Used Bucket Elevator for sale (2,326)

Condition: new, Attachment suited for: Excavators Lodpox I Dlaofx Affeak

Condition: used, Year of construction: 2012, operating hours: 7,500 h, Serial number: CAT0324EKTLF0xxxx Please contact ATS Norway for more information Lsdpfsx Hdk Hsx Affeak Please provide reference number upon request: 22026 Specifications: 2012 model Hours: approximately 7,500 Certified Weight: 26,280 kg Belt width: 60 cm Machine width: 318 cm 151 kW GPS Grading bucket (new rib) Chassis (See pictures) Filter package replaced at 5,000 hours Nox switched Oil change AC/climate Ready for delivery   Description: 2012 CAT 324E excavator with Leica GPS and grading bucket. Owner has replaced filter pack at around 5000 hours. Oil change and Nox sensors have been replaced. Watch video. Ready for delivery Hours: 7500 Own weight: 26280 Kw: 151 Model: 324E

Year of construction: 2007, condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable Lodpfx Afob A I E Tofoak -Contents: 175 l -Width: 500 mm -Height: 550 mm -Depth: 1000 mm -Quick-change mount -Carrier device: Hekomat SKL08 -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 210 kg

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 3400-206, input voltage: 380 V, For sale: decommissioned dough bowl lifter and tipper. Lajdpfx Asx Iu Edeffok

Condition: used, functionality: fully functional, power: 28 kW (38.07 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 3,800 kg, operation weight: 3,800 kg, lifting power: 1,500 kg/m, lifting height: 2,700 mm, tire size: 11,5/80-15,3, axle configuration: 4x4, digging bucket width: 1,600 mm, Year of construction: 1994, operating hours: 4,340 h, machine/vehicle number: 4240120, Equipment: 4 in one shovel, additional headlights, all wheel drive, cabin, differential lock, pallet forks, A small yet powerful Liebherr wheel loader. The loader has an operating weight of approximately 3.8 tons, a dump height of approximately 2.30 meters, and a lift capacity of approximately 1500 kg on level ground. The small turning radius of the all-wheel-steered wheel loader allows it to work even on the tightest construction sites. Despite its older model year, the loader has only 4,300 hours on the clock and is in good used condition. The reliable Deutz diesel engine starts reliably even in colder temperatures. The engine and hydraulic pump have sufficient power and are dry. All bearings have very little play. TECHNICAL DATA: Ledpov Su Izjfx Affeak * Manufacturer: Liebherr * Type: L504 * Year of manufacture: 1994 * Operating hours: approx. 4,340 hours * Engine: Deutz diesel engine F3L1011 * Power: 28 kW (38 hp) at 2,500 rpm * Drive: hydrostatic all-wheel steering * Oscillating rear axle with a maximum tilt of 10 degrees * Brakes: hydrostatic / mechanical * Travel speed: continuously variable * 1st gear: 0-5 km/h * 2nd gear: 0-20 km/h * High and low gears * Turning radius with bucket: 3,580 mm * Kinematics: single parallel * Digging depth: 42 mm * Back/dump angle: 41 / 40 degrees * Ground clearance: 265 mm * Limited-slip differential: automatic * Lifting capacity: 32.5 kN * Breakout force: 24 kN * Tipping load: 2450 kg * Payload with fork (flat terrain): approx. 1500 kg * Dumping height at a 40-degree dumping angle: approx. 2.32 m * Max. height (bucket pivot point): approx. 2.90 m * Max. height (bucket top edge): approx. 3.64 m * Dumping range: 575 mm * Stacking height: approx. 2.70 m * Tires: Pneumatic tires * Front tires: 11.5/80-15.3 * Rear tires: 11.5/80-15.3 * Incl. pallet fork * Incl. 4-1 bucket * Incl. joystick lever with floating position * Incl. mechanical quick-change system * Incl. complete lighting system * Incl. heating/ventilation * Incl. front and rear window wipers * Incl. ROPS/FOPS cab * and much more * Maximum axle load (axle 1): 2500 kg * Maximum axle load (axle 2): 3000 kg * Maximum gross vehicle weight: 4000 kg * Total length (incl. bucket): approx. 4.45 m * Total width (incl. bucket): approx. 1.60 m * Total height: approx. 2.46 m * Dead weight: approx. 3800 kg * Serial No.: 4240120 You are welcome to inspect this and all other equipment by appointment, test it on-site, or take it for a test drive. If you have any questions about our machines, please feel free to contact us.

