Used Beer Tank 500 Litre for sale (46,605)

Condition: used, tank capacity: 5,000 l, GENERAL Design: upright Remarks: Manhole approx. 320 x 415 mm; some former connections from the previous operator have been welded shut; cylinder wall thickness lower segment: 2.5 mm Internal diameter: 1,490 mm Total height: 4,050 mm Type of stand: feet Location: Bremen Volume: 5,000 liters Cylinder wall thickness: 2.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,750 mm Last known use: cleaning agents TANK Number of feet: 3 pieces EQUIPMENT Manhole / dome: in the cylinder Outlet (alternative input): 50 mm Note: slight residues present MATERIAL PROPERTIES Outer surface: marbled finish Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Kdjdpfxoxqcb Ns Ag Aow Bottom wall thickness: 2.5 mm

Condition: used, Year of construction: 1990, functionality: fully functional, total height: 2,200 mm, total width: 2,000 mm, total length: 3,500 mm, tank capacity: 6,500 l, TECHNICAL SPECIFICATIONS - Horizontal cylindrical tank on legs - Model: Rotomatic - Capacity: 6,500 litres - Brand: 3C - Year: 1990 - Material: 316L stainless steel Front: - 1 hatch 530×440 + DN 40 decanter elbow + MÂCON threaded ball valve - 1 clear draw + DN 40 butterfly valve with MÂCON threaded end Ksdjxrzqfspfx Ag Ajdw - 1 thermometer - 1 pipe + 20/27 GAS threaded end for nitrogen supply - 1 level gauge with tap and return - 1 taster - 2 15/21 GAS sleeves - 1 nitrogen tap connection - 1 cable-operated control box for forward/reverse operation On top: - 1 hatch, diameter 300 mm On the ring: - 1 cooling circuit - Circuit inlets and outlets, 40×49 GAS threaded ends, brought to the rear General equipment: - 1 2CV gear motor, 60 Hz - Arms + propellers - 1 filter grille - 1 power cabinet at the front DIMENSIONS - Width: 2000 mm - Length: 3500 mm - Total height: 2200 mm

Condition: good (used), Item: D-6722-Tank3000 Kdedpfx Ash Hrg Reg Asw Horizontal Tank, capacity 3.500 L, insulated, manhole at top, stainless steel tank AISI 304. (no agitator)

Condition: refurbished (used), 100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm Weight: approx. 16.300 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - bituminous coating on the outside for protection - Upon request, we can provide the tank with a full interior coating on bitumen basis or epoxy resin interior coating (against corrosion) Kdedpshh Suhsfx Ag Aow - It is also possible to line the tank with a with a plastic inner cover A cost-effective delivery with our own truck is possible. Just tell us the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment.

Condition: used, Year of construction: 1979, functionality: limited functionality, machine/vehicle number: 9375/1, overall weight: 3,500 kg, total length: 4,200 mm, total width: 2,300 mm, total height: 2,500 mm, 2x horizontal storage tank 14,500 liters. Possible external leak in the cooling jacket. The storage tank itself is OK. External insulation jacket is damaged. Kdodpfsxpffbex Ag Aow

Year of construction: 2023, condition: used, functionality: fully functional, The item for sale is an unused stainless acid-resistant steel tank with a capacity of 85,000 liters, equipped with a mixer. Kdedpfsxnm I Ijx Ag Aow

Condition: used, tank capacity: 3,500 l, GENERAL Design: vertical Remarks: Manhole cover flange made of Fe; one former connection in the lower bottom each welded shut Internal diameter: 1,590 mm Total height: 2,400 mm Base design: feet Location: Bremen Volume: 3,500 litres Product contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,450 mm Last intended use: spirits VESSEL Number of feet: 4 pcs EQUIPMENT Manhole / dome: in upper head (DN 400) Outlet: DN32 DIN 11851 MATERIAL SPECIFICATION Outer surface: marbled Kdsdpsxqcbijfx Ag Asw Feet material: steel

