Used Bow Press for sale (28,951)

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm Pedpfxei Amnpe Adnsgw width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: excellent (used), Year of construction: 2005, pressure 40 t dayligth max ohne Richtbrücke 885/ mm daylight mit Richtbrücke 595 mm throat 250 mm straightening stroke 170 mm feed down 7-50 mm/sec Pgjdjxylqlopfx Adnsw feed up 0-139 mm/sec table height o. Richtbrücke 700 mm table height m. Richtbrücke 990 mm work piece - max. 1000 mm table length 1500 mm table length m. Verlängerung 2.500 mm table width 305 mm total power requirement 7,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. BTH 2,5 x 1,58 x 2,75 m Includes alignment trolley with connectors Includes work light Includes accessories Includes oil return filter Includes documentation

Condition: ready for operation (used), Year of construction: 1996, Used Comafer 50/40 briquetting press. The briquetting press has undergone a complete overhaul. Pedpfx Adsxzu Rdonjgw

Condition: used, 7006 ARRASATE ECCENTRIC PRESS MODEL C.I. 125 tN (7006) Liquidation through auction due to cessation of activity and permanent closure of a second-hand industrial machinery tool company Machine Type: Mechanical Eccentric Press Pressure at 30° before bottom dead center: 125 tons (approx.) Main Technical Features Sheet metal cutting capacity: 3125 mm² Stroke: 20 – 140 mm Closed height between table and ram base: 330 mm Ram adjustment: 100 mm Number of strokes per minute: 60 Motor power: 15 kW Engine revolutions: 1450 rpm Approximate net weight: 9,000 kg Pgedpfxjxzunvo Adnew Dimensions Table: 1200 × 700 mm Table opening: 445 × 445 mm Ram base: 750 × 600 mm Throat depth: 350 mm Distance between uprights: 450 × 450 mm Overall dimensions: 2015 × 2720 × 1200 mm

Condition: ready for operation (used), Offered is an ODMI molded part press, year approx. 1980. 4 hydraulic cylinders, 1-4 cylinders, hydraulic pressure max/min 250bar/30bar, pressing force up to 50t per cylinder, 2 pressing stations, automatic operation, opening height 1120mm, cylinder stroke approx. 800mm, piston diameter 160mm, piston area per cylinder 201cm². Table size X/Y 745mm/2140mm, known defects: pull cord not correctly wired according to press inspection, emergency stop not up to current standard. Right cylinder with slightly leaking piston seal. Dimensions X/Y approx. 3200mm/1300mm, weight approx. 8000kg. Inspection possible by arrangement. Pedpfxoxzt Dvs Adnjgw

Condition: good (used), Year of construction: 2018, Self-clamping wedge grips 100KN. The wedges remain stationary over the shaft when the initial gripping force is applied to the specimen, preventing excessive compression of the specimen prior to testing. The clamps are used with cross-hatched jaw faces for clamping flat specimens. Pgodpfx Adsupfk Dsnew Clamping dimensions H75mm W50mm Opening width 14mm

Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP Podpfx Adjw Sgnkonogw GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, Pneumatic Clutch Press Belt Model BREN 160 TN (1323) Liquidation by auction due to end of activity and definitive closure of a used industrial machinery tools company Pgsdpexzui Tofx Adnow Brand: BELT Model: BREN 160 Frame type: Gooseneck Number of guides: 2 Main Technical Features Nominal force: 160 tons Stroke: 20 – 160 mm Strokes per minute: 42 Table height to slide: 660 mm Ball elongation: 90 mm Adjustable stroke: Yes Engine power: 12 hp (≈ 8.8 kW) Dimensions Table: 1250 × 610 mm Slide: 850 × 500 mm Table hole: 350 × 350 mm Gooseneck depth: 320 mm Opening between uprights: 395 mm Distance from table to floor: 850 mm

Condition: excellent (used), Year of construction: 2013, LAMELLAR - CASE CLAMP GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically operated adjustment of both press beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir. - Clamping is performed electrically using two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per press beam. - The pressing force of the press beam is electronically regulated and set via frequency converter, thus torque transmission is completely wear-free. - Pressing and adjustment speed: 25 mm/sec. - Very simple operation via 6 separate push buttons; 6 movement operations can be selected via the controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours). - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm. Depth: 700 mm 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Machine No. 380.324 Pjdew Tdymspfx Adnegw 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine used: Year of construction: 2013, fully overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - immediately available -

Condition: used, Pneumatic Clutch Press, BELT brand, Model 160 TN. (3211) Being liquidated at auction due to cessation of activity and permanent closure of a used industrial machinery dealer. Brand: BELT Model: BREN 160 Frame Type: Gooseneck Number of guides: 2 Main Technical Specifications: Nominal force: 160 tons Stroke: 20–160 mm Strokes per minute: 42 Table height to ram: 660 mm Ram extension: 90 mm Adjustable stroke: Not specified (adjustment available) Motor power: 12 hp (≈ 8.8 kW) Dimensions: Table: 1250 × 610 mm Ram: 850 × 500 mm Table aperture: 350 × 350 mm Gooseneck throat depth: 320 mm Distance between uprights: 395 mm Distance from table to floor: 850 mm Overall height: 3360 mm Width: 2050 mm Depth: 1900 mm Podpfjxzuhiex Adnogw

