Used Bending Device for sale (15,565)

Condition: used, Year of construction: 2007, Bending length 3050 mm Max. prebending capacity 13 mm Max. rolling capacity 16 mm Top roll dia. 340 mm Isdpexhgqiefx Afiotn Lower roll dia. 340 mm Side rolls dia. 240 mm 4-rolls Fully hydraulic Hydraulic drop end Digital read out of roll positions Equipped with: Top support Side support

Year of construction: 2020, condition: used, For sale: Automatic 2D Wire Bending Machine WL-YZ-8K Designed for processing soft wire with a diameter of 3–8 mm and hard wire of 3–6 mm. Key benefits of the machine: Iodpfxjxapv So Afiotn Technical specifications: - 4 axes - Total machine power: 7 kW - Maximum wire feed speed: 60 m/min - Maximum wire feeding deviation (depending on material): ±0.2 mm - Supplied with a wire coil decoiler (coil weight up to 350 kg) - Includes a complete set of parts for processing wire diameters: 3, 4, 5, 6, 7, and 8 mm - Model: WL-YZ-8K - Manufacturer: Hwashi

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm Iodpfxexhfbtj Afijtn MACHINE DETAILS Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. Itjdpfsxmf Svjx Afien +FITTINGS+AIR/PRODUCT HOSE

Year of construction: 2016, operating hours: 1,234 h, condition: good (used), functionality: fully functional, The Flexiheffer uses a pneumatic cylinder to make loads of up to 250 kg weightless and has a reach with a 4-meter radius around the column (500 mm diameter). Ideal for loading machinery. Price includes the 4-meter high column. Itedpfx Aoxmf Rxefion

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, Vacuuming Plastic Granulate R104 X Product Number: 4031600006 Iodpfx Aew D Upzefistn The industrial vacuum cleaners of the R-series are designed to extract production offcuts, cutting dust, and all types of manufacturing waste (such as plastics, paper fragments, or fabric scraps), while also compacting the collected material to facilitate its reintegration into the recycling loop. Originates from a cleanroom production: plastic granulate Industrial vacuum cleaner for compressible materials The R-series industrial vacuum cleaners are designed to extract production offcuts, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric pieces), compacting them to allow for efficient recycling. • Reduced downtime through continuous cleaning • Compaction and easy removal of collected material • Dust extraction for working environments • Return of offcut material into the process • Flexible power options to suit various requirements • Maintenance-free container sizes • Simple monitoring • Unattended operation possible I purchase all machines and peripheral devices directly from the customer at a fair price. The subsequent sales price is reasonably calculated so that all three parties – the seller, the buyer, and myself as the intermediary – benefit from a fair and equitable transaction. Unrealistic purchase offers from various used machinery dealers are, therefore, not welcome.

Condition: used, Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Itedpjxmb Rhjfx Afijn Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Measuring Device: Penetration Hygrometer with Foldable Sensor This handy device with a foldable sensor is proven in practice and widely used in the paper industry. It measures relative humidity and temperature, displaying the results directly on the screen. Applications: Moisture measurement in paper and cardboard stacks, ideal for paper technicians and printers. Iodpfx Afjxmab Sjijtn The Rotronic S1 Hygrometer is a reliable penetration hygrometer for measuring air humidity. Its robust design makes it ideal for use in industrial and craft environments. The device is in good condition and ready for use. The hygrometer is manufactured by Rotronic, a renowned Swiss maker of measuring and monitoring instruments. With this penetration hygrometer, you can precisely measure humidity in a variety of environments. The Rotronic S1 is an essential tool for anyone concerned with indoor air quality.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: Ijdpfxsxg Hrko Afiotn - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Iedpfx Afjxl Up Uoijtn

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm Iodpfju Ibvhex Afijtn tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: used, functionality: fully functional, SCHUNK GFT-X270 Clamping Force Measuring Device & M3 Measuring Head Gripping Force: - Handheld device GFT-X - Power supply via USB, 5V - Measuring range/clamping force F - Display in kN or lbf – switchable, - Graphical bar display in %, where 0....80% green, 80....95% yellow, 95...100% of measuring range in red - Measuring range/rotational speed rpm, display in 1/min (can be switched on/off) - Dimensions 220x100x50mm - Weight 460g - PC/Laptop interface USB 2.0 - Interface/charging cable 1.5m - Measuring head charging cable 1m Itjdpfxsw Eb Nqo Afion - Receiving frequency 433.92 MHz - Measuring head M3 - Power supply internal energy storage - Energy storage capacity approx. 1.5 h at 50% duty cycle - Measuring range/clamping force F 0...180kN (2-jaw) / 0...270kN (3-jaw) - Measuring range/rotational speed rpm up to

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic profile bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-07-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Included: Brake motor Push-button control Digital readout 1 extra set of rolls for tube Ø 48 and Ø 42 mm Dutch-language manual Price for the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has been used very little! Delivery conditions: Delivery time: available from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Itodpfexl Sq Aex Afion Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: new, sheet thickness: 45bending length: 2600upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Ijdsd Ab Rhjpfx Afistn Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies Iodpfov Ikvgsx Afistn 9) +/-0.01mm parallelism accuracies

