Used Bale Breaker for sale (980)

Condition: like new (used), NNP fruit breaker Nlsdpfx Ahskyr Iyjkef Stainless, variable speed infeed conveyor, 370mm belt width, previously used on blocks of fruit, mobile, 3Ph

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed Nlodpjyyy Dpofx Ahkof - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. Nljdpfx Aoxfl Izjhksf The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, Nlsdpfevvk T Ijx Ahkef serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Nljdpov Al Tiofx Ahkof Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: ready for operation (used), Vertical baler Dixi 50S PET Year of manufacture: 2019-2021 Bale dimensions (L x W x H) (mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Njdpfev Amtkex Ahkelf Technical data (L x W x H) (mm): 1600 x 1300 x 3100 Filling opening (mm): 1200 x 670 Pressing force: 50 tons Power supply: 400 V

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Nsdpfov Ai Tgox Ahkelf Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR Nljdpfx Aora Aghshksf

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Nedpfx Asra Nrxshkslf Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: good (used), - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 Bale length: 1,100 mm Bale width: 750 mm Bale height: 750 mm Press length: 5,640 mm Press width: 1,674 mm Press height: 2,500 mm Weight: 4,450 kg - Motor power in kW: 9 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2013 HSM HL 4010 LI baler - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 - Motor power in kW: 9.5 Nedpfxsv Amv Ej Ahkelf - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2012

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 386, pressing force: 50 t, filling opening width: 1,110 mm, filling opening length: 1,050 mm, bale width: 1,050 mm, bale height: 730 mm, bale weight: 425 kg, total width: 2,100 mm, total height: 3,100 mm, total length: 5,000 mm, overall weight: 6,800 kg, transport height: 2,400 mm, power: 22 kW (29.91 HP), The press was replaced by a larger one. It was used normally until dismantling. All functions were fully operational. The press is located at Chemnitzer Str. 96, 09212 Limbach-Oberfrohna. Nlodpfx Aoypb Awohksf

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Nedoyqw Sqspfx Ahkjlf Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: ready for operation (used), functionality: fully functional, pressing force: 38 t, MPC 20 PE compactor container Nodeyiltqepfx Ahkjlf

Condition: new, Attachment suited for: Agricultural machines Njdpfxjyauixe Ahkolf

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,308 h, functionality: fully functional, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Nlsdpfxoxuqv Ne Ahkjf Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately

Condition: not inspected (used), Year of construction: 2005, Scraper conveyor: 5m Width: 0,55 m Njdsd H Twiepfx Ahkolf Height: 0,5m Inner width: 0,38m Carrier divide: 500mm Belt incline: 30° Drop height: 2,5m with swivelling slewing ring without engine

Condition: used, 7 pieces for sale! Nodpjxq Nvyjfx Ahkolf Condition: Used, dismantled from decommissioned equipment. Untested. The item shows normal signs of use. Technical Data: Manufacturer: ABB Model/Type: VD4 36.12.32 Serial No.: 1VC1BF00013886 Year of Manufacture: 2015 Classification: M2 Standards: IEC 62271-100 / CEI 17-1 Weight: 170 kg Rated Voltage (Ur): 36 kV Rated Lightning Impulse Withstand Voltage (Up): 170 kV Rated Short-Duration Power-Frequency Withstand Voltage (Ud): 70 kV Frequency: 50 Hz Rated Normal Current (Ir): 1250 A Rated Short-Time Withstand Current (Ik): 31.5 kA Rated Short-Circuit Duration: 3 s Rated Short-Circuit Breaking Current (Isc): 31.5 kA Rated Short-Circuit Making Current (Is): 79 kA DC Component at ≤30% Voltage: 50 A Operating Sequence: O–0.3s–CO–3min–CO Wiring Diagram: 1VCD400236 Drive Supply Voltage: 220 V (EL3, MBC, MBO1, MBU, MAS) Origin: ABB, Italy

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Njdjxy Idhopfx Ahkslf Available immediately

Condition: new, Attachment suited for: Agricultural machines Nlsdpeyaud Nofx Ahkef

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Njdpfx Ahjyacyxekelf

Condition: used, Used Crusher for Filter Cake / Lump Breaker Nedpobpia Dofx Ahkolf Drive: Lenze The crusher for filter cake or lump breaker consists of two horizontal rotating shafts.

Condition: excellent (used), Year of construction: 2022, operating hours: 8,856 h, functionality: fully functional, working length: 12,000 mm, Press Refurbished 12m length Everything in perfect condition Operational Nljdpfx Ahexfg Sbekjf Located at company headquarters.

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Nedpfjxy Hbxex Ahkslf Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS, PAPER PRESS, FOIL PRESS, BALING PRESS Immediately ready for use, good condition Used & good / see photos Model: HSM 500.1 VL Machine No. 6135.244.P Serial No. 220109689 Pressing force 50 tons V 400; Hz 50 kW 7.5 Amps 15.5 Pressing power 6 tons Year of manufacture 2001 Nlsdpslc Du Njfx Ahksf More presses in our other offers Item used and good / roughly cleaned (Plug it in and you're ready to go) Dimensions: On request!! Additional photos show further possible uses. All items shown in the photos are also available from us. Price quoted net per piece upon collection from warehouse 47441 Moers Current stock: 1 piece Inspection is expressly offered. More equipment in stock see photos or inquire by phone General: We are offering articles from various acquisitions, which we describe as well as possible and provide informative photos. No further information can be provided about the item. We offer the possibility of inspection on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone appointment. If required, the item can be taken away immediately. Due to time constraints, we can only answer questions about this item if you provide us with a telephone number in your inquiry. Unless explicitly stated, this offer is for USED GOODS. Any packaging may be damaged. Items have been visually inspected and are technically in order as far as possible. All offers are ex warehouse 47441 Moers. If you would like shipping, please contact us to discuss packaging and shipping costs. If you are interested, please do not hesitate to call us. All dimensions are approximate. Errors and omissions in the description are expressly reserved.

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Nlsdpfx Ajxy E Siehkof Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb