Used Brian Beckum 315 Meat Saw for sale (12,623)

Condition: used, functionality: fully functional, Used BIANCO 370 MANUAL SAW. Nedpjzhupasfx Af Sjlg

Condition: used, functionality: fully functional, Used MANUAL SAW, BIANCO 370 M. OVERHAULED and REPAINTED. Nlodpfx Aozhuptef Sog

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Nodpfjz Akftjx Af Selg Router motor power: 1.1 kW Voltage: 380 V

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Autoclave Nlsdpoz Ak Ubsfx Af Seg ASCA TYPE = 215 E Completely made of stainless steel ADITEC control system 215 liter capacity 18 kW 2 full-size baskets Fully functional Shipping possible upon agreement.

Condition: excellent (used), Catalogue number: 7885 TECHNICAL DATA - Max main blade diameter: 400 mm - Max cutting height: 120 mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30 mm - Cutting length on sliding table: 1400 mm - Cutting width at guide: 1300 mm - With side sliding table - Guide on side table adjustable at angle Nlsdpfsztavisx Af Sog - Main saw motor power: 4 kW - 2 speeds: 3000/4500 rpm - Table dimensions: 1120x1020 mm - Table dimensions with extension: 1630x1730 mm - Extraction port diameter: 80 mm, 140 mm - Dimensions (L/W/H): 3300x2180x1450 mm – weight: 1040 kg ADVANTAGES – Polish production – DTR documentation – Used saw - Very good condition Net price: 9900 PLN Net price: 2360 EUR (at rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at parallel guide: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm with saw blade at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Dust extraction port D = 120 + 80 mm Angle stop extendable to 3,600 mm, Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable parallel guide adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP Sliding carriage made of anodized aluminum incl. high-precision guide made of Nledpfx Aowz Nbaof Sog hardened and ground steel Sliding carriage locking in any position Saw blade guard with swing-away device Outrigger with adjustable angle stop with length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices according to CE standard as inspected, Ex Works, from location Seevetal, without pre-carriage, freight and training, subject to prior sale.

Condition: used, machine/vehicle number: 650597, Motor: 1.65 kW Cutting length: approx. 2450 mm Saw blade diameter: approx. 150 mm Pneumatic blade tensioning Space requirement: approx. L x W x H mm 3000 x 1000 x 1600 Ex works, from Seevetal location, subject to prior sale, Njdoimd D Aepfx Af Selg Sold as is, without transport.

Condition: good (used), PEZZOLATO TM 400 – PROFESSIONAL LOG SPLITTER / WOOD PROCESSING MACHINE For sale: a professional log splitter from PEZZOLATO, model TM 400. This machine is designed for mechanical cutting and splitting of firewood. Its robust, industrial construction makes it ideal for farms, companies involved in firewood production, or wood processing plants. THE MACHINE IS 100% FUNCTIONAL AND READY FOR WORK. In addition, the discharge conveyor is equipped with a NEW BELT. TECHNICAL SPECIFICATIONS: • Manufacturer: PEZZOLATO S.p.A. – Italy • Model: TM 400 • Year of manufacture: 2009 • Machine number: SES3714 • Electrical power supply: 400 V • Electric motor power: 15 kW Nodpfxoz Awv Ej Af Solg • Machine weight: approx. 1600 kg • Chainsaw • Maximum cutting diameter: approx. 400 mm • Hydraulic splitting system • Discharge conveyor • NEW discharge conveyor belt • Option for tractor drive via PTO DRIVE: The machine can be powered in two ways: 1. Electric motor – 15 kW / 400 V 2. From a tractor via the PTO shaft – mechanical drive provided by the manufacturer Thanks to the PTO drive option, the machine can also be used in locations where there is no suitable electrical power supply. TECHNICAL CONDITION: The machine is fully functional and ready for further use. The saw, hydraulic system, log splitter, and conveyor are all working correctly. The discharge conveyor belt is NEW. Visually, the machine has normal signs of use and wear. These are signs resulting from the machine's use and age. The machine is used but technically sound and regularly maintained. DOCUMENTATION / NAMEPLATE: PEZZOLATO S.p.A. Model: TM 400 Year of manufacture: 2009 Machine number: SES3714 Electrical cabinet: • 400 V • 50 Hz • Nominal current 50 A • IP54 • Year of manufacture 2009 SALE: Sold complete, in the configuration shown in the photos. It is possible to view the machine and test its operation before purchase.

