Used Brown for sale (97)

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Fedpfjzfh U Djx Ad Iopi Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: used, Used LED industrial light from Planistar Lichttechnik GmbH. Robust industrial housing with integrated LED technology and reflector insert. Ideal for industrial lighting applications. Manufacturer: Planistar Lichttechnik GmbH Model: 10-10-Xled-3-KX-46W-POL-Daimler Device Type: LED industrial light Condition: used Available quantity: 16 units Light color: White Supply voltage: 24 V DC Power consumption: 46 W Operating mode: Continuous light or flashing mode Current consumption (continuous light): 1 A Fjdpfx Adezdngqo Iepi Current consumption (flashing mode): 1.5 A Protection rating: IP40 Pin assignment: Pin 1 Brown: 24 V DC Pin 3 Blue: GND Pin 4 Black: Signal 5–24 V DC (continuous light) Pin 2 White: Signal 5–24 V DC (flashing mode) Manufacturer part number: 20192171 Quantity: 16 units available

Condition: good (used), functionality: fully functional, Production line for sealed block-bottom bags The machine can also be used as a standard block-bottom machine for paper. The necessary parts are available. The sealing unit can also be used offline without a bridge. Pre-printed bottom sheet Self-adhesive bottom sheet In-line coding printer Material: Paper and composites Format: Bag width: 140 mm - 320 mm Bag length: 240 – 900 mm Bottom width: 70 – 180 mm With servo drive - Block-bottom standard materials: Uncoated paper: 70 g/m² and 100 g/m² Coated paper: 80g Plastic films (LDPE): 40 µ, 70 µ and 100 µ PE-coated paper: Pa 60 g/m² + LDPE 40 g/m² Airsickness bags: Pa 65 g/m² + LDPE 23 g/m² Paper-aluminum-PE composite: Alu 8/25 and Alu 8/50 PET/Alu/PE composite: PET 12 µ / Alu 8 or 9 µ / LDPE 90 µ - Possible materials Outer layer Coated paper 60–120 g/m² Over 100 g/m² only in large format Inner layer LDPE mono-film 0.03–0.10 mm (optionally needled) Alternatives: LDPE 0.08–0.12 mm OPP 20–40 µ PE-coated paper (various combinations) Aluminum foil on carrier paper with PE coating Construction from outside to inside 30 g/m² bleached kraft paper 12 g/m² PE Fjdpfxezgwnio Ad Iepi 0.008 mm aluminum foil 25 or 50 g/m² PE Intermediate layer (only with material 21) Alternative: Bleached kraft paper 80–100 g/m² Brown kraft paper 80–100 g/m² LDPE 80–100 µ

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely No problems with the air bearings Fsdpfxsy Taixo Ad Ispi Machine has been regularly serviced Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PI2E310140HB2M, Equipment: air conditioning, centrifugal blower fan (backward-curved impeller) with an EC motor. These are commonly used in: HVAC ventilation systems Heat recovery units (MVHR) Air handling units Commercial extraction systems Fan coil units and air purifiers The label shows: Manufacturer: PSCME Model: PI2E310140HB2M 230V AC, 50/60 Hz 390 W 1190 RPM Fpodpfx Adjzf Ibqs Isi It also has 10 VDC / PWM speed control inputs, which means its speed can be electronically controlled. The wheel shape with the curved blades is designed to move a large volume of air efficiently and quietly. In simple terms, it's essentially the motor and fan assembly from a ventilation or air-conditioning system. If you found it separately and want to know: What machine it came from Its approximate value How to test it How to wire it up I can help with that too. A clear close-up of the entire label and any stickers or markings would help identify the exact application. Based on the label in your photos, I can identify it more precisely. Model Details Manufacturer: PSCME Model: PI2E310140HB2M Type: EC centrifugal blower fan Voltage: 230V AC, 50/60 Hz Power: 390W Speed: 1190 RPM Control: 0–10V DC or PWM speed control What is it used for? This type of fan is usually found in: Heat recovery ventilation systems (MVHR) Air handling units (AHUs) Commercial ventilation systems Kitchen extract systems Industrial air circulation equipment The 310 in the model number suggests a wheel diameter of around 310 mm. Approximate Value Used value depends on condition: Untested: £30–£80 Tested and working: £80–£200 New equivalent: £250–£500+ Wiring According to the label: AC Supply Brown = Live Blue = Neutral Green/Yellow = Earth Speed Control Red = 10 VDC output Blue = Ground Yellow = 0–10 VDC / PWM control input White = FG (tachometer/fan speed signal) ⚠️ Since this runs on mains voltage (230V), it should only be wired and tested if you're comfortable working safely with mains electricity. What machine did it come from? The fan itself is generic and could have been fitted by manufacturers such as: Vent-Axia Nuaire Systemair FläktGroup S&P (Soler & Palau) Airflow Various Chinese OEM ventilation units If you have all 10 photos, please upload them (or especially any photos showing labels, stickers, or the complete unit it came from). I may be able to identify the exact machine and tell you its likely resale value more accurately.

