection, telematics components, weight-optimized WABCO braking system, aluminum box for hydraulic system, lifting and lowering valve for automatic height adjustment, weight-optimized underrun protection, color white. Kjdpfxjza Nzio Ap Aslw

Condition: used, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 08/2026, Year of construction: 2023, Equipment: ABS, KIP 45.3 - Sugar, 202306, Used, ABS, 2023, Tipping silo semi-trailer for powdery and granular goods, aluminum tank 45 m³, 4 manholes DN 450 with pivoting and folding dome covers, stainless steel discharge chute DN 800, foldable upwards and lockable, and pivotable to the side, stainless steel slit breaker, shut-off valve DN 180, 24-V tipping hydraulics, ABS, fifth wheel height 1,100 mm - 1,200 mm, lightweight trailer, aluminum chassis, aluminum axle blocks, optimized tire rolling resistance – axles BPW type ECO 3 Airlight II, lift axle, aluminum rims Alcoa type Dura Bright, aluminum walkway, lateral impact protection aluminum, telematics components, weight-optimized WABCO braking system, aluminum box for hydraulic system, lifting and lowering valve for automatic height adjustment, weight-optimized underrun protection, color white. Klodpjza Nzcsfx Ap Ajw

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Kjdpfx Apjzkivto Aolw Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: used, axle configuration: 3 axles, first registration: 05/2001, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2001, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes Kjdpfezkgzmox Ap Aslw = Remarks = Superstructure Volume: 40 m3 Tank capacity: 40000 liters = More information = Tyre size: 385/65 Make axles: BPW Tyre profile: 30% Brakes: disc brakes Suspension: air suspension

Condition: used, axle configuration: 3 axles, first registration: 05/2001, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2001, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes = Remarks = Superstructure Volume: 40 m3 Tank capacity: 40000 liters = More information = Kedpfezkgzgsx Ap Ajlw Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Year of construction: 2019, condition: excellent (used), Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm Klsdsw Rnfuepfx Ap Aow -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg

Condition: used, functionality: fully functional, APS-10 Automatic tea bag packing machine fully functional equipment available. The equipment is designed for automatic packaging of bulk materials, for example black teas, fruit teas, etc. DEVICE CONSTRUCTION The main components of the sachet machine are: Unwinder for double packaging material Guide roller system Sample wheels for welding Cutting system Cross cutting system Bundling system (10, 20, 30, 50-100 each) Volume feeder Double belt conveyor PACKAGING MATERIAL Thermal sealing filter paper: 16g/m² Width: 490 mm Dimension max: 500 mm Core D: 76mm Kedpfx Ajyn Ibkop Aslw TECHNICAL AND OPERATIONAL DATA Overall dimensions (W x L x H): 1500mm x 1600mm x 2100 mm Tea bag size 48 x 65 mm Capacity: from 500 to 1000pcs/minute depending on the material. Working lanes: 10 rows Dosage: 1g to 2g Direct operation: one person. Sachet collection depending on the operating speed of the device: from 2 to 3 people Power supply: electric: 3 x 380V50Hz Electricity demand: 5kVA Pneumatic: 6 bar Air consumption: approx. 0.3m3/h

Condition: used, 🧰 Product Features • Material: High-quality polypropylene (PP) • Colour: Black • Volume: 20 litres • External dimensions: 400 × 300 × 215 mm • Internal dimensions: 360 × 260 × 211 mm • Load capacity: 40 kg • Temperature resistance: -20°C to +80°C • Weight: 1.07 kg • Stacking load: 150 kg • Container perfectly suited for euro dimensions • Stackable 💰 Price €9 net, excl. VAT • Bulk discount: On request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: Possible at any time by appointment Over 5000 linear metres of pallet racking from various manufacturers constantly in stock Kledpfjwz Rhhox Ap Aew (Technical data, specifications and prices subject to change and error. Intermediate sale reserved! See our T&Cs, all prices excl. VAT, ex stock.)

Year of construction: 2026, condition: new, We currently have a screening drum available in stock. The drum is coated with a black corrosion-resistant primer. This perforation is ideally suited for screening fine fractions, including: Compost Humus Soil Sawdust Biomass Wood chips Bark Fine bulk goods Sand Slag as well as shredded material. Kledpfxjzi Ak Ij Ap Ajw Technical data: Dimensions: Ø 3,000 × 6,525 mm Material thickness: 8 mm Races (inlet/outlet): 15 mm Perforation: QV 10–15 Material: S355J2+N The screening drum is available for immediate delivery from our warehouse.

Condition: used, machine/vehicle number: 318, empty load weight: 6,500 kg, maximum load weight: 27,500 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/1999, loading space volume: 60 m³, suspension: air, tire size: 385/65 r22,5, color: white, Equipment: ABS, Drum brake Wheelbase 1,330 mm Aluminum frame Kledpfxji E Nire Ap Asw BPW axles Alcoa aluminum rims Errors and omissions excepted.

Year of construction: 2023, condition: new, Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via Klodpfx Aokuz Tuop Ajw rotary vane probe - Inspection cover - Transport tube holder for the briquetting press - Viewing window in the container Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must ensure protection against hydraulic oil leakage - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.

Condition: used, first registration: 03/2026, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2026, TITLE: USED ROZZI 5-TINE GRAB FOR SCRAP AND BULK MATERIAL HANDLING WITH MECHANICAL ROTATOR REF.: 26-ATT-06 MODEL: RV130 WEIGHT: 145 kg CAPACITY: 130 l Subject to errors and/or omissions Kljdpfsyru Rmsx Ap Aow Displayed prices do not include VAT. Please contact our sales team for an updated comparison of prices and conditions. For more information: Loris: +39 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste sector. Specialists in trucks, trailers, and demountable equipment. A ready-to-deliver fleet with over 50 trucks and over 150 containers, skip bins, with and without demountable cranes. E.&O.E. Given the quantity of listings and details provided, Aurora advises verifying the accuracy of the information with the sales staff.

Condition: used, axle configuration: 3 axles, first registration: 05/2000, total length: 13,100 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2000, Equipment: ABS, = Additional Options and Accessories = - EBS - Hydraulic system - Aluminum alloy rims = Notes = Number of axles: 3, Tare weight: 6605 kg, Gross vehicle weight: 34000 kg, Chassis type: Full chassis, Chassis material: Aluminum, Kingpin size: 2 inch, Aluminum alloy rims, Suspension type: Air suspension, ABS, EBS, Hydraulic system, Body year of manufacture: 2000, Body material: Aluminum, Drum volume: 63, Drum volume in: m3, Compartment configuration: 1 compartment, Type of load: Silo, Axle type: BPW = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Kjdpfxjzgtuls Ap Aolw Weights Tare weight: 6,605 kg Payload: 27,395 kg GVWR: 34,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 09.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.