Used Ball Rotation Apparatus for sale (9,837)

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 Lhedpfswx Dbpox Affor - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: excellent (used), axle configuration: > 3 axles, first registration: 11/2010, Year of construction: 2010, Rear axle 1: Lift axle; Steered; Tire profile left: 70%; Tire profile right: 70% Lhsdpjw I T Szofx Affsr Rear axle 2: Lift axle; Tire profile left: 70%; Tire profile right: 70% Rear axle 3: Tire profile left: 70%; Tire profile right: 70% Rear axle 4: Steered; Tire profile left: 70%; Tire profile right: 70% Rear axle 5: Lift axle; Steered; Tire profile left: 70%; Tire profile right: 70% Technical condition: very good Visual condition: very good Contact John de Koning for more information.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Lhodevn Tg Iepfx Affer Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, condition: new, Machine works well with various fruit, berry and vegetable juice and pulp. During the work process, the juice enters the machine through the spinning filtration sieve. This way excess pulp and sediments stay in the sieve and filtered juice enters the juice collection tank. The sieve spins continuously so juice can flow without interruptions. Output: 1000 L/h. Conical form of the filter facilitates the work process so the pulp is collected and removed easily. The washing of the filter is rarely needed because of convenient conical filter form. That is why washing can be done once per day. Rotational juice filter has an integrated juice collection tank which collects the juice. Juice collection tank has an automatic pump and liquid level control. When the tank is full, the pump automatically turns on and transfers the juice for further processing. Ledpfx Afjizbawsfohr Machine is made entirely from stainless steel. Rotational juice filter is mounted on wheels. Machine is especially simple to use and easy to maintain. This filter is often used after our DESTONE destoning & pulping machine to remove the pulp from the berries or other fruits and achieve uniform quality juice or puree.

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Manufactured new to order Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Electric tipping discharge Lhodsif Upfopfx Affer Capacity 50 Kg to 90 Kg according to product type 2 x Models

Condition: used, Year of construction: 2002, Operating terminal / Lhsdpfx Aeufxr Eoffor

Condition: used, Year of construction: 2023, Tandem axle Air brake PTO shaft 20-piece / Varioterminal 9-inch bale chute / / Lhsdpfx Aotlrnajffjr

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Spray head, lifting lugs Design: vertical Remarks: Minor dents in insulation jacket; some small cracks in the weld seams of the feet (see photos); 1 tank with nameplate (the outlet end of this tank is cut off) Speed: 42 rpm Outer diameter: 2,100 mm Lhodexqc Szjpfx Affsr Inner diameter: 2,000 mm Total height: 4,550 mm Insulation: present Power: 2.2 kW Agitator: Beam agitator Support type: Feet Location: Bremen Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: Dairy TANK Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in top head Outlet: 65 mm MATERIAL SPECIFICATION Feet material: Stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head Agitator features: Tanks with different impeller diameters; 1 tank with bottom bearing, the other tank without

Condition: excellent (used), functionality: fully functional, mileage: 112,617 km, power: 350 kW (475.87 HP), gearing type: automatic, fuel type: diesel, mast type: telescopic, Year of construction: 2017, operating hours: 4,795 h, Superstructure operating hours: 8,896 h Lsdpfx Afoxg Ewfsfohr Undercarriage operating hours: 4,795 h As of 30.09.2025. Crane remains in operation. Counterweight trailer

Condition: new, functionality: fully functional, Year of construction: 2022, ATEX rotational valve, 1,5kw- 18rpm. Special heavy duty. SEW drive with cooler fan. Special knive system. Lsdpex Dzc Ejfx Affehr Special 5 line sleeve system. Inert gas adding hole. Possible to buy 2 new, and 5 slightly used valves.

Condition: repair required (used), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Product Description: For sale is a HAAKE RheoStress 6000 rotational rheometer by Thermo Scientific – a high-precision measuring instrument for rheological characterization of a wide variety of materials. Ideally suited for use in research, development, or quality control. The device is not operational, however, as the air bearing is defective. Lhjdpswv Nrhefx Affjr Technical Specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 rpm Speed range (CS mode): 10⁻⁷ to 1500 rpm Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special Features: Very high measurement accuracy due to low mass inertia Precision lift mechanism (0.5 µm adjustment accuracy) Modular expandability (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of Delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) If you have any further questions, feel free to contact us by phone.