Condition: new, Folding carton / folding box stable Color: brown 2-flute 590x460x1397 mm Carrying straps Quantity: 1 x pallet with 140 pieces Fsdou Dmzbepfx Ad Ispi You can find more cardboard boxes - in other sizes - in our store! International shipping costs on request!

Condition: used, blade length oben 211/unten 180 mm plate thickness max. 6 mm round bar steel max. 13 mm weight ca. 19 kg Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm. With compound action. Cuts sheet metals and round steel bar. Colour: Red-brown Fjdpfx Adjxbtrms Ispi

Condition: good (used), 399 USED bakery crates 40x80x15.5 cm brown. We have: 46 units. Price is per set: 46. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Fpjdpfxszdqy Hj Ad Iji Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, mileage: 25,000 km, power: 44 kW (59.82 HP), first registration: 07/1956, fuel type: gasoline, gearing type: mechanical, PORSCHE 356 A Speedster CABRIOLET The vehicle was delivered to Max Hofmann in New York in 1956. Vehicle number: 82816 CREAM BROWN Owned by the previous owner in Germany for 25 years. German registration. Stainless steel exhaust system. Solex carburetor. Wooden steering wheel. Fsdpfozdl Hbox Ad Ispi Brown soft top. Pop-out windows. Chrome rims.

Condition: good (used), Technical data for the pallet racking system: Racking system: Alser Type: NS Technical data for installation: Number of racking rows: 01 pc Length per racking row: approx. 11,720 mm Number of bays per row: 06 pcs at 1,860 mm each Number of levels plus ground level: 03 pcs Technical data on capacity: Pallet spaces per bay: 06 pcs Number of pallet spaces per row: 48 pcs Total number of pallet spaces: 48 pcs Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Fodoydpdrepfx Ad Iopi Total height including pallet: n/a Max. weight per pallet: approx. 1,000 kg Included in scope of delivery: 07x pallet racking frames, used Colour: brown Profile section: C80 x 40 x 15 x 2.00 mm Including horizontal and diagonal braces, base plates The frames are pre-assembled Max. bay load: 4,000 kg at buckling height: 1,250 mm (min. 5 bays per row) (welded truss design) 4,900 mm high, 1,050 mm deep 36x pallet racking beams, used Colour: orange Profile section: S 110 x 55 mm Beam type: B113 Connector: 2 HK Clear span: 1,860 mm Max. load per pair of beams: 1,500 kg with evenly distributed load 72x locking pins, used Finish: sendzimir galvanized For securing the beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Finish: carbon steel, galvanized Approved for: cracked concrete 14x shims, used Material: sendzimir galvanized For leveling racking frames installed on uneven surfaces 01x load capacity sign Indicating bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered exclusively for collection. Any additional transport or shipping of this item is subject to additional costs, which can be quoted according to delivery location and scope upon request.

