Used Bona Edge for sale (4,825)

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm Hedeb A Hhtjpfx Ah Nofb -Weight: 42 kg

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Hfodpfx Asu Ngfdsh Nsb Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: excellent (used), SCM internships in excellent condition Hodjt Hkq Rspfx Ah Nofb

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support Hsdpfx Ahox Rpf Rs Nefb - Joint milling unit FG 201 with 2 milling heads - Single edge feeder Automatic transport for coil and strip material - Glu Jet GJ 301 adhesive application system Automatic glue height adjustment (sensor nozzle) - Pressure unit 1912-3 pneumatic - End trimming unit 1918 (60 mm) pneumatic - Extraction hoods for end trimming unit - Multifunctional milling unit FR 201 - Corner rounding unit 1832 for edge thickness up to 3 mm - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4–6 mm Feed speed: 10 m/min Total length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Availability: short-term Storage location: Flörsheim

Condition: excellent (used), Hebrock F4 edge banding machine Well equipped, option to inspect before purchase. Pre-milling cutters, Glue application with roller, Equipped with glue discharge, Interchangeable glue pot Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for finishing, Top and bottom milling aggregate, R1 – R2 pneumatically adjustable, Hfedpfoxq A Ebsx Ah Neb Profile scraper, Corner rounding unit, pneumatically adjustable, Flat scraper, Nesting package included, Maximum workpiece height: 45mm, Maximum edge thickness in rolls: 3mm, Feed speed: 7m/min, Power requirement: 7.4KW, Machine checked, ready for testing, in very good condition. Only 15,000 meters worked.

Condition: new, Year of construction: 2026, functionality: fully functional, Modern edge banding machine designed for precise finishing of furniture panel edges. Equipped with robust units and advanced features, it ensures high quality, efficiency and operational flexibility at speeds up to 20 m/min. An ideal solution for manufacturing facilities prioritizing quality and repeatability. Edge banding machine for furniture panels FEATURES & EQUIPMENT 1. Pre-milling – preparation of panel edge for gluing. 2. Glue application unit in standard version equipped with a single, non-interchangeable glue pot. 3. End trimming – precise trimming of the leading and trailing edges of the banding tape. 4. Rough and fine milling – perfect matching of the edge tape to the panel contour. 5. Corner rounding. Hedpfsxfq E Eox Ah Njfb 6. Scraping unit / wet polishers (optional) – perfect smoothing and polishing of the edge. 7. Capability of edging panels with drillings (optional).

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Comprising: Hsdpfx Ahjqi Hqio Nofb - Feeding table Profi TBL100/20/06 (HOMAG, year 2014) - Profile KAL310/7/A3 (HOMAG, year 2014) The KAL is suitable for processing coated wood-based materials: - With melamine edges 0.3-0.4 mm - With ABS and PP edges 1.0-2.0 mm (tools available: R 1.0, 1.5, 2.0) The machine is additionally equipped with a grooving unit for vertical and horizontal grooving and rebating. If interested, the complete order confirmation can be provided. The machine must be dismantled and loaded by the purchaser.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202.01.006.16, feed rate X-axis: 12 m/min, total length: 3,940 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Regularly serviced by the manufacturer Hjdpfxexuik So Ah Nsfb All operating manuals available Replacement due to upgrade to a larger machine

Condition: excellent (used), SCM contura in excellent condition Hedpfxjt E T I Ns Ah Nsfb

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Hodpfxexymd To Ah Njfb Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: new, Year of construction: 2026, Heavy machine base guarantees high torsional rigidity and vibration-free operation Better sanding results due to sanding belt oscillation via separate gear motor Oscillation optionally switchable Veneer edge sanding device with fine adjustment as standard Grooved infeed ruler for sanding veneer overhangs Hfjdpfx Aheff Ed Tj Nob Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for utilization of the entire sanding belt width Height adjustment of the sanding table and sanding unit swivelling via hand wheels Height-adjustable additional table with suction device for grinding radii Optimum chip removal through extraction at the unit and at the cross table Automatic compensation of strip length differences due to spring-loaded strip tension Dimensions and weights Length approx. 1900 mm width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Suction socket diameter 120 mm Drive power Oscillating motor 0,25 kW Work table(s) Working table length 960 mm Working table width 352 mm Working table height adjustment 210 mm Cross table height min. 730 mm Electrical data Input power 3 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s grinding surface length 1050 mm Grinding surface width 220 mm Swivel 0 - 45 ° Oscillation stroke 20 mm Availability: Short term

