Used Bakery Raw Materials for sale (18,800)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,776 h, load capacity: 200 kg, mast type: telescopic, lifting height: 15,000 mm, lifting power: 230 kg/m, platform length: 700 mm, platform width: 1,400 mm, overall weight: 1,550 kg, empty load weight: 1,550 kg, transport length: 4,100 mm, transport width: 800 mm, transport height: 1,940 mm, construction height: 1,940 mm, fuel type: hybrid, fuel tank capacity: 7 l, color: red, We are offering this used Cela DT15 Spyder tracked platform, manufactured in 2016, for sale. Maximum reach: 7.50 m Minimum working height: 15 m Load capacity: 230 kg Rotation angle: 360° Hybrid: Honda GX440 gasoline engine + electric Self-leveling Additional options: 220 V + compressed air/water line in the work platform Width: 80 cm (without work platform) Height: 194 cm Weight: 1550 kg + 4 outrigger plates Never rented out, first owner Major service performed in December 2025 + new starter battery Hnedpfxjzv Ik Ho Aitsu An IFOR WILLIAMS 3.5 T low-loader trailer is also available for sale (EUR 2800 + VAT). If you have any questions or would like more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Hedpfxezycako Aitenu Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: new, ### Hitachi ZX210 / ZX250 Long Reach Boom-Arm Set – Custom Manufacturing Hnjdpezzfbgjfx Aitsu We manufacture long reach boom and arm sets for Hitachi ZX210 and ZX250 excavators, designed according to the required working depth, reach, bucket capacity, and operating conditions. Our production range includes long reach boom-arm systems for various excavator brands and models. Each set can be supplied with compatible pins, bushings, hydraulic cylinders, hydraulic lines, linkage components, and a suitable digging bucket, depending on the customer’s requirements. If you are also looking for a complete excavator, we can research suitable new or used machines available in the Turkish market and offer the machine together with the long reach conversion. Please contact us for detailed technical information, available configurations, pricing, and delivery time.

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2443818, load capacity: 454 kg, lifting height: 13,610 mm, platform length: 910 mm, platform width: 2,440 mm, overall weight: 8,623 kg, transport length: 9,470 mm, transport width: 2,480 mm, transport height: 2,590 mm, fuel type: diesel, color: blue, Equipment: UVV, Technical specifications Hnodpfsyqzrusx Aiteu Year of manufacture: 2018 Engine: diesel Working height: 15.61 m Platform height: 13.661 m Platform dimensions (L x W x H): 0.91 m x 2.44 m x 2.59 m Overall dimensions (L x W x H): 9.47 m x 2.48 m x 2.59 m Load capacity: 454 kg Slewing range: 160° Basket arm length: 1.52 m Driving speed: 1.1 - 3.28 km/h Climbing ability: 45% Weight: 8,623 kg Overall condition: typical used condition, UVV

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Hedov Tctuopfx Aitonu

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Hnodpfxjwih Aro Aiteu

Condition: used, 9 St. ca. 750 x710x1020 mm weight 180 kg Colour 6011 RAL Large drawer usable space ...x... mm Full extension drawer runners (VA) 100% 2 drawers with internal height 30 mm 2 drawers with internal height 55 mm, 2 drawers with internal height 80 mm, 2 drawers with internal height 130 mm Ball bearing drawer runners Individual pull-out stop Hedpfsy A Tb Tex Aitsnu Individual locking possible for each drawer TÜV GS tested Drawers flush with cabinet, recessed handles

Condition: excellent (used), functionality: fully functional, mileage: 65 km, power: 29.2 kW (39.70 HP), fuel type: diesel, color: red, overall weight: 5,190 kg, empty load weight: 5,190 kg, number of seats: 1, first registration: 06/2017, mast type: free lift with telescopic boom, brakes: engine braking, suspension: hydraulics, Year of construction: 2017, operating hours: 3,876 h, machine/vehicle number: JKUU1555L00W12507, Equipment: rubber tracks, Manufacturer: KUBOTA Corporation (Osaka, Japan) • Excavator model: KX155-5 • Year of manufacture: 2017 • Product identification number (PIN/VIN): JKUU1555L00W12507 Technical specifications • Operating weight (including a 75 kg operator): 5,190 kg Hedpfx Aijz Iqc Tstsnu • Power: 29.2 kW

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W PRAWEMA 2006 SYNCHROFINE 205 HS Hedovm Efajpfx Aitonu

Condition: good (used), Offered as part of a business liquidation is a drawer cabinet. Manufacturer: Dick Lista 18 drawers Filled with trapezoidal thread cutters, drill rods, round thread steel, and more. Additional photos available upon request. Hsdpfx Aisf Ezdvstsnu Drawers with roller bearings. Weight: approximately 700 kg External dimensions: approximately 1510 x 720 x 750 mm --without key--

Year of construction: 2020, condition: new, The ROMER company is also involved in the production of suspended transport systems. Cross traverses (Cross transports) are designed and manufactured for specific installations Oghxp Hnedpfx Aisfz Dibotou Examples of equipment are presented below: Transport systems Depending on the customer's requirements, the transport systems can move on the floor or be hung on poles. - For comfortable solutions for manual installations, we recommend suspended crossbeams (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have, for example, several cabins with different colors, flexible solutions are used with the use of a power-and-free conveyor. This is the most expensive solution.