Condition: excellent (used), Year of construction: 2025, General information Field of application: Construction Weights Empty weight: 5.112 kg Functional Bucket capacity: 6,9 m³ CE mark: yes Condition Technical condition: very good Visual appearance: very good Laodexxzu Repfx Affek Other information Fits to following machines: CAT 988K Bucket type: Loader bucket Delivery terms: EXW Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Width: 40 cm Lasdex I Dkpspfx Affsk Attachment suited for: Construction machines Bucket volume: 0.15 m^3

Condition: used, Year of construction: 2018, operating hours: 4,180 h, CE mark: yes Serial number: wlhz1511hzc04xxxx Lajdpfx Aox E Nn Uoffsk Please contact ATS Norway for more information Please provide reference number upon request: 22017 Specifications 2018 model 4180 hours (will be a little) Weight: 18100 kg 90 kW Chassis (see pictures) Belt width: 70 cm Machine width: 270 cm Cut Sanding bucket Excavator bucket Rototilt w/ grab cassette Central lubrication Extra hydraulics Hammer hydraulics S70 attachment Track guides Air conditioning/ac Radio Extra light package Videos Ready for delivery Description: We have a 2018 Liebherr R914 k STD excavator w/ rototilt, sanding bucket and digging bucket for sale. Everything works as it should and the machine is in weekly operation so the number of hours will increase a little here. Sleek and versatile machine that gets the job done. Services have been taken on an ongoing basis. Ready for delivery Hours: 4180 Own weight: 18100 Kw: 90 CE: Yes Model: R914 K STD

Condition: good (used), Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable Laedpfx Aedpat Noffjk -Width: 420 mm -Height: 1010 mm -Depth: 1370 mm -Intermediate mounting dimension: 275 mm -Hole diameter: Ø 60 mm -Laceration teeth -The attachment to the spoon: can be changed by us for an additional charge. -Empty weight: 360 kg

Year of construction: 2017, condition: good (used), Weisshaupt Single-Column Freight Lift The Single-Column Lift: A Multitalented Solution The first stage of the modular system is the ESL, or "Single-Column Lift." The name says it all: the ESL is a lift system with one lifting column, along which a transport cage travels. The ESL has a standard load capacity of 500 kg. The standard transport cage has internal dimensions of 1000 mm x 1600 mm (external dimensions 1100 mm x 1700 mm) and offers space for a Euro pallet with a pallet jack. It features a flat floor (15 mm thick with a ramp on the loading side of the lowest floor), which allows for easy access and eliminates the need for a floor recess. The cage enclosure is 1100 mm high and made of robust welded wire mesh. The ESL is designed as a fully enclosed, self-propelled lift system as standard. Each floor has its own access doors and all necessary fixed enclosures made of machine guards. The access doors are integrated into the system and can only be opened when the conveyor cage is in front of them, thanks to an electric safety lock. Convincing advantages! ... Easy planning thanks to a modular system Space-saving and low-wear chain drive No special structural modifications required Approach ramp or shallow pit depth Stepless height adjustment up to 12 m All column lifts are designed for continuous operation (S1 motor) Electro-mechanical drive (geared motor + chain) No separate machine room required Very quiet operation No trained personnel required (unlike forklifts) Reduces downtime due to accidents and illness Low maintenance Suitable for outdoor installation Manufactured in accordance with Machinery Directive 2006/42/EC and DIN EN 81/31 for walk-in freight elevators, including all floor access doors and required machine guard enclosures. ... Locking device Duplex chain drive with 8-fold safety factor Electromechanical motor brake Chain tension sensor Electrically interlocked floor doors Optional active overload protection Upper emergency limit switch Thermal motor protection Maximum load capacity: 500 kg Lasdpfx Afex Ihpijfjk Lowering/lifting speed (standard): 4.2 m/min Connection specifications: 400 V (3PH+N+PE/50Hz) Control voltage: 24 V Starting mode: Soft start / soft stop Motor specifications: S1 motor (continuous operation) Year of manufacture: 2017 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2005, operating hours: 3,600 h, 2005 | JCB 535-140 with forks and loading bucket | Used Telescopic Forklift | 3600 hours 📍Location: France, Joué-lès-Tours 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 59 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The unit functioned during inspection recommended full service and filters 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40116 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Ledpfex El Rrex Affjak 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Field of application: Construction CE mark: yes Technical condition: good Visual appearance: good Laedpfx Aex A Hkrsffek Fits to following machines: CW 45 Compatible Excavators Bucket type: Excavator bucket Delivery terms: EXW Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, Year of construction: 2024, Excavator bucket Lodpfxox I Dkie Affoak    • Working width: 2000 mm    • CW 2/3 mounting    • Perforated plate with 10 mm round holes    • Also available with CW05, CW10, or Herder coupling Condition: New Year of manufacture: 2024