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport - 3000 mm feed gripper with single-stroke, rotating movement - Double miter saw - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports - General technical data in the appendix This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Nlodpfx Afez A Arce Seg Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 820 mm, total width: 1,010 mm, total height: 2,030 mm, For sale is a bandsaw from C.E. Reich. Type: Industrie 500 Year of manufacture: 2018 Saw band dimensions: 3800 mm x 16 mm Band speed: 30 m/sec. Nlodpfx Ajz Aibtof Sjg The Reich Industrie 500 bandsaw is a bandsaw with a fixed, welded table, portion stop, material pusher, and sliding table, suitable for cutting food products such as meat, bones, sausage, cheese, or fish. The food products can be processed fresh or frozen.

Condition: used, Year of construction: 2001, Fully automatic bandsaw Müller HBA 260 CNC (Dais + Partner) with minimal feed system and roller conveyor. Nlsdpfx Afoz Afgfs Seg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Cutting length 5000mm - longer in automatic mode, with automatic repositioning of the saw up to 10000mm Overhauled/like-new double miter saw with saw blades D=500 mm The machine can be motor-driven to swivel from 135 to 22.5 degrees and has a Nljdpfxjz Adywj Af Seg cycle control system. Software options for short cuts, macros, overlength cuts, crosscuts and cycle cuts are also available for this machine. Data transfer is possible (Orgadate, Schücal, etc.) Accessories: Moving roller conveyor, tensioner on roller conveyor, automatically extendable profile support between the heads.

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long Nedpfxjngz N Io Af Sslg 1 piece 140 mm Ø x 190 mm Ø x 173 mm long

Condition: excellent (used), passing width 1.000mm, stroke 800 mm, saw motor 22 kW or 30 kW, high adjustment by gear motor with brake, automatic lubrication pump, clamping carriage 6 m with 7 m rack, 6 mechanical clamping stations Njdpfxstzlrfo Af Solg

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Nsdpfow Eu Akex Af Solg 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Njdpfxeywh Hmj Af Sslg

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Njdpfxjh Anyfs Af Sslg Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Nedpfx Afsy Ni Ayo Sjlg

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9346, Machine in good condition Vertical saw blade diameter: 600mm Horizontal saw blade diameter: 500mm Nledpfx Aozp Rnnjf Sog Notching width: at 90 degrees, processing of profiles up to 300mm Miter cuts up to 30 degrees Maximum profile height: 280mm Notching depth: at 90 degrees, horizontally up to 185mm Material stop can be swiveled to 30 degrees, 90 degrees, 45 degrees Motorized adjustment of the angle with digital display

Condition: used, Year of construction: 1999, Used Machine Year of manufacture: 1999 Features and Technical Specifications: - Usable cutting length: 4200 mm - Usable cutting width: 3200 mm - Saw blade overhang: 70 mm - Max. cutting height: 60 mm - Main spindle motor power: 7.5 kW - Main saw blade diameter: 280 mm - Scoring saw motor power: 1.1 kW - Scoring saw blade diameter: 125 mm - Saw carriage feed speed (forward): 0–40 m/min - Saw carriage return feed speed: 40 m/min - Saw blade change: with key - One continuous pressure beam - Control system: Euroline 1 Njdpfxezy Dz Nj Af Solg - 99 programs - Panel cutting from the front - Final panel cut - Cutting with sensor - Air-cushion support tables: 4 - Exhaust ports: 140 mm at the bottom (required vacuum pressure: 800 Pa) - Exhaust ports on the pressure beam: 2 x 100 mm (required negative pressure: 830 Pa per exhaust port) - Air velocity: 20 m/s

