Used Band Sawmill In Vietnam for sale (18,380)

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Coolant tank 150 l Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Nodozq S Ncspfx Ahkoda Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Material support height 700 mm

Condition: used, used good condition low mileage Manufacturer: Gewema Type: 600 B Machine No.: 2223 upper guide lower guide brake, mechanical table tiltable mobile Motor kW: 2.2 Wheel diameter mm: 600 Blade length mm: 4550 Cutting height approx. mm: 560 Dust extraction connection mm: 85 Space required approx. L x W x H mm: 1200x600x2200 Weight approx. kg: 280 Total connection value approx. kW: 2.2 Location: 97447 Gerolzhofen, free loading, unpacked Nodpfxszrpxkj Ahkeda Handover in the current condition as inspected, without warranty

Condition: used, machine/vehicle number: A-IC1397, Year of construction: 2019, operating hours: 5,567 h, load capacity: 1,600 kg, lifting height: 3,360 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, fork length: 1,150 mm, 5185762 Serial Number: 516221V01824 Ndjdpfxszd Ivrs Ahksa Internationaler Transport möglich/ International delivery available

Condition: used, empty load weight: 6,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 03/2001, suspension: air, tire size: 385/65 R22.5, trailer brake: trailer braked, Year of construction: 2001, Equipment: ABS, BENALU – approx. 55 m³ – Full Aluminum ((3 units in stock)) - Volume: approx. 55 m³ - Portal doors and grain discharge chute - Aluminum chassis - Aluminum body - ABS - BPW axles - Lift axle - Drum brakes - Air suspension - Roll tarp Nedsztk Ntspfx Ahksda - Standing platform on the front wall - Aluminum rims - Tool box - Spare wheel holder - Tire size: 385/65 R22.5 Tread depth approx. 50-80% - etc. ….. For more information: Mobile phone: +43 664 4477030 ..:: Please contact us before your visit; the office is not always staffed ::.. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will take care of all customs matters for you. What to do with your used vehicle? If we reach an agreement, we will gladly accept it as a trade-in. This offer is non-binding and subject to change. Errors and prior sale excepted.

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, overall weight: 20,000 kg, saw drive: 55,000 W, Equipment: cabin, documentation/manual, We offer this untested Primultini 1300 complete sawmill (stationary), manufactured in 1989. Manufacturer: Primultini Ndjdpfx Aheztk Atjkja Model: 1300 Year of manufacture: 1989 Condition: untested Category ID: 1389 Type ID: 415 Machine type: Complete sawmill (stationary) Description: Due to changes in plans, I am selling a used Primultini 1300 sawing system with extensive conveying technology. Technical data & equipment: Power: 55 kW Hydraulic carriage Infeed log conveyor Outfeed lumber conveyor 2 transverse conveyors Primultini sharpening system The system is robustly constructed and suitable for professional use in wood processing. The system has been dismantled and is stored in a warehouse. Inspection is possible by appointment. If you have any questions or need more information, please send us a message or call us.

Condition: good (used), machine/vehicle number: Stenner Resaw Bandrack, functionality: fully functional, total height: 2,350 mm, total length: 5,410 mm, total width: 1,700 mm, table height: 1,100 mm, Equipment: motor brake, Good working condition and ready to use. Solid, reliable machine ideal for sawmill. Please get in touch via my mobile, if you require any further information or would like to arrange a viewing. Njdpezrpaujfx Ahkjda Can be seen working or please view it on the YouTube Link

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). Ndjdpfx Ahsyz Ia Ijkea If you have any questions, please do not hesitate to contact me.