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, Equipment: type plate available, ConturoMatic CV120 Contour Measuring Instrument "simply measure contours" Ask us about our leasing options as well—we are happy to put you in touch with our partner. ✅ Up to 30% declining-balance depreciation on movable assets* ✅ Valid for investments from July 2025* ✅ T&S products are fully eligible for funding* Ijdpfx Aoq Nzd Nefistn Contour measuring system with feed unit and motorized Z-column Scope of delivery: - CV120 motorized feed unit with precision guide - External control and regulation unit - Motorized Z-column - Desktop evaluation computer, Windows 11/64 Bit - 24" TFT monitor - ConturoMatic evaluation software; operating manual - Cable set - FREE CM software updates!!! - Replacement 33mm probe CS42 included at no charge Technical Data CV120: Feed unit (X/Z measuring axes) - Z measuring range: 30mm - X measuring range: 120mm - Measuring speed: 0.1–1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe arm lift-off function Z-column - Positioning range: 320mm, motorized Accuracy: X-axis: +/-(1.2µm+2Lx/25)µm* [L=mm] Z-axis: +/-(1.8µm+2Lz/25)µm* [L=mm] Note: To adapt our CV120 to your specific measuring tasks and to expand the system, various optional accessories are available, such as different probe arms, universal clamping fixtures, or customer-specific workpiece holders. * according to specification T&S/CV120 -Technical changes reserved- Customs tariff number: 90318020 -2 year warranty- Photos may show special accessories not included in the standard scope of delivery. *For legal reasons, we are not permitted to provide legal or tax advice on this topic; the information above should not be considered as such. Please consult your relevant contacts (specialist department or tax advisor) if in doubt.

Condition: used, Year of construction: 2020, Description: Filter system for oil, water, and emulsions Manufacturer: Polo Filter-Technik Bremen GmbH Type/Model: SBH-C6.0 Year of manufacture: 2020 Order No.: AB194013 Technical specifications of the filter system: Capacity: V1 = 2,400 l, V2 = 17,000 l Empty weight: approx. 8,800 kg Maximum operating temperature: 60 °C Flow rate: approx. 2,200 l/min Maximum operating pressure: Non-pressurized Control: Control cabinet with display and control panel Additional system: Immersion chiller Manufacturer: Haosch / ATF Cooling GmbH Itjdpoxgp N Sjfx Afion Type / Model: MCS-1200S-010PS3UZ1-3405C Cooling capacity: 120.0 kW Connected load: 41.0 kW Rated current: 69.5 A Refrigerant: R407C, 17.0 kg × 2 Design: 3PH+PE / AC 400V / 50Hz Dimensions (W x D x H): 1,400 × 3,300 × 2,180 mm Weight: 1,412.5 kg Machine no.: C2020068

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories Iedpov I Tdgjfx Afijtn # 7044

Year of construction: 2024, condition: new, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam Ijdsq Sz Ahjpfx Afietn - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: new, bending length: 2050sheet thickness: 3upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel Iedpfxsd Ab N Ao Afistn - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.260,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.136,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: good (used), age unknown imprinting unit Itedpfxsq D Aaxs Afien numbering device suitable for GTO 46 4 numbering boxes, 7 digits, forward Delivery time: immediately from stock

Condition: refurbished (used), functionality: fully functional, Year of construction: 2006, control type: PLC-controlled, degree of automation: semi-automatic, pipe diameter (max.): 60 mm, mandrel length: 6,000 mm, year of last overhaul: 2025, Equipment: CE marking, emergency stop, Mandrel Bending Machine S6006 ----- For producing dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 60.3 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60.3 x 2.6 mm (stainless steel) → Total connected load 5 kW → Tube feed length 6 m Robust and durable steel construction with a force-locked design—no torsion-prone structure such as a separated construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control system's touch display enables easy and intuitive programming and operation of the machine. After the tube is loaded, it is fixed by a chuck on the carriage. This ensures precise positioning of the tube, allowing the creation of dimensionally accurate geometries. Standard equipment also includes geometry verification before the bending process: If the bending process is started from the wrong position, the machine will not allow it. This prevents incorrect operation. Optional additional features offer more convenience and increase output and thus the efficiency of the system. Data transfer from the optional TBS-3D tube calculation software (PC version) is done via USB stick or via FTP access from the computer to the machine control. USB or LAN connector (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Isdpfxjw Sr Ucj Afijtn Standard equipment: → Electromechanical drive for bending axis 2.2 kW → Rotation speed 2.9 rpm (=17°/s) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1 mm → Electronic torsion measurement ±0.1° → Manual stop system (length overtravel stops) → Manual indexing system (15° increments for torsion) → Three-jaw chuck to clamp the tube in the carriage → External control panel PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. The control system calculates the feed and bending angle directly after entering length and angle values. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + torsion) → Mobile version (with castors) → Radius extension Sample image shows a similar machine

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec tank capacity 80 l Ijdpfx Ajgvkigefietn Pressure power 320 bar total power requirement 5,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) Itodpottah Rsfx Afijn → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Itodpfx Afsgvkmrjien Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.