Condition: used, functionality: fully functional, total height: 4,204 mm, tank capacity: 14,500 l, inner diameter: 3,226 mm, TECHNICAL SPECIFICATIONS - Manufacturer: SERAP - Year: 2019 - Insulated, truncated cone-shaped 304 stainless steel tank - Interior tank with sheet metal finish: Bright Annealed (2R) - Exterior tank with sheet metal finish: -- Dome: 320 grit polished -- Shell: fine grit circular polishing + ‘Scotch Brite’ finish -- Bottom: Cold rolled (2B) - Heat exchanger characteristics: -- Connection: Ø20x27 female -- Test pressure: 10 bar -- Maximum operating pressure: 6 bar -- Exchange surface area: 10.0 m² - Maximum operating pressure in the tank: -0.002 / +0.05 bar - Insulation: polyurethane foam injected onto the ferrule, base and dome Roof - Central chimney with round door Ø900, frame height 100 mm with hinge - Chimney with articulated safety grille Ø1000 with shutters - Chimney with oxygenation nozzle - M 20x27 Gas end piece + F/F valve - DN50 pressure and vacuum valve Kdedpfx Agjwvu Nre Aow Ring - Pump discharge column - MAC73 valve kit on MAC43 connection and outlet - MAC 43 pap valve kit + removable CD DN 40 - AIS 410X530 4L SS CAD+ACC rectangular door - MAC43 tasting tap with cannula Bottom - Removable filter bottom in 6 parts - ‘Euroslot’ type maceration grid - INOXPA RV65 refill pump - 150 HL/H Other - Pump control panel DIMENSIONS - Height: 4204 mm - Diameter: 3226 mm

Condition: new, functionality: fully functional, power: 330.97 kW (449.99 HP), axle configuration: 6x6, fuel: diesel, gearing type: automatic, Year of construction: 2025, Equipment: air conditioning, all wheel drive, differential lock, trailer coupling, From our new vehicle range, we offer you: Large Tank Firefighting Vehicle GTLF 9500-Crew 6x6 All-Wheel Drive on Off-Road SCANIA P450 XT Chassis Challenging operations require high-quality and powerful equipment. Our GTLF 6x6 on Scania reliably and swiftly transports personnel, equipment, and large quantities of extinguishing agents to the scene. Chassis: • SCANIA P450 XT 6x6 EURO 6 with 450 HP (331 kW) and automatic transmission • Off-road tires, both rear axles with twin tires for high driving stability • Front winch available upon request Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Standard 4 SCBA holders in crew compartment • Air conditioning and auxiliary heating Superstructure: • High-quality, frame construction made from rust- and corrosion-free materials • Folding steps for each side compartment • Custom-designed stainless steel equipment storage per your requirements • Walkable, anti-slip vehicle roof • Ladder mount, optionally with removal aid Fire Pump/Agent Tanks: • Maintenance-free combined low pressure pump FPN 6000-10 • Pump & Roll capable • Output 6,000 l/min at 10 bar • Integrated, infinitely adjustable foam proportioning system • Water tank 9,500 l with integrated foam agent tank 950 l • Additional heater in pump compartment Firefighting Equipment: • Rapid attack reel with 60 m rigid hose • Foam/water turret 3,600 l/min roof-mounted, remote controlled option available • Additional front turret available • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: • LED lightbar on the vehicle roof • LED front flashers • Pneumatic special signaling system • 100 W loudspeaker system with announcement unit • Rear view camera • Extensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and auxiliary spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request Pictures show a similar customer vehicle with optional equipment in some cases. We are happy to provide you with a detailed offer and introduce the vehicle to you comprehensively. All details provided to the best of our knowledge, without guarantee of completeness or correctness. This ad is not a binding offer, but for information purposes only. Subject to prior sale! Kjdpoxh Dvpofx Ag Asdw