Condition: used, clear span: 1,860 mm, total width: 11,720 mm, total height: 2,500 mm, Technical Data for Pallet Racking System: Racking System: Alser Type: NS Setup Specifications: Number of rack rows: 01 pcs Length per rack row: approx. 11,720 mm Number of bays per rack row: 06 pcs of 1,860 mm each Number of levels plus ground level: 02 pcs Volume Specifications: Pallet locations per bay: 06 pcs Pallet locations per row: 36 pcs Total pallet locations: 36 pcs Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: approx. 1,000 kg Scope of delivery includes: 07x pallet racking uprights, used Material color: brown Profile dimension: C80 x 40 x 15 x 2.00 mm Including horizontal and diagonal braces, base plates Uprights are pre-assembled Max. bay load: 4,000 kg At buckle height: 1,250 mm (min. 5 bays per row) (welded truss) 2,500 mm high 1,050 mm deep 24x pallet racking beams, used Material color: orange Profile dimension: S 110 x 55 mm Beam type: B113 Connector: 2 HK Clear width: 1,860 mm Max. load per pair of beams: 2,000 kg, with evenly distributed load 48x safety pins, used Material finish: sendzimir galvanized For securing longitudinal beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Fpodpfx Adsx Upqbs Iji Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Material: sendzimir galvanized To level uprights set up on uneven ground 01x load plate with information on bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General Information about the Item: This item is offered for collection only. Any transportation or shipping of this item is subject to additional costs, which can be provided upon request depending on the delivery location and order volume.

Condition: good (used), The scope of delivery includes: 02x Shelf uprights, used Material color: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Shelf crossbeams, used Material color: orange Beam profile: 120 x 50 mm Clear span: 2,700 mm 08x Locking pins, used Design: fully galvanized 03x Wire mesh grating, new Material color: Sendzimir galvanized Design: laid-on shelf grating, beveled on both sides Depth: (direction of supporting bar) approx. 1,125 mm for upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Crossbeam support: approx. 65 mm Mesh size: approx. 95 x 45 mm Wire thickness: approx. 4.5 mm Maximum load capacity: up to 800 kg with evenly distributed load 03x Trapezoidal sheet metal, 2nd choice Exterior color: RAL 8012 reddish brown Interior color: similar grey-white Sheet length: 1,500 mm Sheet width: 1,075 mm Cover width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material color: RAL 8012 reddish brown Size: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm with 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws, 4.8 x 20 mm galvanized, self-tapping for wooden substructure Technical data for the firewood storage: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images are example images Fpjdpfxjdvgxij Ad Iji to illustrate the construction. The material color of the shown uprights and crossbeams may differ. General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Lincoln 1100 Series Impinger II Range Fedezcbz Hspfx Ad Ispi Natural gas powered Gas power 42.2 MJ per deck Power supply 230 V / 1 phase / 50 Hz / 2 A Natural gas pressure 7-12" WC Minimum gas pipe size 1½" / 38 mm Flexible gas connector (option) Output 25 pizzas 12"/h at 6.5 min Cooking chamber 711 mm Temperature 121 °C to 302 °C Cooking time 1 to 30 min Conveyor 457 mm wide Belt 1422 mm with product stop Conveyor opening 76.2 mm Removable conveyor from the front Digital microprocessor controls Lockable settings Stainless steel top, front, and sides Stackable up to 3 chambers Rear clearance 152 mm Right clearance 610 mm Ventilation required for gas models FastBake Technology (option) Infeed/outfeed shelves (option) Split Belt 50/50 (option) Dimensions 1422 × 991 × 1128 mm Lincoln 1154 natural gas conveyor oven – controlled continuous cooking for pizzeria and catering businesses The Lincoln 1154-F00-E-KF006 belongs to the 1100 Series Impinger II range, a professional conveyor oven designed for continuous cooking in the food service industry. It is intended for pizzerias, snack bars, restaurant chains, high-volume establishments, and commercial kitchens that require consistent cooking with a conveyor belt rather than traditional batch cooking. Its impingement air technology heats, cooks, browns, and crisps products with efficient air circulation in a 711 mm cooking chamber. Why this model stands out This 1154 model operates on natural gas with a 230 V, 1-phase, 50 Hz, 2 A electrical power supply. It combines a 457 mm wide belt, an adjustable cooking time of 1 to 30 minutes, and a temperature range of 121 °C to 302 °C. For a professional, the benefit is clear: standardize the results, streamline service, and reduce repetitive tasks during peak periods.