Condition: excellent (used), Year of construction: 2005, Brandt KDF 530 C Edgebanding Machine with Jointing, Corner Copying, Two Scrapers, and Riepe Spray Units. A video of the machine in operation can be provided upon request. The machine is highly automated. Edge thickness: approx. 0.4 – 8 mm Workpiece height: approx. 10 – 50 mm Feed speed: approx. 11 m/min Soundproof enclosure Extendable workpiece support Extraction connections: 1x200 mm, 1x100 mm, including the ducting shown PC16 control system with color display for easy machine operation Hodpfxexd Dude Ah Njfb Units: - Pressure beam manual adjustment with SIKO counter - Infeed fence manual adjustment with SIKO counter - Riepe release agent spray system - Jointing milling with Leitz WhisperCut carbide-tipped jointing cutters, resharpened - Gluing station switchable between clockwise and counterclockwise operation - Pressure zone with 3 rollers - Cross-cut saw with 2 motors, for straight or beveled cuts (program adjustment) - Combination milling unit with motorized side adjustment - Radius scraper R2, pneumatic adjustment - Corner rounding unit R2 with 1 motorized diamond cutter, pneumatically adjustable between thin and thick edges - Glue joint scraper, pneumatically retractable with large roller - Riepe cleaning agent spray system - Buffing unit Hood lock CE marking Operating manual as binder and CD All reversible blades of the milling and scraper units have been replaced or rotated, saws resharpened, jointing cutters resharpened, buffing discs replaced. The machine is immediately ready for use. Only the diamond cutter on the profile milling unit has not been replaced but remains sharp. Minor paint touch-ups. Approx. 3500 operating hours. The machine's condition speaks for itself. Occasionally, the PC reboots while the machine is running (mostly at high room temperatures), but this has never posed a problem for us and work can continue in the meantime. Machine dimensions approx. 4800 x 1200 x 1800 mm (L x W x H) Weight approx. 1900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see “other offers from this seller.”

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Hfsdev N I Hlspfx Ah Neb Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Hfedpfsxy Tm Ijx Ah Neb

Condition: like new (used), Edge milling machine for deburring/beveling of various internal and external contours Hfedpjtwcn Rsfx Ah Nob Bevel size adjustable up to max. 10 mm at 45° Cutter 45° / 8 blades double row – KIF/MF. For steel, light metal, stainless steel, cast iron, non-ferrous metals Includes 21 packages of 10 indexable inserts X11.30.35.45 P25 BS TiCN Includes 7 packages of 10 fastening screws for X11.30.35.45 Available at extra cost: 1 milling head 30° 1 milling head 35° 1 milling head 45° 1 milling head 60° Ex works, excl. VAT.

Condition: excellent (used), functionality: fully functional, total length: 9,400 mm, overall weight: 4,000 kg, Feed rate infinitely variable from 18 - 24 m/min For edge material from rolls or strips up to 20 mm edge thickness Transport chain 80 mm wide with rubber padding Workpiece support in scissor design, extendable up to 1000 mm Infeed extension 500 mm Feeding unit with two driven, angled rollers Processing units: Hjdow Sdlmopfx Ah Njfb Jointing milling unit with 2 motors, each 3 kW A20 gluing unit HL83 end trimming unit, beveled/straight, with 2 motors each 0.5 kW Pre-milling unit with 2 motors each 1.5 kW FK 8-fold automatic contour trimming unit with 2 motors each 0.55 kW MN automatic multi scraper unit Glue joint scraper unit Buffing unit, top and bottom, with oscillation Chip conveyor belt Electronic frequency converters for processing units HOMATIC control system with NC21 input unit Machine length 9500 mm. Machine in good condition.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Condition: Completely overhauled, excellent! Feed speed: infinitely variable, 10-18 m/min Hodpfsw I Uhqsx Ah Nefb Control unit: edge control 19 with 18.5" color touchscreen display Jointing milling unit 1802 Edge feeder 1901 Glue application station Cartridge 1906MG, with tracking nozzle and automatic glue height adjustment Pressure unit 1913, pneumatic End trimming unit 1918 Multifunction milling unit 1826 MOT 6 with 6 servo axes for flush, radius, and bevel milling Copy milling unit 1983 Radius scraper unit 1929 with pneumatic adjustment (retrofitted; see photo) Flat scraper 1964 Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Total length: 5195 mm Extraction connection: 180 + 80 mm, 2100 m³/h Compressed air connection: 6 bar / 327 NL/min Weight: approx. 2200 kg Availability: approx. 2-3 weeks after order confirmation Location: Flörsheim

Condition: excellent (used), Year of construction: 1994, Langzauner Edge Sanding Machine EK 3/4 - School Machine - Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Round sanding support Oscillation Hfodjx Nrfwopfx Ah Nob Height adjustment: table, manual Sanding belt tiltable: Yes Conformity marking: CE mark Total connected load: 4.6 kW Space requirements: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm Hfedpfx Ahjx Ngt Ne Nsb - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Hjdsxfh Tmjpfx Ah Nefb Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with rolling block chain (instead of standard chain), enhanced mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Includes: Edge banding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / feed table HOMAG POWER TBL100/30/30/S Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F Hfodpfewvlhlex Ah Nob Edge bonding with PUR and EVA adhesives.

Condition: used, Storage location: Sonnefeld Hfjdpfx Asway Dcjh Nsb

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Hsdpfsvvkdtex Ah Nsfb

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Hfsdpfxovvkd Tj Ah Neb

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Hodpfx Ahsvvkfde Nofb