Used Blower for sale (1,092)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components Kjdpfx Aozp Rmqjh Ejdt The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: good (used), Year of construction: 1997, functionality: fully functional, We are offering a boiler from the renowned company Urbas. The boiler has a heating output of 500 kW. Type: UR-RR-500. Kedpezvxv Tsfx Ah Ejdt The boiler burns biomass (bark, wood chips, logs, and sawdust). Year of manufacture: 1997 Wiring, complete valve and pump set included. Multicyclone. Excellent technical condition. Optionally, for an additional fee, the boiler is available with a movable floor and chimney.

Year of construction: 2008, condition: excellent (used), Blower station AERZEN GM90 S no. 896925 2008 Blower GM90 S no. 896925 59.80 m3/min 1 bar 93.80 kW 2008 Kjdpfx Ahsv D Ey Es Ejdt Engine AERZEN 110/125kW no. OC30249 2008

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, For sale: Aerzen GM 130L blower after refurbishment. 12-month warranty. We carry out blower overhauls. Kdedpjxzdvcsfx Ah Ejt

Year of construction: 2022, condition: used, A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available. Kjdpfx Aoz Dki Eoh Eedt

Year of construction: 2006, condition: excellent (used), functionality: fully functional, machine/vehicle number: 859178, Aerzen GM35S blower Ksdpfx Ajvrhaqeh Eodt no. 859178, 2006 7.32 m3/min, 12.70kW 1 bar 2006

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 920 kW (1,250.85 HP), overall weight: 3,465 kg, total width: 1,281 mm, total length: 2,606 mm, total height: 1,595 mm, pressure: 6 bar, nominal heat output: 920 kW (1,250.85 HP), temperature: 183 °C, tank capacity: 801 l, fuel: liquefied natural gas (LNG), operating pressure: 6 bar, Equipment: documentation/manual, For Sale: Full working and complete Industrial Gas Boiler System Buderus Logano GE615 – 920 kW | 2023 | Excellent Condition High-performance industrial heating system for sale, commissioned at the end of 2023 and operated for only two heating seasons (2023/2024 and 2024/2025). The system is currently fully operational and can be inspected and tested under working conditions. Sold as it is with all the hardware including stainless steel chimney, electrical distribution panel and complete interior fittings included in the price. The installation was professionally executed and regularly maintained. The system is in excellent technical condition with no leaks, corrosion, or structural defects. The boiler can be adapted for alternative fuel operation (e.g. LPG or oil) subject to burner configuration and technical adjustment. Main Configuration: Boiler Buderus Logano GE615 – 920 kW Nominal output: 821 – 920 kW Number of sections: 13 Flue gas temperature: 139 – 183 °C Length: 2606 mm Width: 1281 mm Height (without control unit): 1595 mm Flue connection: 360 mm Kdsdey Tp Evopfx Ah Eet Weight: 3465 kg Burner: *Weishaupt VW-G 10/4-AZM Gas Burner Control System: *Bosch CC8311 Control Unit Circulation Pumps: *2 × Wilo Yonos MAXO 80/0.5-12 Technical Specifications: Type: Industrial cast iron gas boiler Fuel: Natural gas/Diesel Condition: Fully operational Year of installation: 2023 Operating period: 2 heating seasons only Inspection and live test possible on site Suitable Applications: Hotels Hospitals Manufacturing facilities Administrative buildings Schools Greenhouses Logistics and industrial centers Additional Information: Automation and circulation pumps included Dismantling and transport can help with logistics Sale as a complete boiler room system Price EUR 58,000 EXW plus VAT Contact G. Jordanov Location: Ruse,Bulgaria

Condition: like new (used), functionality: fully functional, type of input current: DC, input voltage: 230 V, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Industrial Gas Infrared Heaters Lersen COMPACT TOP COUT08 – 2 Units For sale: 2 industrial gas-fired infrared radiant heaters, Lersen CZ COMPACT TOP, model COUT08. Suitable for heating production halls, warehouses, workshops, and other large industrial spaces. Technical specifications: Manufacturer: Lersen CZ s.r.o. Type: COMPACT TOP Model: COUT08 Quantity: 2 units Fuel: G20 natural gas Rated input: 37–48 kW Rated heating output: 33–43 kW Gas consumption: 3.5–4.6 m³/h Electrical connection: 230 V / 50 Hz Electrical consumption: 70 W CE marked Made in the Czech Republic Both units are being sold together. The condition can be seen in the photos. Price for both units: €1,250 Location: Ivanka pri Nitre, Slovakia For further information or additional photos, please contact me via message. Kodpfxjzvainj Ah Esdt