Condition: used, Year of construction: 2023, operating hours: 3,050 h, CE mark: yes Serial number: CAT0M315EKE52xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21842 Specifications : Certified 2023 model Hours: approx. 3050 110 kW Weight: approximately 18,000 kg Tires (see pictures) CAT C4.4 engine TRS14 Tiltrotor SMP Sanding Bucket Cut Central lubrication LED bar Camera at the back and on both sides. Trailer hitch Rotor beam Radio/CD Air conditioning/ac Laedpfxox Evrge Affsk Description : CAT M315 Wheel excavator from 2023 with 3050 hours. The excavator is certified and ready to be put into operation. It comes with TRS14 rotor tilt and SMP sanding tray. Gigant GD3-10X trailer can be included for an additional price. Can be delivered within a short time. Hours: 3050 Own weight: 17070 Year controlled: Yes Kw: 110 CE: Yes Engine hours: 3050 Model: M315 hjulgraver m/ tilt og skuffe

Year of construction: 2016, condition: ready for operation (used), A Wiese pendulum bucket elevator in Z-shape for gentle vertical and horizontal conveying of sensitive, light bulk materials (potato chips) is available. Particle size range: 50mm-60mm, max. conveying material temperature: 30°C, moisture: dry, bulk density: 0.07t/m³, conveying capacity: approx. 14.3m³/h, belt speed: 0.22m/s, max. bucket filling: 60%, belt material: EPDM, bucket width: 476mm, support roller diameter: 95mm. Lower edge discharge: 4960mm, feed vertical shaft center: 3490mm, vertical shaft center last discharge: 1675mm. Documentation available. An on-site inspection is possible. Ledsx H S N Djpfx Affeak

Condition: excellent (used), Year of construction: 2019, For sale: 14 Kardex Megamat RS 350 vertical carousels in excellent condition. These machines have been meticulously maintained with annual servicing and have been used exclusively in a clean and light-duty environment. They are available for individual purchase or in packages of 2, 4, 6, 8, or all 14 units. The collection includes 6 units manufactured in 2018 and 8 units from 2019, offered in two height options: 6,585 mm and 7,110 mm. Each vertical carousel is configured with either 21 or 23 carriers, providing between 42 and 49 shelves per unit. A detailed description of the shelf configurations can be provided upon request. All units feature the optional "Matrix Strip," an LED guidance system installed at the access point. This system highlights the picking location laterally and displays product information, though ERP or WMS integration is required to fully utilize its capabilities. Please note that the boxes shown in images are not included. Lodjvgdkbspfx Affoak Specifications: Manufacturer: Kardex Remstar Model: MEG RS 350.1.3050.6.533.21 / MEG RS 350.1.3050.6.533.23 Manufacturing Year: 6 units from 2018, 8 units from 2019 Height (Vertical Carousel / Carrier): 6,585 mm & 7,110 mm with a free storage height of approximately 470 mm Width (Vertical Carousel / Carrier): 3,675 mm / 3,050 mm Depth (Vertical Carousel / Carrier): 1,671 mm / 628 mm Number of Carriers / Shelves: 21 or 23 carriers with 42-49 shelves Maximum Weight per tray: 228-350 kg, depending on the number of shelves installed Electronics: 3/N/PE 400V For further details or inquiries, please don't hesitate to get in touch.

Condition: good (used), Year of construction: 2022, General information Lsdpfsx A Hkxox Affsak Field of application: Construction Serial number: 3046522 Weights Empty weight: 1.520 kg Functional Bucket capacity: 3,1 m³ Condition Technical condition: good Visual appearance: good Other information Fits to following machines: Volvo L90H Bucket type: Loader bucket Delivery terms: EXW Production country: DK Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Attachment suited for: Excavators Laodpfox I Di Sjx Affsk

Condition: new, Year of construction: 2025, General information Field of application: Construction Weights Empty weight: 2.385 kg Functional Bucket capacity: 2,2 m³ CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: CW 45 - CAT 505-4113 Bucket type: Excavator bucket Ledpfxexxzuwe Affsak Delivery terms: EXW Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Banana bucket   • CW10 coupling   • Working width: 400 mm   • Capacity: 150 liters   • Suitable for excavators between 6 and 8 tons Condition: Used Lajdpfx Afox I Di Ejfsk

Condition: new, Year of construction: 2025, General information Laedpfoxxzuqox Affsk Field of application: Construction Weights Empty weight: 4.680 kg Functional Bucket capacity: 4,5 m³ CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: CW70 - CAT 368-3783 Bucket type: Excavator bucket Delivery terms: EXW Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, Year of construction: 2020, Attachment suited for: Construction machines Ljdpsx I Dilsfx Affoak

Condition: new, Year of construction: 2025, General information Field of application: Construction Weights Empty weight: 2.980 kg Lsdexxzu Dspfx Affsak Functional Bucket capacity: 3,2 m³ CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: CW 55 - CAT 597 - 6033 Bucket type: Excavator bucket Delivery terms: EXW Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Attachment suited for: Excavators Lajdpfx Aex I Df Tsffok

Condition: used, Width: 50 cm Attachment suited for: Excavators Lodpfx Aox I A Tieffsak