Condition: new, Year of construction: 2025, The machine is available immediately from stock. FRONTEQ Type: FS0610TL Load capacity: 230 kg Load capacity, platform extension: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extension: +0.89 m Transport dimensions: 2.27 m x 0.96 m Height: 2.14 m Height with guardrails folded down: 1.67 m Weight (approx.): 1780 kg Working height: 8 m Platform height: 6 m Automatically leveling outriggers Retractable outriggers Bright, non-marking tires. Climbing capacity up to: 30° Overload protection: Drive via 24 V / 2 x 85 Ah battery Integrated 24 V / 36 A charger German operating manual included 2-year manufacturer's warranty The machine is also available without outriggers. Affordable financing options, such as lease-to-own or leasing, can also be offered. For further data, delivery time, and availability, please inquire. Hnedpfehu A Dwjx Aitou Depending on availability, the machine can be inspected and test-driven at our warehouse.

Condition: new, fuel tank capacity: 465 l, operation weight: 27,000 kg, breakout force: 170 kN, The SY265C is in its element under tough conditions on the construction site. Its undercarriage and solid boom provide advantageous stability even when working at full power. Hodpfx Aisgmthkjtonu

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate Hnodpfxofuangj Aiteu

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet Schäfer, drawer cabinet sturdy design -1 drawer/ 2 borders: Layout/height see photos -Cabinet door: lockable Hnsdeud Utiepfx Aiteu -Quantity: 1 piece available -Dimensions: W x H x D 500/500/1000 mm -Weight: 29 kg

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2004, operating hours: 5,240 h, machine/vehicle number: YA01-00297, Equipment: cabin, Product Description Used Crane For Construction Manufactured by Kobelco Model CK90UR Year 2004 Hour 5240 hr Operates on Diesel Engine Machine sold as its condition More information please contact VIJAY Hjdpsul U Ahjfx Aitsnu JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 1990, machine/vehicle number: 50222, Equipment: cabin, hydraulics, Product Description Used crawler Dozer Hsdpsumq Dqefx Aitonu Manufactured by Komatsu Model D155A-2 Crawler moving type Operates on Diesel Engine Machine sold as its condition More information please contact VIJAY JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: good (used), functionality: fully functional, power: 64.72 kW (87.99 HP), fuel type: diesel, color: yellow, drive condition: 90 %, number of seats: 1, Year of construction: 1998, machine/vehicle number: 3YS00993, Equipment: cabin, hydraulics, Product Description Used mini Excavator machinery Manufactured by caterpillar Model 308BSR excavator Operates on Diesel Engine Machine sold as its condition More information please contact VIJAY Hnjdpfx Aioum D R Dsteu JPN Industrial Trading Pte ltd 13A pandan crescent, Singapore 128478

Condition: used, Technical details: diameter of piston: Ø 160 mm Hnsdpfx Aiou Nurfotju weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *

Condition: good (used), The scope of delivery includes: 01x U- collision protection, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 100 x 50 mm profile dim. outside: U: approx. 80 x 40 mm material thickness: approx. 6,00 mm base plate dim.: approx. 200 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 04 pcs. Your contact person in our company: Mr.: Andre Evering Hnedsn R Edmopfx Aitju Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), Lista drawer cabinet with milling tools Lista drawer cabinet Number of drawers: 13 Drawer type: Full extension Very high load-bearing capacity due to the precise and stable construction made of high-quality, welded sheet steel Body color: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal circular saw blades Disc milling cutters, cross-toothed & coupled Hnjdpfx Aieq Aa I Tjtju Disc milling cutters, cross-toothed Angle half-round milling cutters Dovetail milling cutters Half-round milling cutters Thread milling cutters More items - new and used - can be found in our shop! International shipping costs available upon request!

Operating hours: 12,000 h, condition: good (used), functionality: fully functional, Raster press punching line which includes: 1) Dimeco Alipresse type 2330DF unwinder with SV tracking and speed change system. 2) Dimeco Alipresse type 1645 powered straightener with SV tracking and speed change system. Hnsdpsryu Tajfx Aitsu 3) Raster eccentric press Type HR 60 SL-4 S with soundproof enclosure . Parameters in the photos. 4) Documentation.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, operating hours: 600 h, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 35 t, stroke length: 300 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 60 mm, table height: 100 mm, clearance between the columns: 1,375 mm, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, overall weight: 4,900 kg, controller manufacturer: Lenze, controller model: SafanDarley E-Control, working width: 1,275 mm, bending force (max.): 35 t, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 1,375 mm, height adjustment type: electric, installation height: 1,000 mm, warranty duration: 12 months, control type: CNC control, number of axes: 7, actuation type: electric, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Hsdpfxjr Axxzo Aitenu Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: used, Year of construction: 1996, operating hours: 2,867 h, For sale: Long Front Tracked Excavator used ! Type: Volvo EC 230B KW: 122 Boom: 17 m Hydraulic connections and pump technology Year of construction : 1996 Weight :: 23,5 T Operating hours: 2867 Hnedpfx Aiermkm Seteu The crawler excavator is in working order, usual signs of use. Location: Essen

Year of construction: 1981, condition: like new (used), Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used. Technical data: Year of manufacture: 1981 Pressing capacity in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table size (lxb) in mm: 1600 x 1300 Ram size (lxb) in mm: 1500 x 1300 Daylight in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6,3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power consumption in kW: 150 Overall size (lxbxh) in mm: 3550 x 1200 x 5940 Total weight in kg: 50000 Hnodsd Ntd Dopfx Aiteu