Condition: used, mileage: 23,300 km, power: 44 kW (59.82 HP), first registration: 07/1960, fuel type: gasoline, color: red, driver cabin: other, gearing type: mechanical, Year of construction: 1960, Vehicle location: Bovenden, Doka, work lights, rotating beacon, leaf suspension Superstructure: LF 8/TS fire-fighting vehicle incl. Bachert portable pump If you have any questions, please call ! Color: red Synthetic leather: dark red / brown 2nd hand H license plate possible Original German cardboard letter, operating instructions, service certificates, internal certificate and history folder are available. Fpedpfxsvhh E Ss Ad Iji The vehicle was extensively restored for over €50,000.00! 4x4, body Carl Metz GmbH Karlsruhe according to DIN 14530, incl. various accessories such as 1 fire pump, nominal flow rate 800l/min, nominal delivery head 80m, water column speed nominal power 2,800rpm, transmission ratio 1:1, incl. various accessories on hoses, pumps, trailer coupling test mark, M787 license plate OG LC 971H, various hose distributors, jet pipes, water jet pump. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), For sale: Industrial electric motor from the renowned manufacturer BBC (Brown Boveri). Robust, heavy-duty motor designed for continuous operation under demanding industrial conditions. Classic BBC construction—very durable and reliable. The unit is in good technical condition and fully operational. Normal signs of use are visible. Technical data: Manufacturer: BBC (Brown Boveri) Model: GU180 M4AG Power: 18.5 kW Supply voltage: 3~ 380/660 V Speed: 1460 rpm Frequency: 50 Hz Protection class: IP54 Insulation class: B cos φ: approx. 0.85 Fedpfsyvi Ngsx Ad Iepi Mounting: IM B3 (foot-mounted) Condition: Used Fully functional Normal signs of use Good overall condition

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: Multiple on request, Continuous Potato Peeling Line – Tong Engineering & Sormac Equipment This continuous potato peeling line combines reliable Tong Engineering handling equipment with efficient Sormac peelers to create a complete solution for high capacity potato processing. Designed for consistent product flow and dependable performance, the system is well suited to processors looking to streamline their peeling operation. The equipment moves potatoes smoothly from cleaning and peeling through inspection, treatment, and final product safety checks. With trusted machinery from Tong and Sormac, this line delivers both efficiency and durability in demanding production environments. Equipment Included Tong Engineering De-Stoner The process begins with a Tong de-stoner, which removes stones, soil, and heavy debris from incoming potatoes. This stage protects downstream equipment and ensures cleaner product enters the peeling process. Two Sormac Continuous Peelers The line includes two Sormac continuous peelers designed for high capacity peeling while minimising product loss. These machines efficiently remove potato skins while maintaining consistent throughput for industrial potato processing operations. Tong Engineering Surge Tank A Tong surge tank regulates product flow between processing stages. This buffer helps maintain a steady supply of potatoes through the system and prevents bottlenecks during production. Tong Roller Inspection Table The Tong roller inspection table allows operators to visually inspect peeled potatoes and remove defects. Rotating rollers spread the product evenly, improving visibility and making quality control easier. Tong Dip Tank with Dosing Unit A Tong dip tank with integrated dosing unit allows potatoes to be treated with anti-browning or preservation solutions. This step helps maintain product appearance and supports shelf life after peeling. Loma IQ3S Metal Detector The final stage of the continuous potato peeling line is a Loma IQ3S metal detector, which checks the finished product for metal contamination and helps meet food safety standards. Key Benefits Complete continuous potato peeling line for commercial processing Combination of Tong Engineering handling equipment and Sormac peelers Designed for efficient stone removal, peeling, inspection, and treatment High throughput suitable for industrial potato processing Integrated metal detection for product safety Reliable equipment built for demanding production environments Suitable Applications This equipment is ideal for: Potato processing facilities Fresh produce packing operations Ready meal manufacturers Vegetable processing plants Enquiries If you are interested in this continuous potato peeling line, please get in touch for further information, pricing, and availability. The system offers a dependable solution for large-scale potato processing. Five individual lines available Fpedpfxsytn H Dj Ad Iei We hold a wide range of new and used food processing machinery in stock, some of which may not be showing on our website. If you have any additional requirements please get in touch