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Podpfx Adjh D If Hjnegw Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: used, ROVETTA ECCENTRIC PRESS MODEL F-300 300 TN (1471) Psdpexzud Dofx Adnegw Liquidation by auction due to cessation of operations and definitive closure of a pre-owned industrial machinery company. Brand: ROVETTA Model: F-300 Force (ton): 300 Stroke: 180 mm Number of strokes per minute: 100 Distance between uprights: 640 mm Ram dimensions: 620 x 620 mm Table dimensions: 620 x 620 mm Shut height: 450 mm Ram adjustment: 90 mm Piston force: 2 ton Piston stroke: 50 mm Motor power: 30 kW Height: 4000 mm Width: 1600 mm Depth: 2900 mm Weight: 7500 kg.

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Pgodpfxjtnz Tto Adnow Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, AMADA-PROMECAM THREE-AXIS ELECTRONIC HYDRAULIC PRESS BRAKE MODEL STPC 160 30 S00308 NO. P171 (7385) Auction liquidation due to cessation of activity and definitive closure of a second-hand industrial machinery tools company Brand: Amada Model: STPC 160 T / 4100 Capacity: 160 t Podpsxzua Esfx Adnogw Length: 4100 mm Folding length: 3.1 m CNC: Amada brand CNC Model: DNC 7000 Type: 160-40 STPC Stroke: 220 mm Motor Power: 13 kW Weight: 11,500 kg Pneumatic axes: 4 Tools included

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) Pgodpeiidm Nofx Adnow - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: used, AMADA-PROMECAM THREE-AXIS ELECTRONIC HYDRAULIC PRESS BRAKE MODEL STPC 160 30 S00308 No. P172 (7384) Liquidation by auction due to cessation of activity and final closure of a used industrial machinery trading company. Brand: Amada Model: STPC 160 T / 4100 Capacity: 160 t Pgsdpoxzt Tkjfx Adnjw Bending length: 3.1 m CNC: Amada DNC 7000 Type: 160-40 STPC Stroke: 220 mm Motor power: 13 kW Weight: 11,500 kg Pneumatic axes: 4 Tooling: included

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Psdpfx Adeil Hggenegw Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, ECCENTRIC TABLE PRESS 1120 X 850 BRAND SMERAL MODEL LE-250 250 TON (4659) Liquidation by auction due to business cessation and definitive closure of a second-hand industrial machinery tools company. Brand: SMERAL Model: LE 250 Psdpfx Asxzt Nxsdnegw Frame: C-frame (swan neck) Force (ton): 250 ton Stroke: 30 - 140 mm Shut height: 360 mm Slide adjustment: 110 mm Table dimensions: 1120 x 800 mm Ram dimensions: 800 x 475 mm Bolster plate thickness: 110 mm Distance between uprights: 90 mm Lateral distance: 400 mm Safety: Mechanical Machine weight: 12,800 kg Overall machine dimensions: 2995 x 2580 x 1350 mm Height above floor: 2975 mm Number of strokes per minute: 45

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Pedodvltyjpfx Adnsgw The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Pgodsxgbxfopfx Adnew Location: Ex stock - Immediately available -

Condition: new, Year of construction: 2025, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed Item number: 3300265 TECHNICAL DATA Pgodpfx Asgx T I Uednsw Dimensions and weights Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Weight (net) approx. 185 kg Max. width/depth (product) approx. 985 mm Max. height (product) approx. 1700 mm Electrical data Drive motor power: 1.5 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Cutting ranges Cutting range 0° round (solid material) 225 mm Cutting range 0° square (solid material) 190 mm Cutting range 0° rectangular horizontal (solid material) 150 x 245 mm Cutting range +45° round (solid material) 145 mm Cutting range +45° square (solid material) 150 mm Cutting range +45° rectangular horizontal (solid material) 190 x 150 mm Cutting range +60° round (solid material) 90 mm Cutting range +60° square (solid material) 90 mm Cutting range +60° rectangular horizontal (solid material) 120 x 90 mm Explanation of cutting range: Cutting range determined based on the weight of the saw frame with aluminum. May vary depending on the material used and may be smaller (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: From stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Pgedocdr E Ajpfx Adnsw Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Subject to prior sale

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l Pjdpfx Adsdwh E Asnegw working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Pgedotnz Hbjpfx Adnew Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Year of construction: 1985, condition: excellent (used), Edge gluing press for veneer, solid wood and plastic, model HFK 2200, for trimming edges during press time. When using heat-curing glue, we achieve pressing times of 20 to 30 seconds for veneer edges. Maximum working size approx.: 1,400 x 2,500 mm Heating: 1.7 kW Electro-pneumatic edge press Haug HFK 2200 for pressing edging material onto wood, with heating. Pgodpfx Ajw Apqqednsw 3 table extensions Swiveling work table Location: ex stock 54634 Bitburg - immediately available -