Condition: used, mileage: 852,500 km, power: 368 kW (500.34 HP), first registration: 11/2016, fuel type: diesel, color: other, axle configuration: 6x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, differential lock, parking heater, retarder, trailer coupling, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - Disc brakes - Electric windows - Fog lights - Gullet - Immobilizer - I shift - Lift Axle - Power steering - Radio CD player - Sleeping cabin - Toolbox = Remarks = Structure Volume: 22.1 m3 Material: Aluminium Volvo FH 500, 12-2016, Euro 6, Retarder, 6x2, ROHR 22150 Liter fuel tank, 4 Compartments, ADR = More information = Front axle: Steering Kdjdpjwrt A Aofx Ag Asw Rear axle 1: Double wheels; Differential lock; Alloy wheels Rear axle 2: Alloy wheels; Lift axle; Steering Make of bodywork: ROHR Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Year of construction: 1996, condition: used, functionality: unexamined, Used Schwaben Liquid Silo – Tank 5000 Liters Connections for cooling/heating water (external) for circulation via internal copper piping Manufacturer: Schwaben Kunststoff GmbH Kedpfxoxiwi Ej Ag Aedw Material: PE-HD Plastic Max volume: 5.0 m³ Manufactured: 1996 Cylinder height: 3000 mm

Condition: good (used), Item: D-2414-Tank500 Stainless Steel transport tank. Single skin, CIP connection Lid Ø 400 mm Dia. Ø950 mm Total H 1500 mm Kdjdpfxoh E Dp Us Ag Ajw Outlet 2"

Condition: used, tank capacity: 25,000 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Pressure tested + 4 Bar Internal diameter: 2,600 mm Total height: 5,900 mm Support type: Feet Location: Outdoor storage (57234 Wilnsdorf) Technical documentation: Drawing, various documents Nameplate: Volume: 25,000 liters Cylinder wall thickness: 6 mm Product contact material: V2A 1.4301 (AISI 304) Condition: Used Last application: Pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 50 °C Number of feet: 3 pcs EQUIPMENT Manhole / Dome: in cylinder, in top head Ksdpfx Agexqb Ubj Ajdw Outlet: present Note: Manhole cover plated MATERIAL SPECIFICATION Material feet: Steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 6.9 mm

Condition: used, Year of construction: 1990, functionality: fully functional, total height: 11,000 mm, total width: 4,000 mm, tank capacity: 166,500 l, TECHNICAL SPECIFICATIONS - Flat bottom tank - Brand: CSC - Material: stainless steel - Capacity: 166,500 litres - Interior finish: 2B - Exterior finish: Brushed ROOF - Lifting rings - 1 central chimney with 500 mm stainless steel hatch with clamping arm - 1 safety valve RING - 1 DN70 filling pipe with valve - 1 oval stainless steel autoclave door 310×420 mm - 1 DN70 stainless steel ball drain valve with sludge trap - 1 level gauge Kedpjxnwnfjfx Ag Asdw BOTTOM - Flat - 1 DN70 stainless steel butterfly drain valve - 1 DN50 stainless steel butterfly drain valve with decanter elbow - 6 fixing brackets for base plate DIMENSIONS - Diameter: 4000 mm - Height: 11000 mm

Condition: refurbished (used), 60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ length: approx. 12.680 mm diameter: approx. 2.500 mm Weight: approx. 9.500 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection Kjdshh Sruspfx Ag Ajdw - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Outside provided with a bitumen coating for protection - On request we can provide the tank with a full interior coating on a bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a plastic inner cover lining A cost-effective delivery with our own truck is possible. Just tell us the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time by prior appointment

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: 2 tanks (6169-3+5) with broken intermediate flange at the gearbox Speed: 26 - 101 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-protected (compliance with applicable ATEX regulations on site must be checked) Overall height: 4,200 mm Heating/Cooling: Available Power: 6.8 kW Max. admissible operating temperature: 60 °C Max. admissible operating overpressure: 10.0 bar Seal type: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Base type: Ring Location: Bremen Technical documentation: Drawing, TÜV papers Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Double jacket volume: 98.0 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4541 (AISI 304) Product contact material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 1,750 mm Previous application: Chemical industry TANK Max. operating temperature / °C: 60 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manhole/Dome: In top head Outlet: Flange DN80 Note: Slight residues MATERIAL SPECIFICATION Material of feet: Steel Kdodpfxoxqbuhe Ag Asw AGITATOR Manufacturer: Ekato Voltage: 380/660 Volt Interference suppressor: Agitator arrangement: Centrally in top head TECHNICAL DATA / DIMENSIONS Bottom thickness: 5.4 mm Top head thickness: 9.0 mm