Condition: used, mileage: 148,000 km, power: 294 kW (399.73 HP), fuel type: gasoline, gearing type: automatic, first registration: 05/2016, emission class: euro6, color: silver, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, This well-maintained Porsche Macan boasts an elegant silver metallic exterior with a brown leather interior. The powerful 3.6-liter six-cylinder engine with 400 hp delivers impressive performance, while the automatic transmission ensures comfortable driving. All-wheel drive guarantees optimal traction under all conditions. First registered in 2016, this Macan has a complete service history, exclusively performed at Porsche dealerships, and has had only two previous owners. The extensive features include a panoramic glass sunroof, electric tailgate, and a sports package for a dynamic driving experience. The three-zone automatic climate control, heated leather seats with memory function, and navigation system provide maximum comfort. State-of-the-art safety systems such as lane-keeping assist, blind-spot monitoring, and adaptive cruise control complete the package. Turbo Carbon package, carbon fiber steering wheel with heating, Alcantara roof, sports exhaust system, Bose sound system, air suspension. * Euro 6 emissions standard with a green environmental badge * Bi-Xenon headlights with cornering light function and high-beam assist * Keyless entry and electrically folding exterior mirrors * Dynamic chassis control and performance handling system * High-quality sound system with DAB radio and Bluetooth connectivity * Front and rear parking sensors for effortless parking * Digital cockpit with touchscreen and voice control * Winter and summer tires included * Towing capacity (braked): 2,400 kg * Non-smoker vehicle with brown leather interior Fsdsx Hmlmopfx Ad Ijpi * Complete service record, exclusively at Porsche dealerships. Accident-free, no repainting. German vehicle. Special equipment: Sports exhaust system, storage package, instrument cluster with colored background, exterior mirror sports design, driving assistance system: parking assistant, driving assistance system: lane change assistant, driving assistance system: speed limit display, front apron stainless steel, floor mats, vehicle without model designation, interior package: carbon, comfort seats in front incl. 14-way seat adjustment and memory package, headrests in front with Porsche crest, steering wheel (carbon 3-spokes) with multifunction, light comfort package, metallic paint, panoramic sunroof two-piece electric in front, wheel hub covers Porsche crest colored, power steering Plus (speed-dependent), seat heating in front, roller sun protection on rear side windows, Bose surround system, Alcantara roof liner Further equipment: 3rd brake light, airbag on passenger side can be switched off, airbag driver/passenger side, trailer stabilization program, trailer coupling preparation, anti-slip control (ASR), drive type: all-wheel drive, automatic brake differential (ABD), exterior mirror aspherical, left, exterior mirror electric. folding, exterior mirror electric. adjustable and heated, exterior mirror with curb automatic, Bi-Xenon headlights incl. Porsche Dynamic Light System (PDLS), on-board computer, brake calipers painted red, roof liner Alcantara, roof spoiler black high-gloss, automatic activation of driving light, door sill trims (aluminum), driving assistance system: multi-collision brake (Multi Collision Brake), power windows electric front + rear, window frame strips aluminum, windshield with band filter at the top, cup holder, rear diffuser painted, tailgate with automatic opening and closing system, rear lights LED, rear center section painted, rear window heated, interior filter: activate