Condition: good (used), Year of construction: 2002, functionality: fully functional, input frequency: 50 Hz, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Kdedpfsu A Illsx Ah Eet Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm weight 110 kg

Year of construction: 2019, condition: refurbished (used), GM 90S blower, refurbished 12-month warranty Ksdpfx Ahsztqfbe Esdt New, unused model from 2025 also available.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21/A186898, power: 141.7 kW (192.66 HP), overall weight: 628 kg, total width: 1,020 mm, total height: 2,385 mm, type of input current: AC, input voltage: 230 V, nominal heat output: 141.7 kW (192.66 HP), temperature: 90 °C, fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, Equipment: documentation/manual, hot water, type plate available, Professional ACV HeatMaster 200 N Boiler – 141.7 kW – Year 2021 For sale: used ACV HeatMaster 200 N boiler, manufactured in 2021. High-capacity boiler with integrated domestic hot water production, suitable for commercial buildings, public institutions, hotels, farms, workshops, and installations requiring significant heating and hot water needs. Key features: Brand: ACV Model: HeatMaster 200 N Year: 2021 Maximum useful power: 141.7 kW Maximum input power: 154 kW Fuel used: propane (LPG) Domestic hot water tank: 400 liters Primary circuit capacity: 241 liters Maximum temperature: 90 °C Maximum heating pressure: 3 bar Maximum domestic hot water pressure: 8.6 bar Electrical supply: 230 V / 50 Hz Dry weight: approximately 628 kg Boiler currently disassembled. It was in operation before disassembly. Propane burner included. Some or all of the peripheral equipment from the previous installation may also be available: tank(s), circulators, valves, and piping components. To be discussed with the buyer based on their needs. Kdsdpoztz H Aofx Ah Ejt Nameplate available. Additional photos available upon request. Heavy equipment: transportation is the responsibility of the buyer. Possibility to discuss loading arrangements. Price: €7,500 excluding VAT, negotiable.

Condition: excellent (used), Year of construction: 2015, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Z000071400101, total width: 1,400 mm, total length: 2,050 mm, total height: 2,150 mm, type of input current: three-phase, overall weight: 1,100 kg, Powerful industrial blower suitable for a variety of applications. The stationary fan with a 600 mm diameter can be used for cooling, ventilation, heat dissipation, or for displacing water mist and dust. The unit has four rollers and forklift pockets for loading. Electric motor power (blower): 15 kW Kdodswbfm Sjpfx Ah Ejt Air flow rate: 33,000 m³/h Speed: 13.8 kW / 1470 rpm Electrical connection: 400 volts / 50 Hz / 32 amps Cable length: 5.0 m Pickup and inspection available in D-89188 Merklingen.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Ksdpjzw Ucxsfx Ah Eodt Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Ksdpfx Ahszw Ug Rs Eedt Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Van Aerzen blower GMA 10.0, 1.77 m3/min GLA 10.0, 3 m3/min GM3S, 2.82 m3/min See our other listings Kdjdpfx Aezcfd Ejh Eet VMA Wekerom

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 66422, pressure: 3.5 bar, 3 buffer tanks with a storage capacity of 2200 liters each, also available for individual sale. Kjdpfozllc Sox Ah Ejdt

Year of construction: 2026, condition: new, Aerzen GM 35S blower with a 55 kW motor, currently set to 600 mbar. Capacity: 34 m3/min. New, unused. Kdjdpfx Ajz Df Amjh Eot I have 2 units available.