Condition: as good as new (ex-display), Year of construction: 2026, Roll diameter: 500 mm Overhang of the support: 485 mm Cutting depth: 320 mm Table swiveling: yes, 0 to +20° Table size: 700 x 490 mm Belt speed: 18 m/min Motor power: 2 kW / 400V Motor brake: yes / automatic Ndodpfxozq Dchj Ahksa Dust extraction connection: 2 x 100 mm Machine length: 920 mm Machine width: 600 mm Machine height: 1880 mm Weight: 215 kg

Condition: like new (used), Exhibition / Demonstration Machine The new, state-of-the-art, robust band sawmill from Holzprofi is designed for log diameters up to 75 cm and offers numerous possibilities for cutting your wood and logs correctly. Highest cutting accuracy thanks to a cutting thickness calculator. Base galvanized, upper part powder-coated. Suitable for all types of wood, logs, or reclaimed wood. Comes with a trailer, approved for road use. Can be extended indefinitely with extension sections. CE certified. The original, not a replica! Technical Data: Max. log diameter 750 mm Max. board width 620 mm Motor output S6 7 kW (5.5 kW S1) Motor power, feed motor 0.37 kW Max. feed speed 17 m/min Ndjdpfx Aozqr Hzehksa Cutting length 4.2 m (infinitely extendable) Min. cutting length without aids 0.75 m Saw band length 4140 mm Saw band width up to 35 mm Diameter of band wheels 500 mm Band speed 13 m/sec Standard equipment: - Electric feed, infinitely adjustable - Electronic speed display - Electric height adjustment with electronic height display - Cutting thickness calculator with automatic movement to the specified height - Special device for setting the precise wood thickness - 2 base sections - 3 pieces of 90° angle stops - 3 pieces of log clamping devices - Band tension indicator - Bimetal saw band for all types of wood

Condition: used, CATALOG NUMBER 7585 Technical specifications: - wheel diameter: 630 mm - table dimensions: 850x810 mm - angle-adjustable table - motor: 3 kW - max cutting height: 320 mm - band-to-frame throat: 600 mm - dust extraction port diameter: 90 mm - brake - dimensions (L/W/H): 1300x830x2050 mm - weight: 420 kg Advantages: – Polish production – DTR documentation – very good condition – used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change) Ndjdpezhu Nysfx Ahkea

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19263.98, Offer 24149 Ndjdpfx Ahsvvim Teksa Technical data: - Cutting area at 90° round 320 mm - flat 300 x 270 mm - Material feed stroke up to 500 mm - Multiple strokes unlimited - Remaining piece length in automatic mode 125 mm - Saw band dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - Hydraulic lifting - lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure continuously adjustable 0 - 10 m/min - Hydraulic material vice - Chip conveyor - Saw band cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152855, Item 25078 Technical specifications: Ndjdpov Say Aofx Ahkoa - Cutting area at 90°: round 550 mm - flat 570 x 550 mm - Cutting speed continuously adjustable from 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure continuously adjustable from 0 to 10 m/min - Automatic material feeder - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW - Stop - 2 x roller conveyors 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) Ndedpfx Aoy Uzhfjhkoa - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: used, Year of construction: 2025, color: other, empty load weight: 1 kg, fuel type: gasoline, gearing type: other, NEW ROLL-OFF CONTAINER FOR AGGREGATES WITH SUPPORT FLOOR AND REAR OPENING WITH TWO SWING DOORS REF: 22-N-22 TYPE: Aggregates T NEW: Yes LID: No OPENING: Rear with two swing doors DIMENSIONS TOTAL EXTERNAL LENGTH: 5.80 m + 0.20 m beams EXTERNAL BODY WIDTH: 2.20 m INTERNAL / EXTERNAL FRONT SIDE HEIGHT: 1.20 m / 1.40 m INTERNAL / EXTERNAL REAR SIDE HEIGHT: 1.20 m / 1.40 m INTERNAL / EXTERNAL SIDE HEIGHT: 1.20 m / 1.40 m CAPACITY: 16 m³ WEIGHT: 2130 kg Ndodpfx Asv Aqbfshkoa FLOOR THICKNESS: 5 mm WALL THICKNESS: 4 mm COLOUR: grey RAL 7000 Displayed prices do not include VAT. Please contact our sales department for up-to-date prices and conditions. For more information: Loris: 3484773001 URL: #therolloffspecialists AURORA ROLL-OFF operates in the sale and purchase of industrial and commercial vehicles, mainly specializing in the waste management sector. Specialists in trucks, trailers, and roll-off equipment. With more than 50 trucks and over 150 roll-off containers – with and without cranes – available for immediate delivery. E.&O.E Given the large number of listings and details, Aurora kindly asks you to verify the accuracy of the information provided with our sales staff.