Condition: excellent (used), Feeder with centering device for multi-blade saw. Power supply: 380/400V Pneumatic Automatic Njdpfxsz Afkkj Af Sslg

Condition: used, total width: 1,000 mm, total length: 1,400 mm, total height: 1,700 mm, Colour: Grey Nlsdpfx Ajzavq Djf Sog Weight: 200 kg - Documentation available: No - CE certificate present: No - Serial number: 165359 - Main motor power [kW]: 2.9 - Max. cutting height [mm]: 110 - Max. cutting width at 90° [mm]: 110 - Max. saw blade diameter [mm]: 350 - Saw arm tilt angle [°]: 165 - Saw blade tilt angle [°]: 90 - Voltage [V]: 380 - Current consumption [A]: 5 - Fuse [A]: 16 - Power [kW]: 2.9 - Transport dimensions: 1400mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 Njdpfsyy Nnqox Af Selg - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), operating hours: 12 h, For sale is a KILIA 65-liter high-speed cutter, which will undergo a comprehensive factory overhaul at HELTEK | KILIA. Our factory overhaul is not simply a repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently meets today's new machine standards for KILIA. This cutter is ideally suited for butcher shops, meat processing plants, and industrial production facilities for the production of a wide variety of meat, sausage, and food products. Scope of the Factory Overhaul The machine is first completely disassembled down to the base frame. This allows areas that are not accessible during normal operation to be refurbished. The factory overhaul includes, among other things, the following work: complete disassembly of the machine new base plate, professionally welded in refurbishment and blasting of the machine frame refurbishment or glass bead blasting of the stainless steel areas high-quality new powder coating of the base frame new main motor or completely overhauled Siemens main motor new motor tensioning device made of stainless steel new bowl drive or new gearbox complete overhaul of the bowl shaft bearing new bearings and relevant bearing components overhaul or renewal of the bearing seats new or refurbished knife shaft new knife shaft bearing new central lubrication system new wear parts new scrapers, guides, and sliding elements made of food-grade blue POM overhaul of all relevant mechanical components electrical system and controls completely new The electrical equipment is also comprehensively renewed. This includes, among other things: new PLC control system modern 10" HMI touch panel new frequency converters new contactors and relays new lines and cables new or refurbished sensors new safety technology complete rewiring of the relevant machine areas As a result, the cutter receives a modern control architecture with good spare parts availability and high serviceability. Nlodpfx Ajz A Ufzef Seg Technical Data Manufacturer: KILIA Machine Type: High-speed cutter / meat cutter / bowl cutter Bowl capacity: 65 liters Knife shaft speed: frequency-controlled, approx. 50–5,100 rpm Reverse operation / mixing mode: approx. 50–500 rpm Bowl speed: frequency-controlled, approx. 7–20 rpm Control: PLC Operation: modern touch panel Voltage: 400 V / 50 Hz After the factory overhaul is completed, the machine will undergo a comprehensive inspection and a FAT (Factory Acceptance Test). Advantages of the KILIA Factory Overhaul You will receive the extremely robust basic construction of a proven KILIA cutter, combined with modern drive, control, and automation technology. Proven KILIA quality. Modern technology. Ready for many more years of production. Warranty We provide a 6-month warranty on the factory-overhauled machine, in accordance with our terms and conditions. The knife shaft bearing is excluded from this warranty. Inspection and machine acceptance at our factory can be arranged.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, total length: 2,100 mm, total width: 1,070 mm, total height: 1,300 mm, overall weight: 700 kg, power: 12.5 kW (17.00 HP), year of last overhaul: 2025, It is an automatic machine for cutting frozen blocks of meat into slices. The Flaker features a special, high-speed stainless steel rotor that rotates and cuts the frozen meat blocks into thin slices. Nlodsz Daayjpfx Af Sjg