Condition: ready for operation (used), Year of construction: 2021, Edgebander manufactured in 2021. This BIESSE Akron 1440 A features a feed speed of 12–18 m/min and can process panel thicknesses from 10 to 60 mm. It includes automatic edgeband feeding from rolls and strips, along with a pre-milling unit and various trimming units for enhanced finishing. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Kdjdpez Dwlmjfx Ah Est Technical specifications: • Feed speed: 12–18 m/min • Feed motor: 1.5 kW • Panel thickness: 10–60 mm • Edge thickness (from rolls): 0.4–3 mm • Edge thickness (from strips): 0.4–12 mm • Glue pot capacity: approx. 2 kg • Glue heating time: approx. 10 min • Power supply: 400 V / 50 Hz / 3 Ph + N • Control voltage: 24 V DC • Processed edgeband: approx. 737,000 mIntegrated configuration/equipment: • Automatic edgeband feeding from rolls and strips • NC-controlled automatic group adjustment • Automatic program selection and diagnostics • Production statistics and maintenance software • Antistatic spraying unit • Pre-milling unit with 2 × 1.8 kW HF motors • Glue application and pressure unit • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Radius scraping unit • Surface scraping unit • Textile polishing brushes • Cleaning liquid spray unit • Hot air blower Technical Specification Feed Speed 18 m/min

Condition: used, Convey grain, pellets, biomass, or other dry bulk materials pneumatically using a heavy-duty industrial fan, when lightweight extraction fans are insufficient. This Reitz Umwelttechnik fan was used for pneumatic material conveying in our own facility and is fully functional. It has a flow rate of approximately 9,600-10,000 m³/h, direct drive, and a 700 kg welded steel construction mounted on a mobile, liftable base frame. Nameplate photos and technical documentation are available; inspections are welcome. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited; loading this 700 kg unit must be scheduled. Best for: pneumatic conveying of dry bulk material, high-volume industrial ventilation, and process air where lightweight extraction fans are inadequate. Not suitable for: wet or sticky materials, air above 80°C, or applications requiring formal ATEX certification unless independently verified. What the specifications mean in practice: • 160-167 m³/min (~9,600-10,000 m³/h) - provides sufficient airflow to convey material through piping, not just extract dust. • 223-250 daPa total pressure increase - maintains material flow over distance and through bends. • Direct-driven 24.5/28 kW motor - eliminates the need to tension, align, or replace belts. • 700 kg welded steel housing, backward-curved impeller - designed for continuous industrial operation. • Mobile, liftable base frame - can be moved into position using a forklift or crane. Kdedpfxezx Ebzo Ah Eot • Max. 80°C, up to 3100 rpm - suitable for ambient and moderately warm process air. What you get: the complete fan unit with backward-curved impeller, motorenmaier 24.5/28 kW three-phase motor (IP55, 400/690V), and welded base frame, ready for connection. Note: the safety plate refers to explosion-protection instructions. If formal ATEX certification is relevant to your application, it should be independently verified. Technical data (from nameplate): Manufacturer: Reitz Umwelttechnik | Type: MSE 025-016030-00 | Serial/Year: 567856 / 2009 Volume flow: 160-167 m³/min (~9,600-10,000 m³/h) | Total pressure increase: 223-250 daPa | Shaft power: 8.7-11 kW Speed: 2915-2925 rpm (max. 3100) | Max. temperature: 80°C Drive motor: motorenmaier gmbh, Type 7AA160L-02V, 24.5/28kW, 2-pole, IP55, 400/690V | Weight: 700 kg Condition: Used, functional, previously used for pneumatic material conveying. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured in 2009 (serial 567856) by a reputable German manufacturer, used in our own facility, fully functional, and can be tested before pickup. Nameplate photos and technical documentation are available; in-person inspections are possible in Kerns OW by appointment. You can verify the identity, condition, and operation before making a purchase. Why buy now: this is a single, used machine, not stock – once sold, this specific configuration is no longer available; a 700 kg fan on a base frame is not an item we typically restock. First-buyer bonus: free loading with our forklift at no extra cost. Valid until September 9, 2026, or until sold. Action: please provide your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 570 kW (774.98 HP), overall weight: 4,000 kg, type of input current: three-phase, pressure: 6 bar, temperature: 120 °C, Equipment: documentation/manual, hot water, type plate available, Mobile oil-fired heating system in a 20-foot container – Buderus 570 kW / Weishaupt burner – Year of manufacture 2023 (can also be converted to gas operation) We are selling our mobile oil-fired heating system because we have switched to solar energy. This system served as an emergency or supplementary heating system for us, is 100% ready for operation and is sold as is – including stainless steel chimney, electrical distribution panel and complete interior fittings. Technical data: Boiler: Buderus Logano plus GE615, output 511–570 kW (rated output), max. 120 °C, 561 l water content, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year of manufacture 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected by Hensel main distribution panel (3x63 A) with CEE connections Container: 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney mounted externally, tensioning cables included Kdedpfey Sz Ruox Ah Eot Complete internal piping with insulation, circulation pumps, water treatment Flexible in terms of fuel: The Buderus GE615 is a condensing oil/gas boiler and can be converted to gas operation with a single adjustment (replacement or modification of the burner) – perfect for locations with a gas connection. Possible applications: Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g. as interim heating until the final heating system is commissioned), heating for large halls or for supplying hot water to larger projects. After connecting the piping or via hoses to the existing taps, it is immediately ready for operation. Procedure: The piping will be disconnected from the tap by us. Afterwards, the container can be picked up with a suitable truck (container transport) and set up at the new location. For commissioning (and possibly conversion to gas operation), we strongly recommend involving a qualified plumbing/heating specialist so that all settings on the boiler and burner can be made professionally. Original purchase price 2023: approx. 150,000 € Selling price: 65,000 € negotiable – serious offers are welcome, just write to us. Inspection possible at any time by appointment. If you have any questions, please do not hesitate to contact us!