Condition: used, Year of construction: 2005, functionality: fully functional, conveyor belt length: 4,560 mm, conveyor belt width: 800 mm, conveyor belt speed: 370 mm/s, total length: 4,560 mm, total width: 917 mm, total height: 270 mm, power: 0.37 kW (0.50 HP), motor manufacturer: Brown Pestell, TAF item number: 1000004836 Manufacturer: FRASCH Year of manufacture: 2005 Overall dimensions (LxWxH): 4,560 x 917 x 270 Width including side plate in mm: 875 Fodpfxewk H Amo Ad Ispi Width incl. drive in mm: 917 Side height in mm: 80 Conveyor length in mm: 4,560 Conveyor width in mm: 800 Belt type: PVC, smooth Belt width in mm: 800 Sliding surface: Sheet metal Drive: Head drive Motor type: Gear motor Motor data: Brown Pestell, 0.37 KW, 50 Hz, 220-380 / 240-415V Conveyor speed in m/s: 0.37 Net weight in kg: 157 Condition: Used / fully functional Function test: OK

Condition: used, 🧰 Product Features • Material: Premium-quality polypropylene (PP) • Colour: orange, brown • Volume: 0.8 litres • External dimensions: 160 × 103 × 75 mm • Internal dimensions: 139 × 87 × 68 mm • Payload: 2 kg Fpsdpfx Adewz U Uxo Ioi • Temperature resistance: -20°C to +80°C • Weight: 0.09 kg • Base & walls: closed 💰 Price €2,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock (Technical data, specifications and prices are subject to change and errors; interim sale reserved! See our terms and conditions. All prices excl. VAT, ex-stock.)

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) Fpedpfx Adoy U Auyo Isi • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: Fsdpfx Adjy U Auts Iopi • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 1,000 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: air conditioning, lighting, The containers pictured are in stock and available for immediate delivery. Inspection and collection are possible. In this offer, we present Villex Wood Pavilion Containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or site containers. Dimensions: 6.0 x 2.4 x 2.6 m Delivery: possible nationwide Standard Features: Condition: New & Assembled External color: Black + brown (as shown in the photos) External walls: 50 mm thick Area: 14.40 m² Weight: 1,200 kg 1x entrance door 2x windows -> single sash, fixed glazing, tilt function included Electrical installation: 6x power outlets, circuit breaker + fuse, surface-mounted wiring (PVC) We manufacture your container individually according to your requirements! Optional extras at additional cost: Custom dimensions, e.g. 7x3m, 4x2.4m, double containers, triple units, etc. Different window sizes Different colors Floor colors Practical forklift pockets Air conditioning Lamp Roller shutters Heating WC, shower, toilet, washbasin Kitchen Plastered interior walls Fodjy Egqgepfx Ad Ijpi And much more Delivery is generally carried out with our own vehicles. Payment is possible in cash upon delivery (to our driver), or conveniently in advance via PayPal or bank transfer. The nationwide delivery time for standard containers in stock is approximately 1–2 weeks after order, depending on postal code region. Custom containers are produced and delivered within 1–4 weeks.