Condition: used, functionality: fully functional, total height: 4,000 mm, operating pressure: 1 bar, tank capacity: 10,500 l, warranty duration: 6 months, inner diameter: 2,100 mm, TECHNICAL SPECIFICATIONS - Cylindrical, closed, on legs - Capacity: 105 HL - Material: STAINLESS STEEL - Bottom: conical, on legs - Tank numbers: 23 and 22 ROOF - 1 off-centre chimney at the front Ø 400 mm RING - 1 ladder support bar - 1 level tube on ruler - 1 tasting tap - 1 rectangular door 500/400 mm at the bottom of the ring - 1 partial drain ball valve * Tank No. 23: Ø 50 MÂCON with plug * Tank No. 22: Ø 60 MÂCON with plug BOTTOM - 1 total drain ball valve * Tank No. 23: Ø 50 MÂCON with plug * Tank No. 22: Ø 60 MÂCON with cap - 5 stainless steel feet: height 470 mm DIMENSIONS - Diameter: 2100 mm - Total height: 4000 mm Kdjdpfjw Uqzmsx Ag Asw APPENDICES - Tank for product density 1 - Conditions of use: atmospheric pressure - 6-month warranty - Complies with CE standards

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: 3 claws made of V2A Speed: 61 rpm Inner diameter: 2,100 mm Total height: 5,500 mm Power: 22 kW Agitator: Beam agitator Stand type: Claw feet Location: Bremen Nameplate: Volume: 8,000 liters Cylinder wall thickness: 6 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 2,500 mm Last application: Chemicals EQUIPMENT Manhole/Dome: In the top head Outlet: Flange DN100 Note: Light residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 Volt Agitator arrangement: Centrally on the top head Kdsdpoxqbrmjfx Ag Aow TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 8 mm

Condition: used, Year of construction: 2000, tank capacity: 6,779 l, GENERAL Design: suspended Year of manufacture: 2000 Remarks: Support ring made of Fe Speed: 114 rpm Inner diameter: 1,800 mm Total height: 4,550 mm Power: 37 kW Agitator: beam agitator Base type: ring cut off Location: Bremen Name plate: Volume: 6,779 liters Ksdpfx Agjxqbp Ss Aodw Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,200 mm Last use: chemical industry EQUIPMENT Manhole/dome: on top head Outlet: flange DN100 Note: light residues, manhole cover missing AGITATOR Agitator manufacturer: Fluid Voltage: 400/690 Volt Agitator arrangement: centrally mounted in top head

Condition: used, tank capacity: 7,500 l, GENERAL Construction: upright Speed: 102 rpm Internal diameter: 1,800 mm Total height: 4,650 mm Power: 2.2 kW Agitator: bucket agitator Support type: feet Location: Bremen Nameplate: Volume: 7,500 liters Cylinder wall thickness: 2 mm Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Previous application: paint industry TANK Number of feet: 3 pcs EQUIPMENT Manway / Dome: in cylinder Outlet: DN50 DIN 11851 Note: slight adhesions Kedpfx Agoxqbprs Ajdw AGITATOR Agitator manufacturer: Inotec GmbH Voltage: 230/400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2 mm

Condition: used, tank capacity: 17,200 l, GENERAL Design: vertical Remarks: Some outlets partially cut off; 1 vessel (internal no. 7083-2) has 1 dent in the cylinder Speed: 47 / 95 rpm Internal diameter: 2,508 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 6,000 mm Power: 17 / 27 kW Agitator: Paddle agitator Mounting type: feet Location: Bremen Technical documentation: Drawing, TÜV certificates Kjdpjxqbmkofx Ag Asdw Nameplate: Volume: 17,200 liters Wall thickness, cylinder: 4.0 mm Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,750 mm Last application: paint industry VESSEL Max. operating temperature vessel / °C: 100 °C Specific weight of medium (to/m³): 1.2 (to/m³) Number of feet: 4 pcs EQUIPMENT Manhole / dome: on top head (DN 600), handhole Outlet (alternative entry): 50 mm Note: minor residues MATERIAL SPECIFICATION Material of feet: steel AGITATOR Voltage: 400 volts Agitator location: centrally on the top head TECHNICAL DATA / DIMENSIONS Wall thickness, bottom: 3.5 mm Wall thickness, top head: 4.0 mm

