Used Bracket-With Shaft for sale (7,696)

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, overall weight: 47,000 kg, power: 383.93 kW (522.00 HP), fuel type: diesel, color: red, number of blades: 10, motor manufacturer: CAT, motor model: CAT C18, Rollers with 10/10 discs, each with 8 blades Crushing bar with comb Chain shoes Permanent overband magnet Water spray system Radio remote control Djdpey Uh N Aefx Albekt

Year of construction: 2018, condition: as good as new (ex-display), machine/vehicle number: TMA500x600mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dkodpfx Aedzqw Aslbet Dimensions: L: 800mm B: 800mm H: 820mm Inlet: 600x250mm Drum: Ø 500x600mm

Year of construction: 2018, condition: as good as new (ex-display), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox Dkodpfx Alsdzqxbobot + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Drum: Ø 220x400mm

Year of construction: 2018, condition: like new (used), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: Dkedpfxjc Tnh De Albot L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Drum: Ø 220x400mm

Condition: used, Year of construction: 2020, Oce Arizona 2260 XT flatbed printer Color: 6C – double (CMYK, 2 White) Speed: up to 67 m²/h Resolution: 1440 dpi, 6pl Variodot Format: 2.5m x 3.05m Roll option: 2.2m Year of manufacture: 2019, installed in 2020 New generation features: Automatic cleaning print heads Register pins Dodszud Skspfx Albokt New user interface Low-energy UV lamp

Condition: used, Year of construction: 2015, operating hours: 1,800 h, power: 99 kW (134.60 HP), Equipment: air conditioning, all wheel drive, cabin, VAT can be shown: Net selling price: €72,500 Well-maintained Fendt 313 Vario / SCR with original 1,800 operating hours. Very good condition. 1800 hours First owner 19% VAT can be shown If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. * Vario control * Multifunction joystick with cruise control, engine speed memory, automatic functions, hydraulic control * Varioterminal 7-A with button operation * Variotronic headland management system * Vario TMS tractor management system * Cabin * Air conditioning * One-piece windshield * Height and tilt adjustable steering column * Super comfort seat, air-suspended with backrest * Super comfort seat with seat heating * Co-driver's seat with automatic seatbelt * Particle filter (aerosol) * Segment windshield wiper at the front * Interior mirror * Work lights * Engine & transmission * Reversible shuttle function, stop-and-go function * All-wheel drive / differential locks * Comfort control for all-wheel drive / differential lock * Rear / front differential with 100% lamella lock and steering angle sensor * Load-sensing PTO shafts * Rear: Flange PTO shaft 540/540E/1,000 rpm * External control of the rear PTO shaft * Hydraulic system * Electro-hydraulic rear lift (EHR) * 1st and 2nd hydraulic valve at the rear * Hydraulic valve controls, cross lever, UDK couplings at the rear * Front weight 60kg * DL hydraulic system / 2-line system * Tow hitch, height-adjustable * Roof, white * Paintwork of superstructure in RAL color * Paintwork of rims on request * Heated rear window * Ventilation * Air conditioning * Super comfort seat, air-suspended * Floor mat, cabin * Steering wheel including rotary grip * Additional equipment bracket * Terminal bracket * Mirror bracket * Rear view mirror * Cabin suspension, mechanical * Work lights, roof front TWINPOWER * Work lights, fender * Work lights, roof rear TWINPOWER * VARIO TMS C267 * Rotating beacon * Color of superstructure RAL 1032 * Color of rims RAL 9006 White aluminum * 40 km/h version * PTO speed 540/540E/1,000 rpm * Rear PTO, single-acting, one valve, center right + rear Dksdpfx Asy I Hz Relbjt * Additional valve, single-acting 1/2, rear * Additional valve, single-acting 1/3, rear * Return line, center right * Top link, category 2 (not included) * Fuel pre-filter, heated * Tires: 360/80 R24 138D NO 30 8 W12X24 * Tires: 440/80 R34 155D NO 112 8 DW15L * Tread depth ~90% * Front track 1820 mm * Rear track 1800 mm If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. Trailer available on request (see last photo, Swopper converter). More offers at: The equipment was determined with the help of a VIN query, errors may occur for technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale reserved.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,011 h, functionality: fully functional, total length: 16,000 mm, total width: 3,000 mm, total height: 3,600 mm, overall weight: 40,600 kg, power: 360 kW (489.46 HP), Doppstadt DW3060K Büffel/Biopower/Type F/Selector HS-514/Shredder/Crusher/Industrial Shredder Dksdpfx Aszimm Holbot • Manufacturer: Doppstadt • Type: DW3060K Büffel • Year of Manufacture: 2018 • Operating Hours: 8011 hrs • Power: 360 kW/489 hp • Industrial Shredder • Engine: Mercedes Benz MTU OM471LA(6R 1300) EUROMOT IV, 6-cylinder diesel • Pneumatic spiral fan • Fuel tank: 2 x 300 liters • AdBlue • Telematics system • Crushing roller, size M • Length: 3 meters • Diameter: 80 cm • Tooth width: 7.4 cm • Tooth height: 8.5 cm • Number of teeth: 125 pieces • Throughput: 20-60 t/h, depending on the material • Magnetic belt • Track system: Strickland 335713-DK40-AA • 2 travel speeds • Loading height: 3.10 meters • Remote control • Central lubrication system • Transport length: 16 meters • Transport width: 3 meters • Transport height: 3.60 meters • Total weight: 40,600 kg • German machine • Ready for immediate use _____ Selector HS-514/Star screen with return conveyor • Screen size: 8-10 cm • 13 star shafts • Integrated support legs • The attachment is picked up by the machine and driven via the auxiliary hydraulics • Star shafts are reversible • Reversing mechanism: Hydraulic • Return system for larger materials • Discharge height: 3.10 meters • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Dkjdpszzkvpsfx Albet Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply Price € 3,950 Dkodpfx Aev Dm Epolbet

