Used Brian Beckum Inert Gas Welding Machine for sale (68,125)

Condition: good (used), Welding current: 10 - 200 A Weight: 103 kg Siegfried Volz Machine Tools Dwjdpsyrglcefx Alfsd Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible. Dwodpszxr N Ssfx Alfed

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar Dwodpfxozfim Ij Alfed - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: used, Year of construction: 2015, Offer 26163 Technical data (approximate): - Maximum workpiece diameter: 80 mm - Overhang: 70 mm - Welding torch stand adjustable in X, Y, and Z - Stand travel via handwheel: 500 mm - Stand overhang: 70 mm - Distance between centers: 600 mm - Tailstock with pneumatic pressure spindle - 3-jaw chuck: 100 mm - Hand-held remote control - Connection cable - Pneumatic connection Dwodpfx Ajzg A Rijlfed - Table frame: W 2000 x H 850 x D 700 mm - Footprint (approximate): W 1150 x H 650 x D 500 mm - Weight (approximate): 200 kg

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition Djdst Awm Dspfx Alfewd - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column Dwedoxzb E Iopfx Alfed -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc.

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year nominal power at 50% ED: 45 kVA Dwjdpfx Alozudivofsd rated apparent power: 45 kVA no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Pneumatically operated, parallel-guided spot welding machine Brand: DALEX Type: PMS 10-4 Throat Depth: 550 mm with double-stroke cylinder and approach stroke Rated power at 50% duty cycle: 50 kVA Secondary short-circuit current: 24 kA Dedpsyh Hlxjfx Alfjwd Secondary open-circuit voltage: 5 V Electrode force: 65-390 daN Weight: 425 kg with mounted control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Sample photo Machine is currently being refurbished.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide. Djdez D Hyyopfx Alfewd

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed -Manufacturer: Nucleus, lowering unit - flatbed for ultrasonic welding machines -Eco FR360102 -Servomotor: NuDC42I25R-1000 Voltage 24 V -Number: 5x lowering unit available -Price: per piece -Dimensions: 340/240/H130 mm -Weight: 4.5 kg/pc. Dedpfxsxrz Taj Alfjwd

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column Dwodpfxoy A Ifts Alfed -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Condition: good (used), Power: 15 KVA Djdpfem Twicox Alfswd Execution: 530 mm

Condition: good (used), – Power output: 15 kVA – Pneumatic Dwsdpfx Alezwkttefjd – 380V

Condition: used, Technical details: Dodpeu Nwxbefx Alfowd current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Machine not tested, on sale as is! i.D. *

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Dwedpfx Aleztyn Sefjd Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Electrode force: 235 daN Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch

Condition: used, functionality: fully functional, machine/vehicle number: 199715, input voltage: 380 V, T-joint welding machine IDEAL. We only used it to weld a single product in small quantities. We don't know its history before that (almost 30 years ago), as we acquired the machine at a bankruptcy auction back then. Dwsdpszzzgfsfx Alfed

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Dwjdoiknv Ejpfx Alfjd

Condition: used, Year of construction: 2007, machine/vehicle number: 0185476, Offer 26283 Technical data: - Water-cooled WIG – DC welding system, mobile - Welding current continuously adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - Including: - SYNERGIC control with programmable welding tasks - 2-cycle – 4-cycle setting - HF ignition and Liftarc - Gas pre-flow control, etc. - Hose set 8m, lightweight design - Ground cable - Pressure regulator - Space requirement approx. W 700 x H 1200 x D 1200 mm Dodoz Rwiyepfx Alfewd - Weight approx. 200 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Dwedpfxjqpgntj Alfjd Suction unit with hose guide

Year of construction: 2009, condition: used, functionality: fully functional, We are offering this used 6-head PVC window and door welding machine from SYMATEC, model SWA-6L-H, manufactured in 2009. Djdpfx Alszk Eabefewd If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Spot welding machine, projection welding machine, NIMAK Type PMP 5 / 35 Manufacturer's number: 88100, Year of manufacture: approx. 1988 Power at 50% duty cycle: 35 kVA Dodpfx Aljhubgzjfowd Reach: 250 - 450 mm Working stroke: 40 mm Electrode force: 100 - 460 kp, steplessly adjustable Electrode force at 6 bar: 460 daN Operating air pressure: 2 to 6 bar Electrode arm: Ø 60 mm Electrode holder: Ø 30 mm Insert electrodes, cone: MK 2, Ø 17.78 mm Arm distance: 200 / 400 mm Adjustability of the electrode holder: 200 mm Connected load: 83 kVA Mains connection: 380 Volt, 50 Hz - 4-cycle control - Stepless power adjustment - Single-point and multi-point welding - Parallel electrode guidance - Water-cooled (without cooling unit) - Electric foot switch Space requirement L x W x H: 1200 x 650 x 1500 mm Weight: 300 kg Good condition

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Djdpfx Aji Ab Unolfowd Technical data: - Grooving width: 1 – 15 mm - Cutter head with reversible cutting inserts - Grooving angle: 30° - 37.5° - 45° - 60° - Power supply: 220 V / 1100 W - Dimensions (approx.): W 450 x D 300 x H 350 mm - Weight (approx.): 20 kg - Transport case

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Dwedjznwq Tspfx Alfed

Year of construction: 2007, operating hours: 500 h, condition: reconditioned (used), functionality: fully functional, length of welding knife: 1,200 mm, welding power (max.): 12 kVA, width of welding knife: 20 mm, machine/vehicle number: 1157, High frequency welding machine to be overhauled 40cm arm, 1200x20 electrode, 12KW New bench to be redone of the desired length, price based on the length of the bench The price indicated is related to the machine on 8 meters of bench 1 year warranty Dsdpfj Air N Uox Alfowd

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Dwedszz Sdzopfx Alfsd Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order