Used Bevel Gear Tester for sale (7,263)

Condition: used, The Modul KF 250 HSC bevel gear milling machine was designed as a universal machine for flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Fpsdpfxsxz Eg Aj Aalog Technical data: Gear diameter: 300 mm Max. module: 10 Tooth width: 60 mm Space required approx.: 4.2 x 2.6 x 2.2 m Machine weight approx.: 11,000 kg *The image shows the machine in its current condition as a used machine. Upon request, it can be offered partially modernised or as a complete retrofit, fully modernised with new CNC control (SIEMENS ONE).

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Fpedpfsxpq Nljx Aalsg Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Condition: used, Year of construction: 2006, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS Fedpfevxwr Aex Aalopg total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V

Condition: used, The Samputensili S 500 B bevel gear cutting machine was designed as a universal machine for flexible machining of gears and is used by manufacturers in gear and transmission technology for the milling of bevel gears. Technical data: Gear diameter: 500 mm Module – max.: 5 Tooth width: 100 mm Space requirement approx.: 4.5 x 3.2 x 2.4 m Machine weight approx.: 13,000 kg Fodpjxz Ef Sofx Aalopg *The illustration shows the machine in its current used condition. Upon request, it can be supplied partially modernised, or as a completely retrofitted and modernised machine with new CNC control (SIEMENS ONE).

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad Fpjdpevxwxcofx Aalsg speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Fpodpswn D Uhjfx Aaljg Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.

Condition: used, Year of construction: 2008, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Fsdpjvxwmtjfx Aalspg Internal probe Renishaw LP2 (axis X2;Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Fsdpfxjrvg N Do Aalopg Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Fodsrt Tpnspfx Aalepg Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET Fodeywcr Depfx Aaljpg PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Fjdpfxeywcrwj Aaljpg Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Fjdjwwrxajpfx Aalepg Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Fedpfowqr Tdox Aalspg Meter reading 48651 hours Operating system Fanuc L-64

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours Fpjdpfswqr Twsx Aalsg MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details. Fodewq Hp Tepfx Aalopg

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Fpsdpfx Ajwq Hqkjaljg Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2000, min. module 1 max. module 32 weight of the machine ca. 14,5 t Main technical data: Horizontal measuring range (rolling path X-axis) + 300 mm Smallest helix angle 0° / 90° Clamping diameter from spur gears to centers max. 2000 mm Wheel/outer diameter with rotating levelling table 250 - 2000 mm Largest permissible test wheel weight approx. 10,000 kg Vertical measuring path (Z-axis) 1200 mm Center distance 200 - 2000 mm Operating voltage 0.85 - 1.15 of the nominal voltage Fedpfx Aoy Nd Taoalopg Total machine connection 2 kVa Compressed air connection 6 - 8 bar

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA Fodpfjtmrkrox Aalopg - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Lenze, adjustable geared motor with brake -Adjustment gear: 11.432.10.08.1 54 - 11 rpm -Brake: 14.448.08.1.0.8 8 Nm -Motor: Type B7KB4-044H 0.25 kW / 1390 rpm -Shaft: Ø 20 x 40 mm Fodpettimbefx Aalepg -Design: B3 -Number: 3x geared motors available -Price: per piece -Dimensions: 410/280/H200 mm -Weight: 16.7 kg/pc.

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm Fpjdpsv Dtmmjfx Aalsg -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Fjdoy N D E Aepfx Aaljpg Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1x Pfauter PE150 milling head, serial number 27364 Fedpfsy N Df Ajx Aaljpg 1x Pfauter P210L milling head, serial number 29013 Both milling heads are brand new and unused. Available for immediate delivery.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 18 rpm -Power: 0.37 kW -Design: B5 angle -Shaft diameter: 35 mm Fodpfx Aaschbvyolepg -Protection class: IP 54 Quantity: 1 piece available -Dimensions: 490/261/H300 mm -Weight: 38 kg

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 total power requirement: 45 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Fsdpsy Nk Idefx Aalepg Without automation *

Condition: used, Year of construction: 1985, Technical details: max. wheel diameter: 780 mm gear width: 130 mm max. module: 10 weight of the machine ca.: 8,5 t no. of strokes: 30 Hub/min Hier fully functional machine, Little used There are some Tools and Change gears Liebherr WSC501 CNC gear shaping machine, used, ready for use Manufacturer: Liebherr Type: WSC 501 Fpedpfx Aajy Nk H Holog Mach.- No.: 4407/05 Year of manufacture: 1985 Details: Max. gear shaping module: 8mm (30°gears possible up to module 10°) Max. gear width: 130mm Diameter of the machine table: 500mm Maximum wheel diameter: 780mm Shut height – table: 650mm Stroke rate min. 30DH/min Continuously adjustable max. 1500 DH/min. Operating voltage: 380V Frequency: 50Hz Control voltage: 110V Connected load: 36 kVA Rated current: 55A Weight: 8500kg Dimensions: approx. 4,85 x 3,655 x 3,78 (width x depth x height in m) The machine has seen only very limited use in our company. It remains fully operational and can be demonstrated in function upon appointment. Comprehensive documentation is also available The machine is particularly suitable for: ? Internal and external gearing in small batch sizes ? Internal gears in blind holes (non-through bores) ? External gears without run-out, where hobbing would not be possible Typical workpieces include: internal gear rings for planetary gear systems, drive shafts, coupling hubs, and more. Attractive Offer – Liebherr WSC501 CNC Gear Shaping Machine ????? ? ISO 9001 + EN 9100 Certified ? Excellent opportunity to acquire a robust German-made gear shaping machine ? Fully operational, with very limited usage history ? Demonstration possible upon appointment Highlights: - Suitable for internal and external gear shaping in small to medium batch sizes - Unique capability for internal gears in blind holes - Ideal for external gears without run-out, where hobbing would not be possible - Applications: planetary gear rings, drive shafts, coupling hubs, and more ????? Benefit: Save costs compared to new machines while still relying on Liebherr quality. Interested? Contact us today to arrange a viewing or request further technical details. *