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 2 kW (2.72 HP), input frequency: 60 Hz, input voltage: 575 V, overall weight: 750 kg, Brand new twin-shaft batch mixer from BHS-Sonthofen for the intensive and homogeneous mixing of various bulk materials. Technical data: Type: DKXC 180 Year of manufacture: 2020 Nominal capacity: 180 liters / 0.18 m³ Drive: 2 × 5.5 kW Voltage: 575 V / 60 Hz Weight: approx. 750 kg pneumatically operated discharge flap Location: Canada The electrical control system was manufactured according to Canadian regulations and must be inspected for operation in Europe and, if necessary, modified to comply with European regulations. Dkjdpfx Alszumpxsbet The mixer has never been used. Technical specifications are subject to change without notice and are offered for sale subject to prior sale.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Dkjdpfx Ajzp H Tyjlbjt Frame for over-belt magnet Humidification system (prepared)

Condition: used, Year of construction: 2011, Booklet Size (min./max.): 105 x 210 mm to 325 x 450 mm Booklet Thickness: Max. 25 sheets (80 gsm) or up to 5 mm Max Speed: Up to 2,000 booklets per hour Stapling Options: Flat or loop (ring) staples Stapling Heads: Up to 4 heads can be used on 6 positions (2 standard) Power Supply: 220 V, 10 A Dimensions (H x W x D): 86 cm x 103 cm x 71 cm Net Weight: 240 kg Format: 325 x 450 mm Equipment: regular and optional eyelet sewing (standard staples, cheap to use)Stitching Heads: adjustable heads possibility to turn off sewing or folding (this allows, for example, sewing only) triggering from a button or a photocell counter of copies made lateral and frontal alignment indicator light indicating lack of staples SRA3 format Supports non-standard formats. Dkjdpfeziix Sex Albst