Condition: excellent (used), - Dimensions: 2480x1000x1450 mm - Year: 2006 - Packaging material: PVC, polyolefin, polyethylene, polypropylene - Maximum product length: 680 mm - Maximum product height: 220 mm - Product weight: 0.25–10 kg - Maximum roll diameter: 600 mm Lhedpfxswyc Uds Affsr - Sealing arm dimensions: 490 x 390 mm - Voltage: 400V - Weight: 360 kg - Overhauled equipment: The machine is prepared upon order; collection and return times are arranged at that moment (please request the price after overhaul).

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Lhjdpfoff Sbiex Affjr Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2021, operating hours: 10 h, condition: like new (used), functionality: fully functional, Kinexus lab+ rotational laboratory rheometer, configured with C25 cylinder package and 50N force cell, ideal for standard rheological applications in research and quality control. Lhjdpfxexp H Uke Affsr This equipment is designed for analyzing the rheological behavior of liquid and semi-solid materials, including viscosity, flow, thixotropy, and oscillatory testing. The lab+ platform offers precise control, thermal stability, and an intuitive interface, making it suitable for laboratories in the chemical, food, cosmetic, pharmaceutical, and polymer industries. Key features: Nsbk Rewp Inbslfcpsda Model: Kinexus lab+ C25 cylinder package - ideal for cylindrical (Couette) geometry measurements Maximum normal force: 50N - for sensitive applications and materials with low shear resistance Robust construction and high precision Compatible software for advanced control and analysis Available immediately

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 22359, Equipment: UVV, Compact design allows storage and transport in the smallest of spaces. The ideal solution when large amounts of light are temporarily needed. Suitable for all types of lighting applications, such as construction sites, roadworks, events, film and photography, or securing hazardous areas. The light balloon can be mounted on work machines and thus ideally illuminates the operating area of the equipment. Energy-saving LED technology with high light output. Ledpfx Afoxn S Duefohr

Condition: used, Additional title: in various designs Lhsdpsw Dy E Uofx Affjr

Year of construction: 2011, condition: ready for operation (used), A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available. Lhsdpfx Afer Eqvdefer

Year of construction: 2006, condition: like new (used), automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph Ljdpfodzrvisx Affjhr

Condition: as good as new (ex-display), operating hours: 1 h, Crate and basket washing machine. Plc controlled washing and drying tunnel for parts cleaning. Operating Principle : This is a worldwide patented machine which has a special procedure for washing and drying. (Patent number : 2016 / 02545) After the basket (or part like KLT, box etc.) is placed over the loading conveyor, a special unit locks and draws the basket inside the washing tunnel (auto loading) and once the basket is inside the machine spray washing begins. Basket is rotated 360 degre on its own axis while washing and drying. Rotation movement provides perfect washing and drying for the parts. All of the washing process is controlled via PLC. Machine has 2 washing unit , 2 rinsing unit and 1 drying unit. Cycle time : 30 seconds for 1 basket or KLT box Loded Izzxepfx Affohr Machine external dimensions : 12500 mm (length) Dimensions of basket: 600 x 400 mm , Height (adjustable) : Max : 280 mm Heating : Electrically heated with resistances. Washing pumps : Heavy duty stainless steel washing pumps. Automatic liquid fill valfes and liquid level control for all tanks. Machine will be manufactured according to your technical specifications. Please feel free to contact us for further details.

Condition: ready for operation (used), 1) Electr. engine 5 kW 2) Vibrating dispenser, 3) Original STADLER construction (approximately 12 tons) Everything works and is ready to work - to check on site. Video on demand. Location; Poland Lhodpfx Afsiau S Dsfor

Condition: new, Year of construction: 2025, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Ljdpfx Aodwqiusffehr Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters.

Condition: new, ABEL valve ball for ABEL piston diaphragm high-pressure pumps. NEW ! We are your supplier for used and new piston membrane high-pressure pumps / filling pumps for chamber filter presses, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice. Lhodpjiyqitjfx Affor

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Automatic last rotating Lodpfx Afox D Scvefohr Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Lsdpfjxmlinsx Affshr

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear incline, side-adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking according to regulation, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic ramp adjustment = price: 1,000 €, -- Subject to misprints, errors and changes, sample pictures --, More data at: !, More details: ! Ledpfx Aex Nwmaoffshr