Year of construction: 2026, condition: new, functionality: fully functional, SPECIAL PRICE + LIMITED QUANTITY iCOMBI PRO 10x 1/1E NEW IN ORIGINAL PACKAGING + 1 YEAR MANUFACTURER WARRANTY + 2 YEARS IF INSTALLED BY RATIONAL SERVICE PARTNER The iCombi Pro is the latest combi-steamer from RATIONAL. The iCombi Pro 10.1/1 Electric model with 10 GN 1/1 shelves is easy to operate, even for untrained staff, delivering outstanding food quality without the need for constant supervision. The ultra-fast interim and self-cleaning features keep your unit spotless. You will receive an invoice with VAT shown separately. In-stock and available immediately!!! OUR EQUIPMENT SERVICE FOR YOU: - Up to 2 years manufacturer’s warranty - High-quality branded equipment at fair prices - Professional and knowledgeable advice – before and after purchase - Free shipping within Germany (excluding islands/mountain stations) - Provision of operating manuals, connection diagrams & spare parts - Trade-in of your combi-steamer from year of manufacture 2011 onwards - Complete accessory program at attractive prices Condition: New, fully functional, year of manufacture 2026 TECHNICAL DATA: W x D x H: 850 x 842 x 1014 mm Power supply: V: 400 / Hz: 50-60 / kW: 18.9 Weight: 127 kg FEATURES: - Energy efficient: Up to 60% less energy consumption thanks to state-of-the-art thermal insulation - Self-cleaning; the unit cleans itself via an integrated program - Operation possible without additional water softening system and without extra descaling Fpodpswwiu Ejfx Ad Ioi ADDITIONAL INFORMATION: - Temperature range: 30°C to 300°C - Detects current cooking chamber conditions - Recognizes food size, load quantity and product state to calculate browning - Learns frequently used cooking routines and implements them - Determines the ideal cooking process for your desired result - MyDisplay – user-specific, customizable control display - TFT color display and touchscreen - Operating and user manuals accessible on the device display - Core temperature probe with automatic error correction and positioning aid - Door compartment glazed, energy-saving - LED interior lighting - Including energy consumption display - Humidity control: precise, percentage humidity measurement and adjustment - Individual programming of at least 350 cooking programs with up to 12 steps - Steam injection adjustable in 3 stages - USB interface - High-performance fresh steam generator with automatic descaling - 5 programmable air speeds - Integrated, maintenance-free grease separation system without additional grease filter - Cool-down function: rapid cooking chamber cooling - Automatic adaptation to installation location (altitude, climate, etc.) - Appliance door with ventilated triple glazed panel and swiveling inner pane - Wastewater fixed connection permitted as per SVGW - Splash and jet water protection IP X 5 - Separate solenoid valves for soft and warm water up to +30°C - Automatic start time pre-selection with adjustable date and time - Interior and exterior made from stainless steel DIN 1.4301 - Integrated WiFi module SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations by prior agreement only Do you have questions, need advice, or wish to view the unit in person? You can reach us during our business hours: Monday–Friday, 09:00–13:00 and 14:00–17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Used vibratory finishing machine from PERS, model Vibra-Line B 150 l with buffer tank, combined with PERS dryer Vibra-Dry A 200 l — both are demonstration machines — mounted on a platform. Technical data / Vibra-Line B 150 l: - U-shaped process chamber with automatic discharge - Capacity (gross): 150 l - Usable volume (depending on workpiece geometry and material): 80 l - Year of manufacture: 2024 - Outer diameter: 1,170 mm - Height: 860 mm - Chamber lining: 22 mm, yellow or brown PU - Total weight (empty): 320 kg - Drive power: 2.2 kW - Electrical connection: 3 x 400 V, 16 Amp. CEE plug - Machine color: RAL 7015/7035 - Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) independently flows through the filter basket into the buffer tank, from where a submersible pump feeds the solution back to the circular vibrator. - Buffer tank dimensions (LxWxH): 700 x 400 x 460 mm - Supplied with 1 submersible pump and 1 filter basket (630 µm) Technical data / Vibra-Dry A 200 l: - Corn/grain dryer with automatic discharge — vibratory dryer - Year of manufacture: 2024 - Volume: 220 l - Motor power: 1.5 kW - Heating: 3 kW per element (PTI temperature control) - Workpiece capacity: up to 65 kg - Corn capacity: 25–35 kg - Speed: 1,400 rpm - Heating output: 6 x 1.5 kW - Length: 1,141 mm - Width: 1,200 mm - Height: 905 mm - Internal bowl dimensions: 240 mm - Electrical connection: 3 x 400 V, 16 Amp. CEE plug - Machine color: RAL 7015/7035 - Corn granulate temperature: +30 to +50°C - Digital temperature control Fpjdpsy A N U Asfx Ad Ioi - Pneumatically controlled discharge valve - For commissioning, use 25 kg of corn type GM 16 or GM 20

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on Fsdpfxewtb Rqj Ad Iepi