Condition: new, DRIVESHAFT BALANCING MACHINE BVI-03-88 Balancing machine for professional repair of cardan shafts up to 200 kg. The hard-bearing machine is adapted for heavy cardan shafts of trucks and special machinery. The high sensitivity of the supports allows also high-quality balancing of cardan shafts of passenger cars. The machine is designed for balancing cardan shafts in the facilities of cardan repair workshops. The machine can be quickly reconfigured for balancing a large amount of single cardan shafts of various designs, as well as for the production of small batches of shafts. . . . TWO TIMES faster then your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . .. ... HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 5200mm, weight up to 200kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Hard-bearing type machine - safe balancing of shafts with large initial unbalance • Machine is operated by one worker • Sliding tailstock spindle - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 200 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 5200 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2500 rpm Parameters of the supply network 380V, 3 Ph, 50Hz Dkodpfxon E Skwj Albjt Power consumption, minimum, 3 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 1100 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis, semi-trailer container - Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and 2 kingpin positions - Front locking on tipping ram mounting bracket with guide wedges on both sides, rear locking on continuous twist-lock shaft with return spring - Without subframe, for self-supporting containers - Container mounts: locking crossmember, twin-point for locking 1 x 30 ft container - 24 t 2-speed landing legs, single-side operation, with straight foot, without slide compensation - Clear landing leg corner dimension / rear swivel clearance approx. 1850 mm - 2 wheel chocks with holder - Aluminium side underrun protection - without rear underrun protection - Half-shell mudguards - with anti-spray mudflaps to EC standard #Hydraulics - Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Caution! Tipping angle limited! - Hydraulic actuation via truck PTO - Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut #Axles + Suspension - BPW disc brake axles with 430 mm disc diameter - "Laser-aligned axles/chassis", reducing tyre wear and fuel consumption - Staggered axle spacing 1410/1310 mm (combined transport) up to 44 t gross train weight - Air suspension - 1st axle automatic lift axle, including forced lowering and traction assist, activated by "3x braking" (traction assist functions up to an axle load excess of 30% and up to a speed of max. 25 km/h) #Braking system - Two-line compressed-air braking system - Colour-coded line routing for easy servicing. - Spring-loaded parking brake - 2 mismatch-proof coupling heads at the front, without connecting line - 24 V EBS electronic braking system with EBS socket at the front, without connecting cable - Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! - with raise & lower valve - Vehicle driving stability system - Axle load detection via EBS CAN bus signal, for display on the cab monitor; the truck must be pre-fitted accordingly, no installation on the truck included (not a calibrated weighing system) #Wheels and tyres - 385/55 R22.5" make at the manufacturer's discretion - Steel rims, factory silver #Electrics - 24 V multi-chamber lights, yellow LED side lighting - 2 white LED position lights at the front - 2 white/red outline marker lights at the rear - 2 x 7-pin mismatch-proof sockets at the front, without connecting cable #Country of registration / Plates - Type approval to EC 2007/46 - 24/7 service hotline - prepared for single-line number plate holder - Contour marking with reflective strips to ECE R048, white on the sides and red at the rear #Paintwork Dsdpjzy N Hkofx Albskt - Frame: RAL colour of choice - "10-year warranty against corrosion perforation" - Landing legs: black coated

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Dedjw Dy Hlopfx Albekt Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 500 kW (679.81 HP), Stationary shredding plant ARJES VZ 950 E PU. Electric drive, 2 x 250 kW. Dkodpfxszv Tw Se Albet Includes conveyor belt / discharge belt.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Type: TruLaser 5030 fiber (L41) Laser power: 5000 watts Year of manufacture: 2012 Control system: Siemens Sinumerik 840 D Working area: 3000 x 1500 x 115 mm Operating hours: 66,934 h / 43,313 h Max. sheet thickness/steel: 25 mm Max. sheet thickness/stainless steel: 20 mm Dsdjzmf R Sopfx Albskt Max. sheet thickness/aluminum: 20 mm Max. speeds: 235 m/min Accuracy: 0.10 mm Length: 8300 mm Width: 4800 mm Height: 2400 mm Weight: 12,000 kg Operating hours: approx. 67,000 hours

Condition: reconditioned (used), functionality: fully functional, BULA MP133 - Rotary table polishing machine make Bula, model MP 133 for sale Continuously revolving machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 8 workpiece holders mounted in a pitch circle of 600 mm. 3 processing stations, drive power per station from 4 KW, with Bula Quick Lock system of the polishing discs. Polishing shaft diameter 30 mm für BULA QuickLock Max. disc width 150 mm Max. disc diameter: 350 mm Base area approx. 1900 mm wide, approx. 2400 mm deep, 1700 mm high The machine is completely reconditioned, cleaned, sandblasted, primed and repainted. The BULA MP136 was equipped with new engines, a new gearbox and a new control cabinet. All drives are infinitely variable via frequency converters. Furthermore, the following has been renewed: bearings, belts, screws, hoods, etc. The machine is available immediately. Further technical details and price on request. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 3 high-pressure dosing pistols WIDOBERG HDP-2, brackets, timer, etc. and pressure tank). Dkedpowvq Ahsfx Albst Picture is just an example !