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole diameter approx. 390 mm Speed: 1460 rpm Internal diameter: 1,600 mm Total height: 4,350 mm Power: 15 kW Agitator: Jet mixer Stand type: Height-adjustable feet Location: Bremen Volume: 5,500 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,500 mm Last use: Lubricant production TANK Number of feet: 3 pcs EQUIPMENT Manhole / inspection opening: in top head Outlet: present Note: slight residues MATERIAL QUALITY Feet material: Stainless steel AGITATOR Agitator manufacturer: Fluid Voltage: 380 Volt Agitator arrangement: eccentric in top head Kdodsxqbi Sopfx Ag Asw

Condition: used, tank capacity: 4,500 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Dimple jacket only in lower cylinder area Speed: 1,445 rpm Inner diameter: 1,500 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 4,550 mm Heating/Cooling: Present Power: 5.5 kW Max. permissible operating overpressure: 6.0 bar Agitator: Inclined blade agitator Support type: Feet Location: Bremen Cylinder temperature control: Dimple jacket Nameplate: Volume: 4,500 liters Product-contacting material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,390 mm Previous use: Chemical industry Kodpfsxqbilox Ag Aedw VESSEL Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: Dimple jacket EQUIPMENT Manhole / Dome: In cylinder Outlet (alternative specification): 55 mm Note: Light residues inside MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Foot material: Stainless steel AGITATOR Voltage: 400 V Interference suppressor: Agitator arrangement: Centrally mounted on tank top

Condition: used, tank capacity: 3,500 l, GENERAL Features: Crane lugs Design: Vertical Remarks: Armaflex insulation on the lid and upper cylinder area (see photos) Speed: 395 rpm Outer diameter: 1,660 mm Inner diameter: 1,580 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 4,550 mm Heating/Cooling: Available Power: 6.8 kW Max. permitted operating temperature: 15 °C Max. permitted operating overpressure: 4.0 bar Max. overpressure: 4.00 bar Mechanical seal: Mechanical seal with thermosyphon vessel Agitator: Propeller Support design: Feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.00 bar Volume: 3,500 litres Double jacket volume: 320.0 litres Product-contact material: V2A 1.4541 (AISI321) Condition: Used Cylindrical height: 1,700 mm Last application: Chemical industry TANK Max. tank operating temperature / °C: 120 °C Number of feet: 4 pcs HEATING/COOLING JACKET Base temperature control: Double jacket FEATURES Outlet: Flange DN50 Note: minor residue MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4541 (AISI304) Feet material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 volts Kodpfexqa Uysx Ag Asdw Agitator arrangement: Eccentric, top-mounted Agitator features: Protective cover above motor hood is bent

Condition: used, tank capacity: 1,500 l, GENERAL Features: Evacuation/Aeration, butterfly valve Design: vertical Remarks: Height-adjustable cap screws for the feet are missing; hand lever for the butterfly valve is missing; manway cover is not suitable for an operating pressure of 2 bar (the tank was most likely operated unpressurized by the previous owner and thus the cover was replaced accordingly) Outer diameter: 1,300 mm Inner diameter: 1,150 mm Total height: 2,700 mm Heating/Cooling: present Insulation: present Max. permissible operating temperature: 20 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.0 bar Agitator: agitator flange Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 1,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,550 mm Last application: dairy TANK Max. operating temperature tank / °C: 120 °C Bottom: flat bottom with slope Number of feet: 3 units HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Manway / dome: on top (Ø 430) Outlet: DN65 DIN 11851 Note: dents on the insulation jacket, functionality of the double jacket not tested MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel Kdodpfsxqa Itsx Ag Aew AGITATOR Agitator arrangement: off-centre on top