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Ndjdpfx Aswl D S Ushkoa

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Location: Nattheim Nsdpfxjw D Aw Hj Ahkjda

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Nodpfx Aexyiilehkoda

Condition: used, Year of construction: 1980, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Ndsdew D Aybspfx Ahkja

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Power supply: 400 V Nedpfx Ahszmu Nwjkoda Flexible speed control.

Condition: used, Used ERHARD+SPIESS vertical band saw model HK 3C with combined filing device. Throat: 300mm with Ideal band welding device. Saw blade/band length approx. 2,800mm, width 3-10mm Throughput 200mm Cutting speed 9-800m/min, adjustable in steps Drive 1,400 / 2,800 rpm Table angle adjustment: right/left 15° each, forward/backward 10° each Filing machine stroke approx. 0-120mm, workpiece thickness max. 80mm, strokes/minute 75-300 Ndjdpfxjwkuytj Ahksa Including 5 file holders with 5 different file shapes Delivery time: from stock. The machine can be inspected by appointment in 713334 Waiblingen Beinstein.

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, Equipment: CE marking, – DTR technical documentation in Polish Ndedpfx Aheyuf Tqekoa TECHNICAL PARAMETERS: – flywheel diameter: 815 mm – max. cutting height: 500 mm – max. cutting width: 800 mm – table dimensions: 1030 x 600 mm – table tilt: 0° – 20° – blade dimensions: 5643 x 38 x 0.65 mm – blade speed: 20 m/s – motor power S1: 4.5 kW – large tilting cast iron table – high-quality steel construction – precise bandsaw guidance system above and below the table – rubber-coated wheels for extended bandsaw blade life – overall dimensions (L/W/H): 122 / 77 / 254 cm – weight (net/gross): 680 / 770 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, -KASTOTwin AE 4 CNC automatic bandsaw -Cutting diameter: 400 mm -Overall dimensions: 400x400 -Single feed: 900 mm, multiple feed: x999 -Saw blade: 5009x34x1.1 (3 additional blades included, value approx. 1,000) -Automatic chip collector -Coolant pump -Documentation Nodezp Dpxjpfx Ahkoda -Original, very robust and certified roller tables: 1 receiving table, 200 cm, and 1 feeding table, 400 cm, for a total of 600 cm of roller tables -Machine is in good working order and ready for operation; can be viewed in Głosków, near Warsaw -Machine serviced until the end of 2025 -We can assist with transport arrangements -Weight: 2200 kg -Net price

Year of construction: 2026, condition: used, consisting of: 1 PAMMINGER Flyer 2.4 VA stretch wrapping unit, year of manufacture: 2009, serial number: M00812, 1 MESSERSI PR9 banding unit, year of manufacture: 2009, serial number: 3421, roller conveyor, protective enclosure, control system. Nodpfx Ahjzqzb Iskeda

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Njdjzqz T Rspfx Ahksda Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: used, Year of construction: 2005, machine/vehicle number: 0102-260023, The Behringer HBP 313 is a horizontal, double-column band saw for industrial metalworking. It is used for the precise cutting of solid materials, tubes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is continuously adjustable from 20 to 140 m/min. A coolant system with a 60-liter capacity and a band tension of 60 bar ensure high cutting quality and a long service life of the saw blade. The machine is powered by a 4.0 kW sawing motor. The electrical connection is 400 V / 50 Hz, and the control system operates with 24 V DC. With a weight of 1,960 kg, the HBP 313 ensures low-vibration operation and high processing accuracy. Technical data Working area Ø 310 mm / 500 × 300 mm Smallest material dimensions Ø 10 mm / 10 × 8 mm Smallest section length 8 mm Remaining piece length from 10 mm Cutting speed 20–140 m/min Coolant 60 l Band tension 60 bar Sawing motor 4.0 kW Hydraulic motor 1.5 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 7 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 14 A Fuse rating 25 A Ndedozq S Ilopfx Ahkoa Machine weight 1,960 kg Material support height 800 mm