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: 1 unit Forrec AE 600/30 single-shaft shredder: - Drive: 30 kW - Dimensions: 2,250 x 3,050 x 1,600 mm Dedpfx Asztaurelbekt - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm - Hopper capacity: 750 liters - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz.

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Dodpfx Asya Hmiolbekt Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, overall weight: 20,000 kg, power: 202.26 kW (275.00 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C7.1, Shafts with 7/7 discs, each with 5 knives Crushing bar with comb Dkedpjzh Hgwjfx Albet Robust hooklift frame Wheel axle with drawbar Permanent overbelt magnet Water spray system

Condition: like new (used), Meat grinder with mixer AK RAMOON 32. Dkodpfxex Ndqfe Albjt

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992, OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Dkedpfx Aljy Emnxjbjt

Condition: used, 26,2m3 heated tank with a connical bottom. Diameter: 3.50m Dodpfx Asun Nvbelbekt Total height: 3.70m The tanks have been used to store wine.

Condition: used, Year of construction: 2023, operating hours: 447 h, power: 183 kW (248.81 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, Technical Data ----Engine * DEUTZ TCD 6.1 L06 4V, Emission Stage V (Tier 5) * 6 cylinders, 6057 cm³ displacement * SCR system, EGR, passive DPF * Rated speed: 2100 rpm * Power at rated speed: 237 hp / 174.4 kW * Max. power: 247 hp / 181.3 kW * Electronically controlled Visco fan "eVisco" ----Transmission * TTV transmission T7780 (continuously variable), two automatically switched driving ranges * PowerZero, adjustable Powershuttle * Four driving strategies: Auto+, Auto, PTO, Manual * Three electronically switched rear PTO speeds (540E/1000/1000E) ----Hydraulics & Lifting System * Load-sensing variable displacement pump, 210 l/min flow rate * 5 additional control valves, electro-hydraulic, flow and time control * Rear lift with electronic control (EHR), 11,100 kg lifting force * Front lift with double-acting cylinders, 5480 kg lifting force * Duo front PTO shaft 1000/1000 ECO 1/min, electro-hydraulically switchable * Hydraulic lower link stabilization ----Tires * Front: 600/70R30 Djdpfezu U Snex Albjkt * Rear: 710/70R42 * Brand: Trelleborg ----Brakes & Axles * Braked front axle, sprung, ASM 100% differential lock * Two-circuit air brake system * Engine brake in combination with air brake system Equipment ----Cab & Comfort * MaxiVisionPro cab, pneumatically suspended, automatic climate control * Seat Max-Comfort Dynamic MSG97AL DOS EVO, swiveling, air-conditioned * Passenger seat upholstered with seat belt * DAB+ High Level radio, Bluetooth, USB, hands-free function * InfoCenterPro with 5" TFT color display * iMonitor3 in 12" (incl. TC-SC, GEO, VRC, AUX-N, UT, ISOXML) * XLarge Vision: Electrically adjustable & heated XL telescopic rear mirrors * Roof hatch with UV coating * Various LED work lights (a total of 8 on the roof, more on the hood and fenders) * Dirt-repellent floor mat, bracket for external monitor ----Electronics & Connectivity * CTM 1.2, Connectivity package for 1 year * AGROSKY Performance Steering ready with "EASY STEER" * Preparation for ISOBUS implement control (ISO 11783) * GNSS receiver SR20 PRO for RTK NTRIP (Galileo/GPS/Glonass) ----Special Equipment & Design * Warrior Equipment: lettering, LED headlights, muffler with stainless steel trim * Equipment "WARRIOR MATT BLACK" * Driver's seat Max-Comfort XXL partial leather * Chrome grille over exhaust pipe * 50 km/h Super-Eco, 50 km/h ECO Germany ----Further Features * Various sockets (e.g. for trailers with ABS, 7-pole for implements) * Automatic trailer hitch, height-adjustable * Trailer drawbar long ball K80, forced steering K50 * Various toolboxes, operating manual, maintenance and safety instructions ----Vehicle Number 9378-----Errors and prior sale excepted