Year of construction: 1992, condition: good (used), Industrial – Fan / Blower Manufacturer: DSD, Air Technology Division (now: Ferrostaal Air Technology GmbH) Type: DRMU 1000 R Year of manufacture: 1992 Volume flow rate: 35,000 m³/h Pressure: 6,500 Pa Ksdpfx Aogu Nyieh Ejdt Minimum speed: 2,035 rpm Maximum speed: 2,160 rpm Power: 75 kW Air density: 1.1222 kg/m³ Maximum temperature: 90 °C Original new price: approximately €35,000.00 / unit In very good condition!

Year of construction: 2007, condition: excellent (used), 1 radial fan with pre-shaft and cooling disc for hot and dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Volume flow: 71060 m³/h Pressure increase: 1673 Pascal at 250°C (0.637 kg/m³) Speed: 1460 rpm Kedpfjkvpfhox Ah Eedt Shaft power: 40.5 kW Weight: kg Year of manufacture: 2007 Insulation with rock wool and galvanized sheet metal. Dimensions: Length: 3250 mm Width: 2400 mm Height: 2000 mm Inlet diameter: 750 / 980 mm Shaft height without spring buffer: Outlet dimensions: 980 x 780 mm including compensator for the outlet side. No damage or wear. Only the color on the inside has faded due to the heat.

Condition: good (used), Year of construction: 1999, Kohlbach – Hydraulic discharge system with push rods 1. System description The two-beam hydraulic discharge system is used for the uniform and continuous discharge of wood chips from a rectangular fuel silo. The discharge shovels transport the material through alternating hydraulic lifting movements to feed the heating boiler, thereby ensuring a consistent fuel supply. 2. Main dimensions Silo length: Version with 6 discharge shovels: 7.50 m Width of shovels: 900 mm Shovel depth: 250 mm Shovel height: 70 mm 3. Drive and operating principle Hydraulic drive with 2 hydraulic cylinders Automatic, alternating lifting control, synchronized with the boiler control 4. Connections Material discharge into a central collection channel Further transport by means of a screw conveyor or chain conveyor Kdodpjzl Hqksfx Ah Eet Connection to the heating boiler: DN 315 5. Installation requirements Industrial floor in MONO-FINISH quality with a levelness tolerance of ±5 mm Foundation plates, ceiling openings and cladding to be carried out on site Sufficient service access for the hydraulic unit must be ensured 6. Advantages Reliable operation with wood chips of different grain sizes and qualities Consistent fuel feed for stable 24/7 continuous operation Low maintenance effort The system is dismantled and ready for loading onto the truck. The discharge system does not require special transport because: the discharge beams can be disassembled into 6.3 m long segments, the transport width is significantly below 4.24 m, as the beams are removed individually, the discharge shovels can be dismantled, transport with a standard semi-trailer is possible. Inspection in our warehouse in Szentendre/dismantled is possible after prior arrangement.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Kodpfszxqd Isx Ah Esdt Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Ksdpfx Ajyk Sgcsh Esdt